September 2017 - Engines & Parts For Sale

All Classified Ads

Associated 1-3/4 hp, sn 30566, Chore Boy hopper-cooled engine on steel wheeled cart. Complete, new Associated gas tank, new ignitor. Not much compression. Extra parts engine included, $650; Rich Hanna nnn-nnn-nnnn (Hayden ID)

Bulldog 1-1/2 hp in excellent condition. Made by Bates and Edmonds for Baker and Hamilton, San Francisco. Sumpter magneto. Original muffler. Splash guard, gear guard, brass grease cups. Original starting crank. Older restoration with a few small paint chips. Shows very well, red with silver head. Wadsworth lubricator, $2000 or $2350 with cart. Call for more photos; Joe Olsen nnn-nnn-nnnn (Paradise CA) [see 2 photos]

CA Engine. Commercial 60 hp tank-cooled engine made in Los Angeles, CA. in 1915. Only known 60 hp type C engine. Runs well on propane. Easy to start with air. I have started it in the past throwing it back against compression. This 8-ton engine is mounted on a 3 axle dedicated gooseneck trailer (CA license). Electric start gas air compressor for starting. A 6-inch United Pump made in Oakland, CA is belted to the engine and can pump water for shows. The engine has not been painted. Has been shown at several shows. Complete unit is $18000. Will sell the engine separate for $13000. See video on Facebook; Wilbur Reil nnn-nnn-nnnn (Davis CA)

Carburetors, old, have three: Rayfield, all brass, model L2, 1-1/4 venturi, patented 2/20/1911. Kingston, brass carburetor with steel bowl, model L3, 1-3/16 venturi, patented 3/9/1915. Zenyth model T4X, 1-5/32 venturi, patented 2/29/1908; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Carts: steel wheel carts for 6-10 hp engines, have two, $150 and $350; Bruce Heppler nnn-nnn-nnnn (Covelo CA)

Economy 1-1/2 hp JK, with good Wico mag on cart. Not running, stored inside, $300; Rich Hanna nnn-nnn-nnnn (Hayden ID)

Economy 7 hp, 1920, easy start - pulls slow, on custom 6" drop center steel cart, all pin striped, $2500 obo, seven other engines available; Dale Somers nnn-nnn-nnnn (Medford OR)

Ellis 3-6 hp engine parts, have a cylinder, rod and cap, intake manifold and some other parts. May do trades; Nathan Kehler nnn-nnn-nnnn or xxxx@xxxx.xxx (Newgate BC)

Fairbanks 1-1/2 hp, hopper condenser cooler. Needs work, stuck, $250 or offer; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Fairbanks 6 hp and Fairbanks 3 hp engines, $400 each or good offer; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Fairbanks Morse 1-1/2 hp headless on iron-wheeled wagon. Good runner; Ron nnn-nnn-nnnn or xxxx@xxxx.xxx (Auburn CA)

Fairbanks Morse 20 hp Z tank-cooled engine built in 1920 on iron wheel cart. Completely restored and painted. Running. Has been shown at several shows. Few of the 20 hp are still around, $8000. See video on Facebook; Wilbur Reil nnn-nnn-nnnn (Davis CA)

Fairbanks Morse 25 hp Y early style with exhaust pot, $2700 obo; Fairbanks Morse 25 hp YHB late style with exhaust pot, $2700 obo; Jose Carrillo nnn-nnn-nnnn (Rosemead CA)

Fairbanks Morse 3 hp Z, made in Canada. Sn23437, not running. Stored inside for 25 years, $300; Rich Hanna nnn-nnn-nnnn (Hayden ID)

Foos 6 hp on original horsedrawn cart. Has water hopper and rotary ignition. In excellent restored condition. Approx year 1905, $13000 cash; David Traver nnn-nnn-nnnn or xxxx@xxxx.xxx (Placerville CA)

Fuller & Johnson 1-1/2 hp vertical pump jack, in good condition, $500; Les Wallace nnn-nnn-nnnn (Oak Grove OR)

Ideal air-cooled engine, $500; Les Wallace nnn-nnn-nnnn (Oak Grove OR)

John Deere 1-1/2 E with brass tag on reproduction JD cart, $850; Rich Hanna nnn-nnn-nnnn (Hayden ID)

John Deere LUC engines (2), each $150; Fred Alexis nnn-nnn-nnnn or xxxx@xxxx.xxx (La Grande OR)

John Deere LUC power unit, 2 cylinder, 12 hp. Good condition Very good metal, pulley and clutch From John Deere 12A pull-type combine. Last ran 1995. Exhaust pipe broken off, $400; Rich Hanna nnn-nnn-nnnn (Hayden ID)

LeRoi 8 hp MH3 two cylinder upright on steel wheeled cart. Used to run buzz saw. Stored inside for 25 plus years. Not stuck, $300; Rich Hanna nnn-nnn-nnnn (Hayden ID)

Monitor 8 Horse Model HJ, 1918, on cart w/5" Goulds pump and trailer, $3800; Jose Carrillo nnn-nnn-nnnn (Rosemead CA)

New Way 2-1/2 hp (?) No tag, horizontal jewel, 4-1/2” bore, project engine, $175; Rich Hanna nnn-nnn-nnnn (Hayden ID)

New Way 2-1/2 hp vertical, sn 1956. Good shape, needs restored. Have new fan shroud in box, $900; Les Wallace nnn-nnn-nnnn (Oak Grove OR)

Novo 2 or 2-1/2 hp. No tag. Runs with external gas tanks, adapted carb, car points, coil & battery, $450; Rich Hanna nnn-nnn-nnnn (Hayden ID)

Peerless 2 hp vertical. (Bates and Edmunds) on iron-wheeled wagon. Runner; Ron nnn-nnn-nnnn or xxxx@xxxx.xxx (Auburn CA)

Reid 12 hp in unrestored running condition. Hot tube and spark plug ignition. Approx year 1900, $3200 cash; David Traver nnn-nnn-nnnn or xxxx@xxxx.xxx (Placerville CA)

Ruston Hornsby 17 hp side shaft diesel engine mounted on trailer. Has diesel engine and compressor for starting. Trailer mounted ready to pull at highway speeds and ready for show, emailed photos available, $7500; Buster nnn-nnn-nnnn (Yuma AZ)

Sattley 1-1/2 hp, sold by Montgomery Wards & Co, sn75030. Older restoration, $450; Mark Foster nnn-nnn-nnnn or xxxx@xxxx.xxx (Mt Shasta CA)

Stover 1-1/2 hp K gov. detent rocker with speed control (recast). Brass castings ready to machine with spec's and steel to make handle etc, $95 (USD) Can send photos; Nathan Kehler nnn-nnn-nnnn or xxxx@xxxx.xxx (Newgate BC)

Waterloo reproduction speed control handles with high crown bolt, cast jam nut and spring ready to install. Aluminum, $73. Brass, $83. Also an aluminum set ready to machine (complete), $45. All prices in USD. Can send photos; Nathan Kehler nnn-nnn-nnnn or xxxx@xxxx.xxx (Newgate BC)

Waukesha ECU 31 / 4x4, G-20759 1750LD, clutch and pulley, $600 or good offer; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Western 40 hp throttle governed, $3200 obo; Jose Carrillo nnn-nnn-nnnn (Rosemead CA)

Wisconsin V4, ran when it was put in storage, $350 or good offer; Wisconsin V4, stuck. Electric start, $100 or good offer; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Witte 4 hp headless, 1915 with brass tag, on skids, complete, not running, $600; Rich Hanna nnn-nnn-nnnn (Hayden ID)