Aermotor w/mag hooked up to pump w/walking beam and on cart, starts easy and runs good, $1200; Ron Shipman nnn-nnn-nnnn lv msg or cell nnn-nnn-nnnn or xxxx@xxxx.xxx (Kingsburg CA)
Aermotors: two on one cart, can be separated, etc. One w/mag, one w/o mag, $1900 for all or ?; Ron Shipman nnn-nnn-nnnn lv msg or cell nnn-nnn-nnnn or xxxx@xxxx.xxx (Kingsburg CA)
Alamo 3 hp, early, with Webster mag, barn fresh original paint, runs, $1500. Can send pictures on request; Craig Mathews nnn-nnn-nnnn or xxxx@xxxx.xxx (Northridge CA)
Alpha De Laval 3 hp (early) with rotary magneto. Original paint, runs fine. No breaks or welds, $1500 obo. Pictures on request; Craig Mathews nnn-nnn-nnnn or xxxx@xxxx.xxx (Northridge CA)
Brantford Cub 2 hp, sn 78468, no tag. Webster mag and ignitor. Canadian engine built by Goold, Shapley and Muir. Has been painted with primer. Rocker arm bracket has been repaired, $650; Kathy Repp nnn-nnn-nnnn or xxxx@xxxx.xxx (Snohomish WA)
Buda YTU, WTU, KBU1, TU, HTU; Buck nnn-nnn-nnnn or nnn-nnn-nnnn (Ellensburg WA)
Bull Dog 1-1/2 hp. Re-tagged Baker & Hamilton. Push rod and ignitor trip are re-cast. This is an earlier engine, (1913). $1500 obo. Will ship using Fastenal. Buyer pays for shipping. I will crate and deliver to local Fastenal or local pickup; Jim Beeler nnn-nnn-nnnn or xxxx@xxxx.xxx (Tacoma WA)
Bull Dog 2-1/2 hp Fairbanks with cart. Ignitor repaired? Non-original muffler. Light on compression, valves could use cleaning. $1400 obo. Will ship using Fastenal. Buyer pays for shipping. I will crate and deliver to local Fastenal or local pickup; Jim Beeler nnn-nnn-nnnn or xxxx@xxxx.xxx (Tacoma WA)
Bull Dog 2-1/2 hp with a very nice cart. Early engine with raised letters in half moon shape. Some reproduction parts. Should not take too much to get this one running, $1500 obo. Will ship using Fastenal. Buyer pays for shipping. I will crate and deliver to local Fastenal or local pickup; Jim Beeler nnn-nnn-nnnn or xxxx@xxxx.xxx (Tacoma WA)
Bull Pup 1-1/2 hp. Hard to find this type of Bull pup made by Bull Dog. New gas tank. Muffler might be a recast, I am not sure, $3500 obo. Will ship using Fastenal. Buyer pays for shipping. I will crate and deliver to local Fastenal or local pickup; Jim Beeler nnn-nnn-nnnn or xxxx@xxxx.xxx (Tacoma WA)
Carburetors, old: a) Rayfield, all brass, Model L2, 1 1/4 venturi, patented 2/20/1911. b) Kingston, brass carburetor with steel bowl, Model L3, 1 3/16 venturi, patented 3/9/1915. c) Zenyth Model T4X, 1 5/32 venturi, patented 2/29/1908; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
Chrysler Industrial 6 cylinder flat-head engine from old combine. Ran when it was put in storage. $180 or good offer; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
Cushman 2 hp, lots of compression and runs good, on a cart, $600; Ron Shipman nnn-nnn-nnnn lv msg or cell nnn-nnn-nnnn or xxxx@xxxx.xxx (Kingsburg CA)
Cushman 5-6 hp, very nice restoration. Pretty little engine. On a skid with radiator, water pump, belt drive fan, clutch with flat belt drive pulley, $900. Can deliver to Woodland CA late October. Text or emailed photos on request; Ed nnn-nnn-nnnn or xxxx@xxxx.xxx (Reno NV)
Delco 1 cylinder light plant, $400; Joe Salazar nnn-nnn-nnnn (Albuquerque NM)
Economy by Briggs and Stratton, Sears #500 205515 (Model N.) Complete, has Economy decals, ran when parked, $75. See description and photo of one with B &S decals at https://tinyurl.com/yba69z6j. See one run (not mine) at https://tinyurl.com/yd329jbm Jerry nnn-nnn-nnnn or xxxx@xxxx.xxx (Cashmere WA)
Fairbanks 1-1/2 hp, hopper condenser cooler. Needs work, stuck $225 or offer; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
Fairbanks 3 hp Z engine with some old restoration work, has mag, $275; Dave nnn-nnn-nnnn (Aurora OR)
Fairbanks 3 hp Z Style C, sn 378E68, fully restored, throttle governed, $450. Email for pictures and details; Kathy Repp nnn-nnn-nnnn or xxxx@xxxx.xxx (Snohomish WA)
Fairbanks 6 hp and Fairbanks 3 hp engines, $360 each or good offer; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
Fairbanks Morse 20 hp Z tank-cooled engine built in 1920, on iron wheel cart. Completely restored and painted. Running. Has been shown at several shows. Few of the 20 hp are still around, $8000. Will bring to the Woodland swap meet if it hasn’t sold. See video on Facebook Wilbur Reil nnn-nnn-nnnn (Davis CA)
Fairbanks Morse 6 hp Z. Mounted on cart, $500; Ronnie Crevolin nnn-nnn-nnnn or xxxx@xxxx.xxx (Madera CA)
Farm Master (Sears, made by Cushman) Two complete engines for $500. One is 3 hp one is 2 hp. Both are complete, free turning, and ran when parked. See one run (not mine) at https://tinyurl.com/yaogzazf Jerry nnn-nnn-nnnn or xxxx@xxxx.xxx (Cashmere WA)
Fuller Johnson (large) on cart, in very good shape, $1000; Ron Shipman nnn-nnn-nnnn lv msg or cell nnn-nnn-nnnn or xxxx@xxxx.xxx (Kingsburg CA)
Fuller Johnson Farm Pump engine, late style, nicely restored. Can sell with a mostly finished drop cart with Fuller Johnson cart wheels, $1200 with cart or $850 without cart. Can send pictures on request; Craig Mathews nnn-nnn-nnnn or xxxx@xxxx.xxx (Northridge CA)
Fuller Johnson, 1-1/2 hp on cart, runs okay, $400; Ron Shipman nnn-nnn-nnnn lv msg or cell nnn-nnn-nnnn or xxxx@xxxx.xxx (Kingsburg CA)
International 3 hp Vertical Famous. 1908, thermo siphon cooled, bored and sleeved and new rings. Needs to be run for a while to seat the rings. Nice engine, comes with buzz coil. $2650 obo. Will crate and take to Fastenal or pick up local in Tacoma Wa. Buyer pays for shipping; Jim Beeler 253 531-5106 or xxxx@xxxx.xxx (Tacoma WA)
International Famous 1 hp. Has butter churn gear and pulley. The only fix that I can see is where the muffler screws into the head. $1700 obo. Will ship using Fastenal. Buyer pays for shipping. I will crate and deliver to local Fastenal or local pickup; Jim Beeler nnn-nnn-nnnn or xxxx@xxxx.xxx (Tacoma WA)
John Deere 1-1/2 hp E. Looks very original, I don’t think it has ever been restored. Loose, but I will not try to start it. That will be the buyers privilege. On skid, $1100. Text or emailed photos on request; Ed nnn-nnn-nnnn or xxxx@xxxx.xxx (Reno NV)
Lawson 2 hp, original paint, solid flywheels, sn 80213, $350. Email for pictures and details; Kathy Repp nnn-nnn-nnnn or xxxx@xxxx.xxx (Snohomish WA)
MacLeod 1-1/2 hp with EK Mag. Nice running engine, $800 obo. Will ship using Fastenal. Buyer pays for shipping. I will crate and deliver to local Fastenal or local pickup; Jim Beeler nnn-nnn-nnnn or xxxx@xxxx.xxx (Tacoma WA)
Monitor with attached pump on cart, good shape $800; Ron Shipman nnn-nnn-nnnn lv msg or cell nnn-nnn-nnnn or xxxx@xxxx.xxx (Kingsburg CA)
Murphy diesel, 6 cyl, model MP24T, $500; Jim Bain at nnn-nnn-nnnn (Olympia WA)
Novo Square Hopper, KU 2 X 4 , sn 9447, stuck but everything intact including magneto, worth this much as parts, $225; Kathy Repp nnn-nnn-nnnn or xxxx@xxxx.xxx (Snohomish WA)
Olds 1-1/2 hp, Model A. Reproduction mixer, non-original muffler. Engine runs good. Have new decals, $3500 obo. Will ship using Fastenal. Buyer pays for shipping. I will crate and deliver to local Fastenal or local pickup; Jim Beeler nnn-nnn-nnnn or xxxx@xxxx.xxx (Tacoma WA)
Pulley: Fits up to 12 hp Economy. Bolt on. $75. Email for pictures and details; Kathy Repp nnn-nnn-nnnn or xxxx@xxxx.xxx (Snohomish WA)
Samson engines for sale: Samson 10 hp complete except for the gas bowl. Has not been painted. On iron wheel cart. It has been running on propane, $9000. Samson 8 hp complete except for the splash plate in back. Has not been painted. On iron wheel cart. Has been running on propane, $7500; Wilbur Reil nnn-nnn-nnnn (Davis CA)
Sattley 1-1/2 hp, restored, solid flywheels, sn 50372, brass tag, $350; Kathy Repp nnn-nnn-nnnn or xxxx@xxxx.xxx (Snohomish WA)
Seal P-20 15 cc 4 cylinder flathead kit 9 aluminum castings and prints, $150 obo. Seal P-29 15 cc 4 cylinder overhead valve kit 8 aluminum castings and prints, $150 obo; Jerry Logan nnn-nnn-nnnn xxxx@xxxx.xxx (Downey CA)
Simplicity, 3 hp; Chuck Wallace nnn-nnn-nnnn (Toledo WA)
Standard Gas Engine, 4 hp, sn 2863; Chuck Wallace nnn-nnn-nnnn (Toledo WA)
Stover 2 hp KA with cart, $500; Joe Salazar nnn-nnn-nnnn (Albuquerque NM)
Stover 4 hp. Stuck, missing ignitor and mag. Needs the head and rocker arm bracket repaired. Has a pulley on each side of the engine, one larger than the other. The large pulley has a crack. Use for parts or restore it, $400; Jim Beeler nnn-nnn-nnnn or xxxx@xxxx.xxx (Tacoma WA)
Tom Thumb (air cooled), 1 hp, no cart, $950 obo. Will ship using Fastenal. Buyer pays for shipping. I will crate and deliver to local Fastenal or local pickup; Jim Beeler nnn-nnn-nnnn or xxxx@xxxx.xxx (Tacoma WA)
Waukesha ECU engine, 31 / 4x4, G-20759 1750LD, clutch and pulley, $540 or good offer; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
Wisconsin engine, small $85; Don Chappell nnn-nnn-nnnn (St Helens OR)
Wisconsin V4 engine. Ran when it was put in storage, $315 or good offer; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
Wisconsin V4 engine. Stuck. Electric start, $90 or good offer; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
Witte 4 hp, sn 184915?, fully restored on oak skids, throttle governed, oak battery box, $650. Email for pictures and details; Kathy Repp nnn-nnn-nnnn or xxxx@xxxx.xxx (Snohomish WA)