July 2017 - Engines & Parts For Sale

All Classified Ads

Bettendorf trucks made in Bettendorf Iowa. Suitable for 5 hp engines and larger. Drop center in very good condition, $500. No shipping, must pickup in Cottonwood, AZ; Gene DeCamp nnn-nnn-nnnn (Cottonwood AZ)

California engine: Commercial 60 hp tank cooled engine made in Los Angeles, CA. in 1915. Only known 60 hp type C engine. Runs well on propane. Easy to start with air. I have started it in the past throwing it back against compression. This 8 ton engine is mounted on a 3 axle dedicated gooseneck trailer (CA license). Trailer has an electric start gas compressor for starting. A 6 inch United Pump made in Oakland, CA. is belted to the engine and can pump water for shows. The engine has not been painted. Has been shown at several shows. Complete unit is $18000. Will sell the engine separate for $13000; Wilbur Reil nnn-nnn-nnnn (Davis CA)

Economy 7 hp, 1922, on drop center cart with steel wheels. Excellent condition, $3700 cash. Picture available on Craig's list/Colorado Western Slope; Keith Kinnett nnn-nnn-nnnn or xxxx@xxxx.xxx (Delta CO)

Fairbanks 6 hp and Fairbanks 3 hp engines, $400 each or good offer; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Fairbanks Morse 20 hp Z tank cooled engine built in 1920 on iron wheel cart. Completely restored and painted. Running. Has been shown at several shows. Few of the 20 hp are still around, $8000; Wilbur Reil nnn-nnn-nnnn (Davis CA)

Fairbanks Morse 25 hp YHB diesel engine. 10.5" Bore X 13" stroke, rated 25 hp at 325 rpm, manufactured 1929. Engine weight 7600 pounds, stands 63" tall, and has 60” x 7" flywheels. Comes mounted on its own street-legal tandem wheel trailer, electric brakes all 4 wheels. I have run it at various local shows for 10 years, $3000; Karl Righetti nnn-nnn-nnnn or xxxx@xxxx.xxx (Santa Rosa CA)

Fairbanks Morse 3 hp Z engine with mag. Some work done, turns free, $275; Dave nnn-nnn-nnnn (Aurora OR)

Fairbanks Morse 40 hp N, 1915, flywheel non-governed side 70-1/2" diameter, 5 inch face, 8 spoke, $3500; Jose nnn-nnn-nnnn (Rosemead CA)

Galloway: rare 8 hp 1916 Galloway. Recent valve job, new rings, new connecting rod babbitt, and rebuilt tri-polar Webster magneto. Includes the original cart, starting engine, and all steel buzz saw (not Galloway) or can be sold separately, $2500. Please call for photos; Larry Denicke nnn-nnn-nnnn (Patagonia AZ)

Ideal air-cooled engine, $500; Les Wallace nnn-nnn-nnnn (Oak Grove OR)

International 2 hp vertical, 1904, very early sn K-2651. Very good shape, no welds. Name plate reads “IHC Vertical Patents Pending”, $1800; Les Wallace nnn-nnn-nnnn (Oak Grove OR)

John Deere 3 hp hit and miss, very complete and original. Motor barely stuck. Most of original paint. Always inside, $700. Can deliver for agreed price; Dan nnn-nnn-nnnn or nnn-nnn-nnnn (Lander WY)

John Deere W power plant, runs good, price reduced to $3995; Bob nnn-nnn-nnnn (Rhododendron OR)

Maytag 2 cylinder model 172, 1939. Complete restoration, modified exhaust, mounted on wagon with air tank with 1946 compressor and whistle. 1946 spare engine and parts included, $175; for details call nnn-nnn-nnnn (Los Altos CA)

Mohawk marine engine with magneto, $325; Crescent marine made in St Louis MO, 1911 only (?), $300; Missouri marine engine, $150; Buck nnn-nnn-nnnn (Greenville IL)

Multiple engines: Fairbanks Morse 6 hp Z on skid. Throttle governed. Good runner and easy starter. Mag, oiler and hand crank included. Just remember, crank kills, $800. Monitor 1-1/4 hp pumping engine. Hit and miss. Complete. Includes: pump jack with pump clamping bracket and in/out gear to shift into neutral; accessory flat belt drive pulley; heavy cast pump disconnect bracket; oiler and ignition box. Mounted on nice homemade 4 wheel cart. Restored, clean, and good runner, $800. Witte 2 hp hit and miss. Real nice, clean, little engine on a skid. Can easily be lifted by 2 guys and set in a pick-up. Hot Wico mag and oiler included. Excellent runner, $600. Stover CT-2. Crank is in good condition but needs a rod bearing. On a skid. Not stuck, $250. All engines except the Stover are runners and I will be happy to text or email photos on request. I will be travelling to Brooks, Oregon Steam-Up in late July. I can met you for delivery; Ed nnn-nnn-nnnn call or text (Reno NV)

New Way 2-1/2 hp vertical, sn 1956. Good shape, needs restored. Have new fan shroud in box, $900; Les Wallace nnn-nnn-nnnn (Oak Grove OR)

Parsell & Weed model engine. Machining done on CNC. Top quality. Engine mounted on Oak base with copper cooling tank and brass plumbing, $2000 plus shipping; Gene DeCamp nnn-nnn-nnnn (Cottonwood AZ)

Red Wing model, air cooled. Sold by PM Research for $3000. Mounted on an Oak base and coupled to an old style water pump. Displayed at 2 shows, excellent condition, $2500 plus shipping; Gene DeCamp nnn-nnn-nnnn (Cottonwood AZ)

Union 7 hp marine engine for sale. Fully restored, San Francisco built side shaft engine with make & break ignition. Vertical side shaft powers igniter, water pump, valves and low tension magneto. This engine was always fresh water cooled and never in salt water. Recently restored with new rings, valve job and bearings. I have only seen one other Union engine of this style so it is rare, and it runs slow and smooth like all Unions. $6000. Email me for photos; Bill Prine nnn-nnn-nnnn or xxxx@xxxx.xxx (Amity OR)

Victor (International Harvester) 20 hp screen cooled engine built in 1912 on iron wheel cart. Has the original sub-base and clutch pulley. Everyone stops to look at this one. This 4 ton + engine has been completely restored and painted. It is running and has been shown at several shows. $12000; Wilbur Reil nnn-nnn-nnnn (Davis CA)

Western 16 hp tank cooled engine mounted on an original wench base. Made in Los Angeles Ca. in 1917. Older restoration. The unit is mounted on a manufactured dedicated 2 axle trailer ( CA license) that has built in jack stands for showing. The engine and wench work. Comes with a frame and a small cable pulley that erects into a 10 ft. tower. There is also an excellent original ore bucket. I have shown it at several shows in the past. A real crowd pleaser. Rubber tires are old but still hold air they would need to be replaced if you are towing it much. $12000; Wilbur Reil nnn-nnn-nnnn (Davis CA)

Witte 2 hp Type B, 1924 throttle governed engine. The engine runs well on the starting gas tank, but it is missing the original gas tank, though it does have the mounting tabs for the tank. The crank guard is also missing. Has a Wico EK magneto; Kip Keeney nnn-nnn-nnnn (Seattle WA)