Allis Chalmers B with plow made in 1941, older restore looks good and runs good, $1900; Dell nnn-nnn-nnnn (Buhl ID)
Allis Chalmers B, 1939 with 2 spare front wheels for it. One front tire is new. Has factory hydraulics, $600; Matt Little nnn-nnn-nnnn or xxxx@xxxx.xxx (Harrison ID)
Allis Chalmers B, 1940, sn47590. Engine overhauled in 1995, has not run since. Stored inside for 25 years. Good sheet metal, fair tires. Photos available, $500; Rich Hanna nnn-nnn-nnnn (Hayden ID)
Allis Chalmers B, 1940. Refurbished, repainted, new tires, new seat, new steering wheel, new brake bands, runs like a top. 17th tractor to come off the line with HARDY radiator shutters that work! Has a couple of SMALL issues that a new owner may or may not decide to deal with. This tractor is NICE, and I want it to go to a collector home if possible. No PTO wheel or shaft installed, Drag Machine, $3000; Lance Brazell nnn-nnn-nnnn or xxxx@xxxx.xxx (Sebastopol CA)
Allis Chalmers C with mid-mount sickle mower. New Firestone rear tires. Tractor and mower are all there. Tin and all parts in good condition. I ran and showed it about 10 years ago. Ran and looked good. Had it running last about 5 years ago. Been sitting in the yard since. Ready to be restored and shown again, $900 obo; Chris Anderson nnn-nnn-nnnn or xxxx@xxxx.xxx (Renton WA)
Allis Chalmers M crawler, wide gauge, 20' pads, pto, runs good, looks good. Has blade but not hooked up. Four extra model M sprockets, extra gas tank, two carburetor kits, all in good shape, $1850; Gary White nnn-nnn-nnnn (Yamhill OR)
Case 25-45 model T cross motor, 1929. These are beautiful old work horses with lots of grunt. This tractor came from the factory with the internal oiling system upgrade with no external lubricator. It is an older restoration that runs and drives well. Ready to show as is or tidy it up with a cosmetic restoration. Currently on rubber bolted to the steel, but I have the original bands and grousers. Don't miss your chance to get into one of these big cross motors as they don't come up for sale all that often, $25000 obo CAD or possible trade; Jon Nessel nnn-nnn-nnnn or xxxx@xxxx.xxx (Chilliwack BC)
Case 480B Diesel tractor with full hydraulic loader, has three point hitch, very good rubber, engine had a noise in it so previous owner shut it down and sat for 5 years, selling as is, very nice Industrial loader tractor needing some engine work, $2800; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
Case C parting out; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Case C, S or R F&H hc245 rear round spoke wheels, 9x24, very nice and rare, $300; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Case DC, all metal in good shape, $800; Warren Harger nnn-nnn-nnnn (Central Point OR)
Case DC-4 with heart shaped front end. Hand clutch live pto, hyd and eagle hitch. Runs, need some tinkering, $800; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Case DO, motor was running when parked, good parts or restore, $450; Warren Harger nnn-nnn-nnnn (Central Point OR)
Case LA, 1947. All matching tires are good condition. Serial tag attached and very readable. Owner’s manual. Sheet metal in excellent condition. Hitch made for tractor pulls, pulled only once. Original radiator cap, original crank, all original, never modified. Very collectible, $2495; Larry nnn-nnn-nnnn (Boring OR)
Case S complete front axle assembly, wheels, drag line, wish bone, tie rod, $200; Buck nnn-nnn-nnnn (Greenville IL)
Case SO, 1951 orchard tractor. Fully restored 2-1/2 years ago, show ready. New front tires, like-new Firestone rear tires. 540 PTO, no hydraulics. Engine rebuilt, new paint and decals. Does not have orchard tin work skirting, $4000 obo; Dick Benson nnn-nnn-nnnn (Grants Pass OR)
Case VAC, 1950. Fully restored. Rebuilt engine. New brakes, battery, gauges, new paint and decals. Like new rear Firestone tires with large rear weights. Factory Eagle hitch 3-pt, 540 PTO. Rare single front tire. Runs and drives great, parade ready, $3250; Dick Benson nnn-nnn-nnnn (Grants Pass OR)
Case VAO, 1949, restored, runs well, exc tires,12 v, new bat, Stockton 3 point, $975; Frank nnn-nnn-nnnn (Manning OR)
Case wide tread tractor, 1936, has two set of wheels. One set on rubber and one on steel, $5100 obo; Dave Gallant nnn-nnn-nnnn (Boring OR)
Caterpillar 10 crawler, ran about a year ago, very good undercarriage, no side curtains, someone put a blade on it over the years but this machine is in very good shape overall, $2400; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
Caterpillar 10, 1929, restored, sharp, $4995; Bob nnn-nnn-nnnn (Rhododendron OR)
Caterpillar 10, 1930, driver, $2750; Bob nnn-nnn-nnnn (Rhododendron OR)
Caterpillar 10, 1930, missing parts, not stuck, $1250; Bob nnn-nnn-nnnn (Rhododendron OR)
Caterpillar 22 parts: top mount seat, $500 obo. Cat 22 PTO, $500; Jose Carrillo nnn-nnn-nnnn or xxxx@xxxx.xxx (Rosemead CA)
Caterpillar 22 with Bee Gee hydraulic system. Not running; valves were leaking when parked, $1200 obo. Will email photos; Fred Alexis nnn-nnn-nnnn or xxxx@xxxx.xxx (La Grande OR)
Caterpillar 22, orchard style, not running, $1000 obo; Jose Carrillo nnn-nnn-nnnn or xxxx@xxxx.xxx (Rosemead CA)
Caterpillar 30 like-new crank, $250; radiator support, $200; Buck nnn-nnn-nnnn (Greenville IL)
Caterpillar D-2 5J series wide gauge tractor. Tractor runs good, has a hydraulic bulldozer blade on it, brand unknown. Undercarriage fair, $2500; Mr. Kim Kestler nnn-nnn-nnnn (Reno NV)
Caterpillar D-4 6U-626 angle blade complete cat, needs work, come look, make offer, $1475 obo; Don Chappell nnn-nnn-nnnn (St Helens OR)
Caterpillar D-7 3-T series, 1948 model year, tractor runs great. Has an electric start pony that runs well. Tractor has hydraulic assist steering and forward/reverse lever. Undercarriage is good, grousers are a little low. Has a small oil leak on one final drive and radiator needs a few small leaks fixed. Tractor is bare with no attachments or accessories, $4000; Mr. Kim Kestler nnn-nnn-nnnn (Reno NV)
Caterpillar small 15, 7-C, 1932. Barn fresh, driver, $7995; Bob nnn-nnn-nnnn (Rhododendron OR)
Cockshutt 30, 1948, wide front end, underdrive; Matt Little nnn-nnn-nnnn or xxxx@xxxx.xxx (Harrison ID)
Co-op E-2, 1953. Has rockshaft and 3 pt hitch with drawbar. An older restoration. Runs great, $2500; Dan nnn-nnn-nnnn (Columbia Falls MT)
Cylinder head for International 6 cylinder 236 cubic inch diesel engine from 460 Farmall, $200 or good offer; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
Earthmaster C, 1948, N-62 Continental engine. Good front & rear tires 80%. Engine overhauled & hydraulics work good. New carb, new gear oil, restored to very nice show tractor. Stored inside, runs good, price reduced to $2250 obo; M. Beld nnn-nnn-nnnn (Lynden WA)
Empire, 1948, a true orphan tractor, these tractors were built after WWII using Willys jeep drivetrains. The engine in this tractor is not original, but is a professionally rebuilt counterbalanced flathead 4 Jeep engine. All electrical has been converted to 12v (including the starter). This would make a great tractor drive tractor as it easily does 20 mph before the tire balance comes into play. Possible delivery. $3300 obo; George Best nnn-nnn-nnnn or xxxx@xxxx.xxx (Beaverton OR)
Farmall 130, #FCM 139708 & Ferguson TO-30, #SJ1266532 ? Both pretty complete, sheet metal mostly good, engines not stuck, last ran several years ago, decent rubber. Very restorable or for parts. Farmall $950 obo. TO-30 $850 obo or bundle best offer. Can email photos, you pickup; Miguel nnn-nnn-nnnn (Hollister CA)
Farmall AV, barn fresh high crop, good sheet metal and 36 inch tires, engine loose, $995, ready for restoration. Email for photos or see at www.vintagetractors.com; John Boehm nnn-nnn-nnnn or email (preferred) xxxx@xxxx.xxx (Woodland CA)
Farmall C gas tank, will trade for equal quality Farmall B tank; Wendell Newman nnn-nnn-nnnn (Carson City NV)
Farmall C, barn fresh, very complete with good sheet metal and 36 inch rear tires, ready for restoration, $900. Email for photos or see at www.vintagetractors.com; John Boehm nnn-nnn-nnnn or email (preferred) xxxx@xxxx.xxx (Woodland CA)
Farmall Cub Loboy, 1948, with mounted International 1000 loader, has new rear tires, front tires are excellent, weights in hand, rebuilt quick-tatch hitch primed and mounted, one bottom plow, homemade 3pt attachment, belt pulley gear box attachment for belt work, new bench style seat, rebuilt mag, new headlights, paint is good, no rust, loader in excellent shape, protective white paint, everything works, bucket in excellent shape also, no dents or bends, 3 chain hooks on back side and hole on front edge of bucket for pin or hitch ball, have all manuals for both pieces, tractor runs well, $4000; Bob Folk nnn-nnn-nnnn or nnn-nnn-nnnn or xxxx@xxxx.xxx [box]
Farmall Cub parts: Engine head, rear wheels and rims, front wheel, gas tank and partial hood, radiator and parts, steering shaft and support post, front axle, transmission to engine housing tunnel, rear fenders, gear box for belt pulley. Contact me for prices; Wendell Newman nnn-nnn-nnnn (Carson City NV)
Farmall Cub parts: Four 6 volt flat back lights, good condition, needs rebuilt, $5 each; new rear mount step, $25; new undercarriage mount bar, for blade?, $30; Cub Loboy standard seat mount, $25, or all for $75; Bob Folk nnn-nnn-nnnn or nnn-nnn-nnnn or xxxx@xxxx.xxx [box]
Farmall Cub, 1947, good condition barn fresh tractor. 6 volt, runs good. Includes blade. Tires fair to good. Call for more photos, $1800 obo; Joe Olsen nnn-nnn-nnnn (Paradise CA) [see 2 photos]
Farmall Cub, 1947, with cultivator. Tractor is in original, unrestored condition. Missing only the front grille. Good tires. Sitting right where I parked her last time she was used about 7 years ago. Cultivator has front and rear lifts, shovels. A great tractor to get running again and leave in her work clothes or restore, $1000 obo; Chris Anderson nnn-nnn-nnnn or xxxx@xxxx.xxx (Renton WA)
Farmall Cub, excellent motor, new rear tires and tubes, excellent sheet metal, WRONG COLOR!! Has lights, comes with an original Henderson manufacturing company hydraulic loader with manure bucket in like-new condition. This is a very nice unrestored cub, $3250 obo; Don Chappell nnn-nnn-nnnn (St Helens OR)
Farmall F14, sn FS 45424. Single front wheel. Tires are shot. Tractor is complete except for hood, $300. Also the mowing machine for Farmall F 14. 7-foot bar. Complete except for wood arm, $100. PTO unit that bolts to the back of tractor. Or take all for $300; Wilbur Reil nnn-nnn-nnnn (Davis CA)
Farmall F20, 1936, narrow tread, rebuilt head, rebuilt carb. Runs good, tires hold air, $2500; Bob Jaqueth nnn-nnn-nnnn (Careywood ID)
Farmall H rear skeleton steel wheels with lugs in good shape, $300; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Farmall M, tall tractor, gas, has gear type drop boxes and 20” single front. Aftermarket wide front will also be available. Engine now running, stored inside, good sheet metal and usable tires. Make a good parade tractor, $1200; John LaBoyteaux nnn-nnn-nnnn (Redcrest CA)
Farmall MD, runs well, good rubber, has live hydraulics, belt pulley and Behlen power steering. Sheet metal is good, $2750; John LaBoyteaux nnn-nnn-nnnn (Redcrest CA)
Farmall sheet metal from A to 450 plus misc parts; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Farmall Super C, 1954, Fast Hitch, front loader, 2 pt to 3 pt Danuser blade, wide front with rear weights, rear chains, very good tires, new paint. Runs excellent, $2650; call cell nnn-nnn-nnnn (Elko NV)
Farmall Super C, 1954, narrow front, with C-20 fast hitch plow, one-bottom fast hitch plow, 3 sets rear weights, 1 set front weights. Excellent Goodyear tires, IH wind breaker, IH umbrella, Fast-Hitch drawbar, rear pulley attachment. Very nice paint and seat, $2850; cell nnn-nnn-nnnn (Elko NV)
Farmall Super C. Good original condition with strong engine and good sheet metal. Includes both single narrow and wide front axle. Tractor has aftermarket cultivator frames front and rear, $2000; John LaBoyteaux nnn-nnn-nnnn (Redcrest CA)
Farmall Super M, motor stuck, missing head, great project, $400; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Ferguson TO-30 short block, looks good, no cracks that I can see, $150. Cylinder head, $100. Radiator with shroud, no leaks or repairs, $100; Larry Schwarz nnn-nnn-nnnn (Centralia WA)
Ford 2N, 1943, good sheet metal and tires, 6-volt, pics on request, $2800 obo; Wayne Sealock nnn-nnn-nnnn (Yakima WA)
Ford 2N, 1946, with Sherman od, has one new front tire, $750; Matt Little nnn-nnn-nnnn or xxxx@xxxx.xxx (Harrison ID)
Ford 800 5-spd transmission in good shape, $450. Ford 800 4-spd transmission in good condition, $400; Lou Montero nnn-nnn-nnnn (Jackson CA)
Ford 800 tractor, call for information; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
Ford 841 Powermaster, 1959, engine stuck, very good sheet metal, trans 12 speed forward, 3 speed reverse, hydraulics, 3pt, $950; Keith Smith nnn-nnn-nnnn (Rio Oso CA)
Ford 8N, 1950, good sheet metal, older restoration, 12-volt, pics on request, $2950 obo; Wayne Sealock nnn-nnn-nnnn (Yakima WA)
Ford 8N, 9N & NAA parts. 8N rear end complete. 9N rear end complete. NAA transmission. 8N, 9N & NAA hoods. Misc parts; Earl nnn-nnn-nnnn (San Jacinto CA)
Ford 8N, Sherman trans. Nice straight tractor, new tires, emailed photos available, $2800; Buster nnn-nnn-nnnn (Yuma AZ)
Ford 900 series, 1955, gas, power steering, dual hydraulics, 3 bottom plow, single front wheel, hi-crop, runs good, looks good, plowed with it this spring, $3500; Luther nnn-nnn-nnnn (Battle Ground WA)
Ford 9N, 1941. Good tractor but needs an exhaust valve. Runs. $700 with box scraper, $500 without box scraper; Joe nnn-nnn-nnnn (Railroad Flat CA)
Fordson collection:I have around 9 Fordson tractors, none of which run and some that are parts tractors. Includes one Fordson converted to a road roller with cement-filled rear wheels, two with the Hamilton aftermarket transmissions, some are on steel wheels and some on cut down rims, aftermarket drawbars, aftermarket rear brakes for Fordson, lots of extra parts. A 1919 engine block which has been bored and with line bored bearings. Make offers; George Best nnn-nnn-nnnn or xxxx@xxxx.xxx (Beaverton OR)
Fordson gear driven bracket for high-tension magneto with built-in governor. Type MG24, $200; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
Fordson TRACKFORD crawler, 1923. One of two known to exist. Totally restored and runs great. A big hit at tractor shows. Motor, transmission, clutch, rear end all redone. Nice paint; Mike nnn-nnn-nnnn (Moore MT)
International 350 Hi-Utility fast hitch, 1 remote runs needs ta work, $1000; Mark Parker nnn-nnn-nnnn (Lebanon OR)
International 460 utility tractor with 282 cu/in diesel engine, $1700 or good offer; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
International -6 late model, parts only. Engine (stuck) through final drive sprockets only. Said to have rolled off trailer before the idiot started cutting it up. Saved what I could, $1000 obo; John LaBoyteaux nnn-nnn-nnnn (Redcrest CA)
International T-6 angle blade gasoline only, needs work. Complete dozer, come look, make offer, $1475 obo; Don Chappell nnn-nnn-nnnn (St Helens OR)
International T-6, engine stuck, good undercarriage, $200; Ed Stewart nnn-nnn-nnnn (Visalia CA)
International TD-6 Straight blade diesel complete cat, needs work. Has not run for 5 yrs? Come look, make offer, $1475 obo; Don Chappell nnn-nnn-nnnn (St Helens OR)
International TD-9 tractor & disc, $3500; Sandra Kerr nnn-nnn-nnnn (Newark CA)
John Deere 30" cast centers for rack and pinion axles, fits 50 to 730 and newer, part # F1590R, $50 each; Mark Parker nnn-nnn-nnnn (Lebanon OR)
John Deere 40U with 3pt. runs good , older restoration, $3500. Call or text Jim nnn-nnn-nnnn (Ducor CA)
John Deere 420 (5 roller) parts; Hans Strauss nnn-nnn-nnnn (Stevenson WA)
John Deere 420C loader, 5 roller, no carb, track pads poor, $1500 obo; Dave Wattenbarger nnn-nnn-nnnn (Naples ID)
John Deere 420U, 1957, sn 106102, restored, wide front, 4 speed, PTO, runs and drives well, new tires on front, 80-90% rear, rear wheel weights, new brakes, 3pt with correct 3rd link, 4 year old paint job with Jorde decals, Lindstrom Sunbrella custom cover, both manuals and all paperwork, with restored 415-A 3pt integral 2-14 bottom plow, new Tyler Bucheit points, extension and trash boards, bottoms are soft painted when not in use, nice original set up, $5200 firm; Bob Folk nnn-nnn-nnnn or nnn-nnn-nnnn or xxxx@xxxx.xxx [box]
John Deere 440 crawler, loader, backhoe. Engine & transmission run good, steering clutches need work. Miscellaneous parts included, $4000; Randy nnn-nnn-nnnn or nnn-nnn-nnnn (Butte MT)
John Deere 50, lots of parts square wide front, power steering, fair sheet metal, 12.4-38s 80% L/S bar; Mark Parker nnn-nnn-nnnn (Lebanon OR)
John Deere 520, older restoration with John Deere hay loader and 3 pt. Runs great, paint and show it or just work it, $5000. Call or text Jim at nnn-nnn-nnnn (Ducor CA)
John Deere 530, wide front end, runs and looks good, $2600 or good offer; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
John Deere 60 parted out, lots left: crank, head, grill, hood, plus misc. parts, call with needs; Mark Parker nnn-nnn-nnnn (Lebanon OR)
John Deere 60, 1953. New tires, paint, standard, low seat, runs, $7000; A. Knutson nnn-nnn-nnnn (Bow WA)
John Deere 60, narrow front tires with roll-o-matic. Also has 42" rear tires, $1700 or good offer; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
John Deere 620 LP Black Dash runs on 42" rubber with 16" single front with 3 pt no toplink Airstack new battery box, cables and seat cushions, or John Deere 720 Gas Black Dash, turns over on 42"rubber with 16"single front with 3 pt no toplink Dual Hydraulics Airstack $2750 each or $5000 both; Mark Parker nnn-nnn-nnnn (Lebanon OR)
John Deere 70 Diesel standard, adjustable front end, runs and drived, good sheet metal, air stack, power steering. Tires 50%, pony has a bad rod, $2750; Mark Parker nnn-nnn-nnnn (Lebanon OR)
John Deere 80, 1956. Dual remotes, both motors running good, $10000; A. Knutson nnn-nnn-nnnn (Bow WA)
John Deere A clutch pulley, $250; Buck nnn-nnn-nnnn (Greenville IL)
John Deere A, 1937. New tires, fenders, hood, and shutters. Runs good, $4500; A. Knutson nnn-nnn-nnnn (Bow WA)
John Deere A, 1945, sn 558541, tricycle, styled, restored, rebuilt engine, new gauges, new wiring, electric start, starts and runs good, professionally painted, invested $9000, asking $5000 obo; Bill Littlefield nnn-nnn-nnnn (Eagle Point OR)
John Deere A, 1950, has 6 speed shift quadrant sheet metal has been removed to get tractor ready for paint. Has new muffler and is in running condition. Needs to have brakes rebuilt, $600 obo; Dave nnn-nnn-nnnn (Aurora OR)
John Deere AR unstyled headlights & brackets, $250; Buck nnn-nnn-nnnn (Greenville IL)
John Deere AR, $2000; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
John Deere AR, 1946. Electric start with lighting package. This is a really nice straight original tractor. Engine is loose and will be easy to get running again. Excellent for restoration or get it running and leave it in its work clothes, $2300 CAD obo; Jon Nessel nnn-nnn-nnnn (Chilliwack BC)
John Deere B, 1938 long frame, rebuilt engine spokes on rear, runs good, $2750 obo; Don Chappell nnn-nnn-nnnn (St Helens OR)
John Deere B, 1943, on steel w/rubber tread, restored 2013, hand starts and runs good, $3250 obo; Dave Wattenbarger nnn-nnn-nnnn (Naples ID)
John Deere belt pulley for 40-420-430, $300; Dave nnn-nnn-nnnn (Aurora OR)
John Deere BO Lindeman crawler. Original condition, ready for restoration. The engine has brand new rings & gaskets, and a fresh valve job. It is running and drives, but will need the rod bearings done. Seat and bracket not original, and is missing a few track pads. Other than that, this unit is complete. This is a cheap way to get into a Lindeman crawler, $4000 CAD obo; Jon Nessel nnn-nnn-nnnn (Chilliwack BC)
John Deere BR, 1936, on steel. Brass tag, runs good, $5995; Bob nnn-nnn-nnnn (Rhododendron OR)
John Deere BR, 1937, excellent condition, $6000 obo; Lew nnn-nnn-nnnn (Brush Prairie WA)
John Deere BR, 1944. Hand start, good tires, new fenders, runs good, $2700; A. Knutson nnn-nnn-nnnn (Bow WA)
John Deere BW, 1943, runs good, spoke front wheels; Richard Duval nnn-nnn-nnnn or rdduval40 @gmalil.com (Anderson CA)
John Deere crawler: selling all crawler parts, books, John Deere tools. Call for needs, first come gets the better parts; Ralph Newman nnn-nnn-nnnn (Wolf Creek OR)
John Deere D, 1928, complete on original steel. Used for belt work. Steel is excellent. Engine stuck,$1000; Ed Stewart nnn-nnn-nnnn (Visalia CA)
John Deere D, 1929, complete on cutoffs, stuck, $500; Ed Stewart nnn-nnn-nnnn (Visalia CA)
John Deere D, 1934, rear rubber, front steel. Stuck parts tractor, $350; Ed Stewart nnn-nnn-nnnn (Visalia CA)
John Deere D, 1935, engine free, tires fair, hood good, has not been started in years, $1900; KeithSmith nnn-nnn-nnnn (Rio Oso CA)
John Deere D, 1945, stuck but complete to go to good home, $1475 obo. Come look-make offer; Don Chappell nnn-nnn-nnnn (St Helens OR)
John Deere Early A and AR magneto Fairbanks Morse DRV2A, rebuilt in great condition, $400; Mark Parker nnn-nnn-nnnn (Lebanon OR)
John Deere fender, left rear for 7420 or 7520, may fit others, in very good shape. Newer series fender fits 6615-6130, 6125-6330, 7430-7530, 7130-7230, $220; Carol Gay nnn-nnn-nnnn (Keno OR)
John Deere front weights New Gen. front brackets (4) #R27642R) $50 ea. Front weights s#R27643R (6) $75 ea or $600 for all; Dave Wattenbarger nnn-nnn-nnnn (Naples ID)
John Deere G, 1947, farm fresh ROM front, tires 80% rear, 50% front, pto starts and runs good, $3750 obo; Dave Wattenbarger nnn-nnn-nnnn (Naples ID)
John Deere G, nice straight tractor runs good, emailed photos available, $4000; Buster nnn-nnn-nnnn (Yuma AZ)
John Deere GP orchard, 1931, sn 15027. Restored 2005. Runs and operates great, $12500; Mark Walton nnn-nnn-nnnn or xxxx@xxxx.xxx (Creswell OR)
John Deere H, 1940. Restored, new tires, engine rebuilt, runs, $5000; A. Knutson nnn-nnn-nnnn (Bow WA)
John Deere L, 1940 w/Hercules engine, needs decals. One new rear tire, other three good. Engine check good. Have part of plow, $4300; Jim Matson nnn-nnn-nnnn (Columbia Falls MT)
John Deere L, runs great, good sheet metal, 22 inch wheels and tires, has added live hydraulics and three point hitch, wheel weights, and other unique features, reduced to $2995. Email for photos or see atwww.vintagetractors.com; John Boehm nnn-nnn-nnnn or (email preferred) xxxx@xxxx.xxx (Woodland CA)
John Deere LA, 1941, nice shape. Hand start, $2000; Hans Strauss nnn-nnn-nnnn (Stevenson WA)
John Deere Lindeman BO crawler, 1943, overhauled engine, $6500. Call for details and photos; Mervyn nnn-nnn-nnnn or cell nnn-nnn-nnnn (Coeur d'Alene ID)
John Deere Lindeman crawler, 1947, wide pads, $5995; Bob nnn-nnn-nnnn (Rhododendron OR)
John Deere Lindeman parts. Complete blade with factory pump, $750. Hundreds of miscellaneous parts, some new old stock; Bob nnn-nnn-nnnn (Rhododendron OR)
John Deere M, 1951, runs good, new hd pan & misc gaskets, new front tires and good rear, fresh paint & decals. Unrestored front blade good condition, $3800; Jim Matson nnn-nnn-nnnn (Columbia Falls MT)