1949 MTW. Great rubber, new seat, new wheel bearings in front and new brakes; Tim nnn-nnn-nnnn (Clatskanie OR)
Allis Chalmers 20-35, 1926, restored, runs, on steel with road treads, great tractor. I just can't crank it anymore due to shoulder injury. Can text pictures; Tom Treadaway nnn-nnn-nnnn or cell nnn-nnn-nnnn (Pleasant Hill OR)
Allis Chalmers B, 1939, very nice restored parade quality tractor. Starts easily, drives nicely and looks great, $3000; nnn-nnn-nnnn (Oregon House CA)
Allis Chalmers B, good condition, $1500; Ed Bring nnn-nnn-nnnn (Molalla OR)
Allis Chalmers C, narrow front, with Allis Chalmers belly mount sickle mower. I bought it, got it running good and used/showed it a for a number of years then it has sat since. New Firestone rear tires about 10 years ago when I got it. Front tires are in good condition (Tri-rib ag tires.) Fuel tank was anti-rust coated. Not running at this time but engine is free. Nice little Allis for someone to restore. Just needs a new home and some TLC, $1000 obo; Chris Anderson nnn-nnn-nnnn or xxxx@xxxx.xxx (Renton WA)
Allis Chalmers D-14, 1960, parts for sale, starter (also fits D-15 gas), $175; gas tank, cap, gauge, sediment bowl and shutoff, very good, $200; radiator, good, $200; radiator shroud, $150; half hood, exhaust side, $95; Iver nnn-nnn-nnnn (Vancouver WA)
Allis Chalmers G with hydraulics, new tires, runs good, call for price; Jerry Fischer nnn-nnn-nnnn (Gaston OR)
Allis Chalmers WC, 1940, wide front end, wheel weights, looks good, runs good, recent paint, $800; phone calls only nnn-nnn-nnnn (Goldendale WA)
Allis Chalmers, 1950, WD45 engine, AC front loader, extra-large bucket, hydraulics work, very good tires, wide front end, extra hood, new battery; Duane Nelson nnn-nnn-nnnn (Carson City NV)
Buda engine: 6BD230 diesel, for Cockshutt 40 or Allis Chalmers WD45 diesel. Has cracked cyl. [wet] sleeve and stuck. Cyls. sleeves show very little wear. I would provide a replacement sleeve from gas engine, should be the same. Good head. I'm asking $400; Francis Garceau nnn-nnn-nnnn (Jefferson OR)
Case 210B, 1959, 4 cylinder gas. Has power steering. Engine runs good, has factory loader, 8 speed with forward & reverse shuttle, PTO. Have 3 pt parts not installed. New air filter with paper element. Recorded radiator, new water pumps, sheet metal blasted & epoxy primed except fenders. Front tiers 5.50x16 near new, rear tires 14.9x24 (Rice tread 2" deep). Extra factory rear wheels & tires not good condition. Extra front axle with steering cylinder, $2500; Ron Stoner nnn-nnn-nnnn (Scotts Mills OR)
Case C, parting out; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Case C, S or R F&H hc245 rear round spoke wheels, 9x24, very nice and rare, $300; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Case DC transmission housing with heavy duty extended axles; David or Erlin Santoro nnn-nnn-nnnn (Hillsboro OR)
Case DC-4 with heart shaped front end. Hand clutch, live pto, hyd and eagle hitch. Runs, needs some tinkering, $800; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Case S parts: complete axle, wheels, drag link, tie rod, $200; Buck Evans nnn-nnn-nnnn (Greenville IL)
Case S, 1943, very nice restorable tractor, this is a war time tractor on rear cut offs. Rear tires no good, fronts ok. Engine turns over. Good sheet metal. Call for more information and pictures, $600 obo; Steve Zane nnn-nnn-nnnn (Paynes Creek CA)
Case SC tractor rims, have two, size 11-12x38, $100 for both; Ed Bring nnn-nnn-nnnn (Molalla OR)
Case SC, needs tune up, ran last fall, $750; Ed Bring nnn-nnn-nnnn (Molalla OR)
Case VA parts: I have several parts tractors, call with needs; Steve Zane nnn-nnn-nnnn (Paynes Creek CA)
Case VAC, 1948, lots of updates, wide front end, eagle hitch, new big sleeves and pistons, oversized to 140 CI. ,12V, dry air cleaner, and more. Good running, usable tractor. Painted and decals, $1500; Steve nnn-nnn-nnnn (Medical Lake WA)
Case VAH, 1948. This is a good restorable high crop, very nice sheet metal, engine turns over. Call for more information and pictures, $2200 obo; Steve Zane nnn-nnn-nnnn (Paynes Creek CA)
Case VAI, bad engine, lots of good parts or restore. Call for more information and pictures, $300; Steve Zane nnn-nnn-nnnn (Paynes Creek CA)
Case VAO, 1947, with full orchard shielding. Fully restored in 2010 and was the featured tractor in the January/February 2012 Antique Power Magazine. Good runner, good rubber. I've never seen a prettier one, price reduced to $6000; Maloy Murdock nnn-nnn-nnnn or xxxx@xxxx.xxx (Merlin OR)
Case VAO, 1951, runs, good tin and rear tires, restore or use as parts tractor, $500; Ray Gossett nnn-nnn-nnnn (Hermiston OR)
Case wide tread tractor, 1936, has two set of wheels. One set on rubber and one on steel, $5200 obo; Dave Gallant nnn-nnn-nnnn (Boring OR)
Caterpillar 10 & 15 gas tanks; Don Chappell nnn-nnn-nnnn (St Helens OR)
Caterpillar 30, 1926, for sale by second owner. Unrestored with original canopy and bill of sale from first owner. Runs on propane, $5000; Richard Watson nnn-nnn-nnnn or xxxx@xxxx.xxx (Gridley CA)
Caterpillar 30, operators manual service manual, copies, 63 pages, $25 prepaid shipping: Ken Gual nnn-nnn-nnnn (Brinnon WA)
Caterpillar 416 backhoe, 9000 hours, antique farm equipment and vehicles. Absolute auction May 5th. Visit our website at Downsauction.com for more details; Whitney Lee nnn-nnn-nnnn (Middleton ID)
Caterpillar D4C and D6C electric start complete pony motor assembly, $600; Buck Evans nnn-nnn-nnnn (Greenville IL)
Caterpillar parts: Ensign carbs for Cat 20, 30 AEL and 60 AAE all rebuilt, $300 each. D2 track adjuster covers, new, $450 pair; D4 engine side panels, $100; nnn-nnn-nnnn or xxxx@xxxx.xxx (Beavercreek OR)
Caterpillar Twenty radiator, $250; Buck Evans nnn-nnn-nnnn (Greenville IL)
Cletrac AD, 1937. Starter worked on, fuel pump, new paint, refurbished, $2200 obo; Bob Arndt nnn-nnn-nnnn (Cromberg CA)
Cletrac AD2, 1936. Refurbished fuel pump, valves ground, starter cleaned. Isaacson hydraulic bulldozer blade, $2700 obo; Bob Arndt nnn-nnn-nnnn (Cromberg CA)
Cletrac HG-42, circa 1948. Runs, with hydraulic blade made by Anderson, undercarriage a little tired, tracks in good condition, $2200, will consider offers; Richard Olson nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
Cockshutt 40, 1951, originally sold as a CO-OP E4. This tractor has the seldom seen [rare] single front wheel option for a Cockshutt tractor. Also has early style hyd. system, and rock shaft, another rare option. Good running Buda 6B230 gas engine, good compression and oil pressure. No engine oil leaks. Good clutch, good gears. Clean rear rims, w/ 13.6 x 38 agri power rears, fair cond. Brakes work, ready to restore or use as is, price reduced to $2400 obo. Also have WAFE 40 for sale; Francis Garceau nnn-nnn-nnnn (Jefferson OR)
Cylinder head for International 6 cylinder 236 cubic inch diesel engine from 460 Farmall; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
Farmall 460 cylinder head, for International 6 cylinder 236 cubic inch diesel engine; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
Farmall 460, runs good, has hydraulic loader and 3 point hitch, $1750; Ed Bring nnn-nnn-nnnn (Molalla OR)
Farmall 504, "69", w/pto and wood saw, $1200; Sandra nnn-nnn-nnnn (Brentwood CA)
Farmall A, restore or parts, good FFA project, $500 obo; Wendell Newman nnn-nnn-nnnn (Carson City NV)
Farmall C tractors: One 4 wheel (not 4X4) and one 3 wheel (tricycle) with bucket; Sandra nnn-nnn-nnnn (Brentwood CA)
Farmall Cub Lowboy (white & yellow) with 3 pt hydraulics, new rubber, call for price; Jerry Fischer nnn-nnn-nnnn (Gaston OR)
Farmall Cub with blade, plow, mower, cultivator, and disc, new rubber, runs good, late model (3 bar grill), call for price; Jerry Fischer nnn-nnn-nnnn (Gaston OR)
Farmall F30 wide tread on steel, complete, decent paint, project or nice yard art, $1350; Larry nnn-nnn-nnnn (Phelan CA)
Farmall F30, 1935, narrow tread on steel, will run, original rust, $2000; Larry nnn-nnn-nnnn (Phelan CA)
Farmall H belt pulley gear box, excellent condition, $65. Front radiator shutters and controls for Farmall H, repainted, excellent condition, $80; Wendell Newman nnn-nnn-nnnn (Carson City NV)
Farmall H Donaldson air cleaner with jar; Al nnn-nnn-nnnn (Elko NV)
Farmall H rear skeleton steel wheels with lugs in good shape, $300; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Farmall M, tall tractor, gas, has gear type drop boxes and 20” single front. Aftermarket wide front will also be available. Engine free but not running, stored inside. Good sheet metal and usable tires. Make a good parade tractor, $1200; John LaBoyteaux nnn-nnn-nnnn (Upper Lake CA)
Farmall MD, runs well, good rubber, has live hydraulics, belt pulley and Behlen power steering. Sheet metal is good. Tractor is dirty. Tractor is located in Redcrest, CA, $2750; John LaBoyteaux nnn-nnn-nnnn (Upper Lake CA)
Farmall parts for Farmall Cub, A, B, C, H and M; Wendell Newman nnn-nnn-nnnn (Carson City NV)
Farmall Regular, 1927, with unrestored cultivator and Kay Brunner wheels. Antique farm equipment and vehicles. Absolute auction May 5th. Visit our website at Downsauction.com for more details; Whitney Lee nnn-nnn-nnnn (Middleton ID)
Farmall sheet metal from A to 450 plus misc parts; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Farmall Super A, includes front, rear wheels but no tires, front, rear axle, oil filter case, hydraulic unit, engine (no head), clutch, transmission. No seat, combination belt pulley/pto shaft, no pulley, steering gear housing, rear cultivator linkage, rockshaft, $300 obo; Tom Winterrowd nnn-nnn-nnnn or xxxx@xxxx.xxx (Canby OR)
Farmall Super AV, 1948, parade condition, excellent rubber, ready to show, $5000; nnn-nnn-nnnn (Oregon House CA)
Farmall Super C, 1951-1954, tricycle, fresh paint, runs strong, good rubber all around, $2750; Stuart Wade nnn-nnn-nnnn (Chico CA)
Farmall Super C. Good original condition with strong engine and good sheet metal. Includes both single narrow and wide front axles. Tractor has aftermarket cultivator frames front and rear, tractor is in Redcrest CA, $2000; John LaBoyteaux nnn-nnn-nnnn (Upper Lake CA)
Farmall Super M motor stuck, missing head, great project, $400; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Farmall/I/H O12, engine is stuck but not cracked, no hood ,fender tops are missing but vertical part is there. Good tires, $450. Also have a 1935 O12 carcass with good block and good tag, $100 ; Larry Daniels nnn-nnn-nnnn (San Bernardino CA)
Farmall/IH W12, 1936, original rust patina, will run with minimal work, good sheet metal, complete, $1900; Larry nnn-nnn-nnnn (Phelan CA)
Ford 4000 HD Industrial, 1964, 4 cyl diesel, runs good, sheet metal good, select-o-speed transmission, power steering, dual loader, $4500; Greg nnn-nnn-nnnn or xxxx@xxxx.xxx (Tekoa WA)
Ford 800 tractor, call for information; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
Ford 850 5 speed, 1956, rebuilt hydraulics ($780), runs well, good oil pressure, tires good, tin good but not excellent, ready to work, $1950; nnn-nnn-nnnn (Oregon House CA)
Ford 8N restored, original rubber, newer paint, lighter, front bumper, sn 177. Very , very nice $3000; Don Chappell nnn-nnn-nnnn (St Helens OR)
Ford 9N & 8N, parting out two tractors with very good sheet metal, engines no good. Call with needs; Steve Zane nnn-nnn-nnnn (Paynes Creek CA)
Ford 9N pair of rear wheels, $300. Smooth rear axles with drums and bearings, $500. Front wheel weights, $150; Dennis McClain nnn-nnn-nnnn (Redwood Valley CA)
Fordson gear driven bracket for high-tension magneto with built-in governor. Type MG24,.$200; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
Frick 12-24, 1918, beautiful, only 4 in existence; Waynesboro, Pennsylvania, 4 owners. Antique equipment and vehicles. Selling in absolute auction May 5th. Visit Downsauction.com for more details; Whitney Lee nnn-nnn-nnnn (Middleton ID)
Harris Power Horse with 4 wheel drive and Chrysler industrial engine, $4500; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
International 1066 Hydro. Runs good. Have 3-point arms and rims for duals. All new batteries, filters, and oil, $5000 FIRM, cash only. Please call and leave a message, I will return your call. I don't text; Aaron nnn-nnn-nnnn (Walnut Grove CA)
International 350 Hi-Utility fast hitch 1 remote runs needs ta work, $1000; Mark Parker nnn-nnn-nnnn (Lebanon OR)
International 460, utility tractor, with 282 cid diesel engine, $1800 obo; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
International C, 1950, runs like a top, front blade, good tires, new battery, ready for paint; Rolly nnn-nnn-nnnn or Greg nnn-nnn-nnnn or xxxx@xxxx.xxx (St. Maries ID)
International Cub Cadet 149 Hydrostatic with Johnson hydraulic skip loader & rear rototiller. Restored, $3500; Nichols nnn-nnn-nnnn (Red Bluff CA)
International Harvester 10-20 Mogul, 1917, restored. Antique farm equipment, and vehicles. Live and online absolute auction. May 5th. Visit Downsauction.com for complete details; Whitney Lee nnn-nnn-nnnn (Middleton ID)
International T6 late model, parts only. Engine (stuck) through final drive sprockets only. Said to have rolled off trailer before the idiot started cutting it up. Saved what I could. Tractor is in Redcrest CA, $1000 obo; John LaBoyteaux nnn-nnn-nnnn (Upper Lake CA)
John Deere 1010, 1962, gas, runs good, sheet metal ok, dash shifter, power steering, dual loader, $3800; Greg nnn-nnn-nnnn or xxxx@xxxx.xxx (Tekoa WA)
John Deere 2010 with front loader, $6000; Pat Ridders nnn-nnn-nnnn (Albany OR)
John Deere 30" cast centers for rack and pinion axles, fits 50 to 730 and newer. Part # F1590R, $50 each; Mark Parker nnn-nnn-nnnn (Lebanon OR)
John Deere 4020 row crop diesel, 1964. Wide front, 2 SCV's, power shift, M&W turbo, 115 hp at the PTO, good rubber on the rear, front rubber needs to be replaced. New wiring harness, rebuilt starter, new batteries, gauges and lights work, pulls a 5 disc flail conditioner mower as fast as you
want to go, power shift works great for baling hay, never have to stop; Tim nnn-nnn-nnnn (Clatskanie OR)
John Deere 420, 1958, gas, excellent, complete machine shop motor overhaul. New clutch to throw-out bearings. New rear tires, power steering rebuilt, new tach cable, new fan belts & generator. Rebuilt 3pt and PTO. Premium paint job to new decals. I have $6750 in it, will sell for $5500; Bud Combe nnn-nnn-nnnn (Grants Pass OR)
John Deere 430 T restored, new tires and runs excellent, call for price; Jerry Fischer nnn-nnn-nnnn (Gaston OR)
John Deere 50 parts or buy completely disassembled: square wide front, power steering, fair sheet metal, 12.4-38s 80% L/S bar, with a few new and rebuilt parts. $1600. Will not sell parts until the 12th of May. Call early to get on parts list; Mark Parker nnn-nnn-nnnn (Lebanon OR)
John Deere 50, roll-o-matic front end, average tires, sheet metal pretty good, has not been started for a couple years, $1000; David nnn-nnn-nnnn (Spokane WA)
John Deere 530, looks good, $4700 obo; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
John Deere 60 parted out, lots left: crank, head, grill, hood, plus misc. parts, call with needs; Mark Parker nnn-nnn-nnnn (Lebanon OR)
John Deere 60N LP, 1956. New front tire, near new rear tires, 2 scv's, 3 pt, 12 volt ignition w/hot coil and great tin. Owners and Parts books come with the tractor; Tim nnn-nnn-nnnn (Clatskanie OR)
John Deere 620 LP Black Dash, runs, on 42" rubber with 16" single front with 3pt no toplink Air stack new battery box, cables and seat cushions, or John Deere 720 Gas Black Dash, turns over on 42"rubber with 16"single front with 3pt no toplink Dual hydraulics air stack, $2750 each or $5000 both; Mark Parker nnn-nnn-nnnn (Lebanon OR)
John Deere 70 Diesel standard, adjustable front end, runs and drive, good sheet metal, air stack, power steering. Tires 50% lots of cracks, pony has a bad rod, $2750 Mark Parker nnn-nnn-nnnn (Lebanon OR)
John Deere 720 diesel, wide front, good tires, $6000; Pat Ridders nnn-nnn-nnnn (Albany OR)
John Deere A NOS clutch pulley, $300; Buck Evans nnn-nnn-nnnn (Greenville IL)
John Deere A on propane. Ran 2 yrs. ago when parked, $800. Photos available. Call or text Jim nnn-nnn-nnnn (Ducor CA)
John Deere A, rebuilt engine, 2nd gear seems to be out, $1200; Chris nnn-nnn-nnnn (Camano Island WA)
John Deere A, styled tricycle, 1945. New rubber, wheel weights 1/0, sandblasted, professional paint job, reconditioned engine, rings, valve job, clutch and pulley assembly, carburetor, generator, starter, radiator, new wiring harness, gauges, new decals and battery, $9000 invested, take $7500 obo; Bill nnn-nnn-nnnn (Shady Cove OR)
John Deere AR, $2500; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
John Deere AR, 1937. Very good running older restoration. New rear tires with cutoff rims front and rear. Good sheet metal, $3250; Tim Morris nnn-nnn-nnnn or xxxx@xxxx.xxx (Napa CA)
John Deere B, 1938. Long frame model, engine rebuilt, good period tires, rear spokes, very good unstyled tractor ready for paint, $3250; Don Chappell nnn-nnn-nnnn (St Helens OR)
John Deere B, 1939, decent tractor, complete but stuck, make offer; Chris nnn-nnn-nnnn (Camano Island WA)
John Deere belt pulley for 40-420-430, $350; Dave nnn-nnn-nnnn (Aurora OR)
John Deere BNH, working clothes tractor, mismatched rear tires, runs well, $4250; Chris nnn-nnn-nnnn (Camano Island WA)
John Deere BO, 1937, runs and drives, front steel with guide bands, rear steel with extension rims and lugs, decent paint, $4250; Chris nnn-nnn-nnnn (Camano Island WA)
John Deere BR, with front and rear steel, running tractor, decent paint, reproduction fenders, $3250; Chris nnn-nnn-nnnn (Camano Island WA)
John Deere crawler: selling all crawler parts, books, John Deere tools. Call for needs, first come gets the better parts; Ralph Newman nnn-nnn-nnnn (Wolf Creek OR)
John Deere D, 1941, styled, sheet metal very straight, paint is good except oxidized, $3500; Warren Harger nnn-nnn-nnnn (Central Point OR)
John Deere D, 1946, styled. Complete but engine stuck, $1675; Don Chappell nnn-nnn-nnnn (St Helens OR)
John Deere early A and AR magneto Fairbanks Morse DRV2A, rebuilt in great condition, $400; Mark Parker nnn-nnn-nnnn (Lebanon OR)
John Deere H with cultivators, runs real well, for sale or trade; JH Keith nnn-nnn-nnnn (Hermiston OR)
John Deere L engine with tractor clutch, (junk), $125; Buck Evans nnn-nnn-nnnn (Greenville IL)
John Deere LA, 1942 sn 5817. Tag is still attached. Runs and drives! Hand crank or electric start. Comes with following attachments: 5' sickle bar mower with an additional 6' bar, 5' spring tooth harrow with additional stainless steel cultivators, and 14" single bottom plow. Also have the original owner's manual and parts manual. The metal is straight with no major rust. Can send pictures on request. Delivery available, $2800; Doran Chapman nnn-nnn-nnnn or xxxx@xxxx.xxx (Donald OR)
John Deere LA, 1946, sn 11152. Presents well enough to have been taken to the County Fair. Clean. Starts easy, idles, throttles up. Good rubber. Overall condition is better than average for antique of age. Sickle bar included if you want it. Various books, receipts, etc. included. Price reduced to $2300 obo; Buck or Gary nnn-nnn-nnnn (Bremerton WA)
John Deere Lindeman crawler, nice condition, $6750; Dave nnn-nnn-nnnn (Aurora OR)
John Deere M parts for sale: nice M hood, steering shaft and pedestal, complete transmission, generator, distributor and carb. Make offer for all or part; Tim Morris nnn-nnn-nnnn (Napa CA)
John Deere M, 1948, runs good with good sheet metal and tires, older restoration, $2600. Email for photos or see at www.vintagetractors.com; John Boehm nnn-nnn-nnnn or (email preferred) xxxx@xxxx.xxx (Woodland CA)
John Deere M, tin good and it runs good. Tires fair, $1700 obo; call or text Jim nnn-nnn-nnnn (Ducor CA)
John Deere MC crawler, low hour, one owner tractor, $3000; Dave nnn-nnn-nnnn (Aurora OR)
John Deere MI, 1951. Very good running tractor with good sheet metal, new tires, clutch and radiator, $2250; Tim Morris nnn-nnn-nnnn (Napa CA)
John Deere MT starter, sn 117064, completely rebuilt, $75; Clark Higley nnn-nnn-nnnn (Kimberly ID)
John Deere MT, tin good, and it runs good. Tires are fair, $2000 obo. Photos available. Call or text Jim nnn-nnn-nnnn (Ducor CA)
John Deere R. Runs, working tractor. I have farmed with it the last two years, new front tires, diamond tread tires on the rear, $4500; Chris nnn-nnn-nnnn (Camano Island WA)
John Deere, D, 1929, on cut offs, new front tires, average rear tires. Older paint job has not been started for a couple years, $2800; David nnn-nnn-nnnn (Spokane WA)
Kubota B6100 and 7100 creeper transmission adapter bolt on $75 parts; nnn-nnn-nnnn or xxxx@xxxx.xxx (Beavercreek OR)
Kubota hood: Near new hood for Kubota B2350 and BX1860, $100 each; nnn-nnn-nnnn or xxxx@xxxx.xxx (Beavercreek OR)
Kubota L245, L295, L2800 and B7100 parts; nnn-nnn-nnnn or xxxx@xxxx.xxx (Beavercreek OR)
Kubota L295 engine rebuilt complete $2750 parts; nnn-nnn-nnnn or xxxx@xxxx.xxx (Beavercreek OR)