March 2017 - Tractors & Parts For Sale

All Classified Ads

Allis Chalmers B with plow made in 1941, older restore looks good and runs good, $2800; Dell nnn-nnn-nnnn (Buhl ID)

Allis Chalmers, 1948, engine overhauled, live hydraulic, PTO, three point hitch, back blade and chains. Has good tires.  Ready for paint. $2500; contact Rolly at nnn-nnn-nnnn  or Greg nnn-nnn-nnnn. (St. Maries ID)

Allis Chalmers gas tractors used OEM parts: Seat, very good condition, $175. Gas tank, VGC, $175. Radiator, good condition, $200. Radiator shroud, $150. Starter, good condition, $150. Half hood, exhaust side, $100; Iver nnn-nnn-nnnn (Vancouver WA)

Allis Chalmers M radiator, excellent core but top and bottom tanks are bad, $150; Frank Velarde nnn-nnn-nnnn (Northridge CA)

Allis Chalmers M, 1934. Restored, hand start, new paint and seat. Parked in Carson City NV, $2400; Frank Velarde nnn-nnn-nnnn (Northridge CA)

Bolens Iseki diesel tractor, 4 wheel drive, 2 cylinder, has front loader and back blade, runs and operates really good, great tires, $3000; Ray Gardner nnn-nnn-nnnn (Bandon OR)

Carburetor for Allis Chalmers G tractor, $100; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Carburetors, 3 old: Rayfield, all brass, Model L2, 1-1/4 venturi, patented 2/20/1911. Kingston, brass carburetor with steel bowl, Model L3, 1-3/16 venturi, patented 3/9/1915. Zenith Model T4X, 1-5/32 venturi, patented 2/29/1908; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Case C, parting out; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Case C, S or R F & H hc245 rear round spoke wheels, 9x24, very nice and rare, $300; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Case DC-4 with heart-shaped front end, hand clutch, live pto, hyd and eagle hitch. Runs, need some tinkering, $800; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Case S tractor with Wehr road grader attachment. Older restoration. Has no spark currently. Otherwise nice condition, $3500 obo. Located in Tangent Oregon. Selling for a friend’s estate; Jake Winn nnn-nnn-nnnn or xxxx@xxxx.xxx (Albany OR)

Case VAH 1948. Very restorable high crop. Case only built 2016 of this model. Very straight sheet metal, engine stuck comes with extra block. Rear tires hold air. Call for more details and pictures. $2200 obo; Steve Zane nnn-nnn-nnnn (Paynes Creek CA)

Case VAO, 1945. Ran good when parked 9 years ago. Has correct fenders, no skirts, 1 rear tire bad, $900; Bruce Heppler nnn-nnn-nnnn (Covelo CA)

Caterpillar 30, 1926, for sale by second owner. Unrestored with original canopy and bill of sale from first owner. Runs on propane, $5000; Richard Watson nnn-nnn-nnnn or xxxx@xxxx.xxx (Gridley CA)

Caterpillar D4C and D6C pony engine, complete, excellent condition, $600; Buck nnn-nnn-nnnn (Greenville IL)

Caterpillar parts: Ensign carbs for Cat 20, 30 AEL and 60 AAE all rebuilt, $300 each. D2 track adjuster covers, new, $450 pair; D4 engine side panels, $100; nnn-nnn-nnnn or xxxx@xxxx.xxx (Beavercreek OR)

Cletrac HG-68, 1951, completely restored. New paint professionally done, full set of lights, new 6 volt battery. 3 point hitch PTO. Excellent runner, $6500; Mac nnn-nnn-nnnn (Clarkston WA)

Cockshutt 30 parts and engines, or complete tractor for parts or to restore. Also some Cockshutt model 40 & 50 parts. Too many to mention, call for price and availability; Francis Garceau nnn-nnn-nnnn (Jefferson OR)

Cylinder head for International 6 cylinder 236 cubic inch diesel engine from 460 Farmall; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Farmall A, 1940, nice tin, like new tires, hand start, comes with 2-way plow and rear sickle mower, draw bar, front & rear wheel weights, runs good, $1600; Jim Sorenson nnn-nnn-nnnn (Mt Vernon WA)

Farmall belt pulleys: Pulleys for H, M, all the way up to 650. Can be delivered to Grants Pass or Medford area as well as Redding CA, $100 each; Roger nnn-nnn-nnnn (changed number) no Saturday calls (Redding CA)

Farmall C, 1949. Very nice original unrestored tractor. Good rubber and sheet metal. Converted to 12 volts, $1500 firm; Tim Morris nnn-nnn-nnnn or xxxx@xxxx.xxx (Napa CA)

Farmall F12 1936 with factory wide front, $1800; Bob Gauntt nnn-nnn-nnnn (Vancouver WA)

Farmall H original air cleaner with jar, original; Al Barkl nnn-nnn-nnnn (Elko NV)

Farmall H rear skeleton steel wheels with lugs in good shape, $300; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Farmall H, started and ran well last summer. Needs a battery. Rebuilt engine, gear train ok, hydraulic perfect. Email me for pictures. Serious inquiries only please, no trades, $2000; Randy Marx nnn-nnn-nnnn or xxxx@xxxx.xxx (Battle Ground WA)

Farmall M, tall tractor, gas, has gear type drop boxes and 20” single front. Aftermarket wide front will also be available. Engine free but not running, stored inside. Good sheet metal and usable tires. Make a good parade tractor, $1200; John LaBoyteaux nnn-nnn-nnnn (Upper Lake CA)

Farmall M. Last ran in 2014. Could use a complete motor rebuild. Good front tires. Serious offers only, no trades, email me for pictures. $500; Randy Marx nnn-nnn-nnnn or xxxx@xxxx.xxx (Battle Ground WA)

Farmall MD, runs well, good rubber, has live hydraulics, belt pulley and Behlen power steering. Sheet metal is good. Tractor is dirty. Tractor is located in Redcrest, CA, $2750; John LaBoyteaux nnn-nnn-nnnn (Upper Lake CA)

Farmall parts: Assorted wheels, A and B fenders, tanks, dash, hood, etc., call for prices; Farmall wheels 355439R1/6325PE with good splines, $100 each; Roger nnn-nnn-nnnn (changed number) no Saturday calls (Redding CA)

Farmall sheet metal from A to 450 plus misc parts; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Farmall Super C parts: Fast Hitch for Farmall Super C, $320. Belt pulley with guard for Farmall Super C, $80; Dan Miller nnn-nnn-nnnn (Rochester WA)

Farmall Super C. Good original condition with strong engine and good sheet metal. Includes both single narrow and wide front axles. Tractor has aftermarket cultivator frames front and rear, tractor is in Redcrest CA, $2000; John LaBoyteaux nnn-nnn-nnnn (Upper Lake CA)

Farmall Super M motor stuck, missing head, great project, $400; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Farmall Trojan Road Grader, built for the U.S. Navy in 1947. Completely sand blasted and repainted. Has been shown at Brooks Steamup, Oregon State Fair and the Ag Expo at the Portland Expo Center. It has the brass U.S. Navy tag, $6500. Located near Wilsonville Oregon; Russ Shorten nnn-nnn-nnnn (Dayton WA)

Ferguson Magneto for high-tension magneto with built-in governor. Type MG24, $200. Also Fordson radiator cap with nob, $50; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Ford 800, call for information; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Ford 8N tractors: have 3. One rebuilt, tires like new, new clutch, new pressure plate, throw out bearings, main & rod bearings, new water pump, new fender and hood metal. The rebuilt engine has .090 over 4-ring high dome power pistons. This tractor has the extended 1947 steering wheel column,1946 gear shifter. It has a 1950's governor (rebuilt) with 1/4" aluminum shield for the proof meter mounted to the original dash housing. Repainted Ford grey. Rebuilt 3 point hydraulic system. When someone buys such a tractor, then changes the engine oil and filter, also the gear hydraulic oil at least once a year, this tractor should last another 50 years! Invested $6000, will sell for $4500; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)

Ford heavy duty 50" loader with front pump, heavy duty bucket, step through model, $1400; Bud Combe nnn-nnn-nnnn (Grants Pass OR)

Ford tractor shop manual, FO-201. Covers Fordson Major diesel. Excellent condition. Produced by I & T Shop Service, $28; Wendell Newman nnn-nnn-nnnn (Carson City NV)

Fordson, 1918, nice tin, faded paint, on rubber, comes with a full set of steel wheels, runs on coils, $2000; Jim Sorenson nnn-nnn-nnnn (Mt Vernon WA)

Harris Power Horse with 4 wheel drive and Chrysler industrial engine, $5000; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

International 350 Hi-Utility fast hitch 1 remote runs needs TA work, $1000; Mark Parker nnn-nnn-nnnn (Lebanon OR)

International 460 Utility with 282 cu/in diesel engine, $1800 or good offer; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

International 460 Utility with 301 cu/in diesel truck engine, $1800 or good offer; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

International T6 late model, parts only. Engine (stuck) through final drive sprockets only. Said to have rolled off trailer before the idiot started cutting it up. Saved what I could. Tractor is in Redcrest CA, $1000 obo; John LaBoyteaux nnn-nnn-nnnn (Upper Lake CA)

International TD-6 1940 or 1941 diesel engine runs good and strong. Gas system does not work but is all there. Must tow start to run. Has a home-built straight dozer blade. This unit spent many years packing silage pit 2 times a year. Believe to be a lower hour unit, undercarriage has wear on it but is still very much usable, $2500. I am 10 minutes away from WHEAT swap meet. Come check it out or I can send pictures; Jason Alvernaz nnn-nnn-nnnn (Turlock CA)

John Deere 30" cast centers for rack and pinion axles, fits 50 to 730 and newer, part # F1590R, $50 each; Mark Parker nnn-nnn-nnnn (Lebanon OR)

John Deere 530, looks good, $4700 or good offer; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

John Deere 60 parted out, lots left: crank, head, grill, hood, plus misc. parts, call with needs; Mark Parker nnn-nnn-nnnn (Lebanon OR)

John Deere 620 LP Black Dash, runs, on 42" rubber with 16" single front with 3pt, no top link Airstack new battery box, cables and seat cushions, or John Deere 720 gas Black Dash turns over on 42"rubber with 16"single front with 3pt no top link dual hydraulics Airstack, $2750 each or $5000 both; Mark Parker nnn-nnn-nnnn (Lebanon OR)

John Deere 70 diesel standard, adjustable front end, runs and drives, good sheet metal, air stack, power steering. Tires 50%, lots of cracks, pony has a bad rod, $2750; Mark Parker nnn-nnn-nnnn (Lebanon OR)

John Deere AN, 1947, slant dash, nice tin & paint, new battery, single front tire, runs good, $3200; Jim Sorenson nnn-nnn-nnnn (Mt Vernon WA)

John Deere AR, $2500; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

John Deere AR, 1937. Older restoration, nice running tractor with new rear tires. Good paint and sheet metal. Used at many local events and parades, $3800 obo; Tim Morris nnn-nnn-nnnn (Napa CA)

John Deere AR, 1939, runs, shown at Tillamook Oregon show each year. On steel wheels plus extension rims, $5000; Mike Watson nnn-nnn-nnnn (Sherwood OR)

John Deere B, 1938. Long frame model, engine rebuilt, good period tires, rear spokes, very good unstyled tractor ready for paint, $3250; Don Chappell nnn-nnn-nnnn (St Helens OR)

John Deere B, 1944, hand start, with two new front tires, good tin, runs, $1600; Jim Sorenson nnn-nnn-nnnn (Mt Vernon WA)

John Deere B, 1947. Very nice tin, decent tires. Complete. Engine is stuck, $700 obo; Jake Winn nnn-nnn-nnnn (Albany OR)

John Deere B, 1951, with John Deere No.5 hydraulic 7' sickle mower. Has electric start, lights, live hydraulics, Roll-o-matic front end, all new tires. Engine has had recent valve job. Tractor repainted a few years ago and used very little since. Nice sheet metal and always stored inside. Starts easy and runs very well, $3250 or offer. No trades; Ken nnn-nnn-nnnn (Eugene OR)

John Deere BN, 1939 with excellent factory flat spoke rear wheels, hand start, good condition, $1900; Bob Gauntt nnn-nnn-nnnn (Vancouver WA)

John Deere D 1928 Unstyled. Brass tag #70786. Runs. Some work done. K Brunner wheels in back. Spokes in front. Average rubber, $1500 obo; Dick Wilson nnn-nnn-nnnn (Kingsburg CA)

John Deere D on steel, rear wheels have extensions, tractor sat for years but motor will turn over, tractor looks to be 95% complete, as for originality I am not positive but looks all original. Has nice tag. Sn 51709. Tractor overall looks to be in good shape, rear fenders do have some rust through them but very repairable. Hard to believe this old tractor is 90 years old, $2700; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)

John Deere D, 1946, styled. Complete but engine stuck, $1675; Don Chappell nnn-nnn-nnnn (St Helens OR)

John Deere Early A and AR magneto Fairbanks Morse DRV2A, rebuilt in great condition, $400; Mark Parker nnn-nnn-nnnn (Lebanon OR)

John Deere H 1945, with a 4-row cultivator, hand start, runs good; J. Keith nnn-nnn-nnnn (Hermiston OR)

John Deere H, runs, good sheet metal, new front tires, good rear tires, $1900 obo; Dave Gallant nnn-nnn-nnnn (Boring OR)

John Deere LA, 1946, sn 11152. Presents well enough to have been taken to the County Fair. Clean. Starts easy, idles, throttles up. Good rubber. Overall condition is better than average for antique of age. Sickle bar included if you want it. Various books, receipts, etc. included. $2500; Buck or Gary nnn-nnn-nnnn (Bremerton WA)

John Deere M, older restore, look good and runs good, $3200; Dell nnn-nnn-nnnn (Buhl ID)

John Deere MC, 1949, sn 10007. Seventh MC off production line built in Yakima WA. Tool bar made by John Deere Yakima Works of Deere and Company. Has flat pulley and splined pto. Tractor is unrestored and all original. Tractor has been stored inside and runs and steers beautifully, $5000; Richard Blodgett nnn-nnn-nnnn or xxxx@xxxx.xxx (Citrus Heights CA)

John Deere MI, 1951. Very nice running tractor. New clutch, radiator, hoses and all 4 tires replaced. Nice little rare tractor, $2650; Tim Morris nnn-nnn-nnnn (Napa CA)

John Deere parts for late model B Roll-O-matic, $100. Two radiators, $75 ea. Two sets of long rear axles, $150 each set; Steve Zane nnn-nnn-nnnn (Paynes Creek CA)

John Deere Tractors: John Deere 60 N LPH high seat, breaker less ignition, new wiring harness, hot coil. 49 MTW, adjustable front axle, new wiring harness, new front tires. 64 4020 Row Crop diesel power shift, m&w turbo, 115 hp at the pto, new wiring harness, new batteries, rebuilt starter, gauges all work, rear tires good, front tires need to be replaced. John Deere starter L w\starter, battery, generator and lights; Call or text Tim Carleton nnn-nnn-nnnn (Lake Stevens WA)

John Deere tractors: John Deere A, 1945. John Deere A, 1948. John Deere A, 1952. John Deere BN, 1947. John Deere BNH, 1945. John Deere BO, 1937, on steel. John Deere BR, 1936, on steel. John Deere R, 1951. All of these tractor will start and run, some need work; Chris nnn-nnn-nnnn or xxxx@xxxx.xxx (Camano Island WA)

Kubota B6100 and 7100 creeper transmission adapter bolt on $75 parts; nnn-nnn-nnnn or xxxx@xxxx.xxx (Beavercreek OR)

Kubota hood: Near new hood for Kubota B2350 and BX1860, $100 each; nnn-nnn-nnnn or xxxx@xxxx.xxx (Beavercreek OR)

Kubota L245, L295, L2800 and B7100 parts; nnn-nnn-nnnn or xxxx@xxxx.xxx (Beavercreek OR)

Kubota L295 engine rebuilt complete $2750 parts; nnn-nnn-nnnn or xxxx@xxxx.xxx (Beavercreek OR)

Long Model A, 1949, very rare, only model made, restored, painted, all new tires. Serial No 490193. These tractors sold over $20K in U.S.; my price $15,000 CAD; Don nnn-nnn-nnnn (Innisfail AB Canada)

Magnetos and starters from Cletrac HG, Oliver OC3 crawlers, some rebuilt, some good used, some cores, starting at $75 each up to $225; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)

Massey Ferguson 135 diesel. Early serial number, rebuilt motor, needs head re-torqued and valves adjusted. New clutch, new brakes, quite a few new parts on it. Loaded rear tires. Sheet metal is off the tractor and it will need a battery. It runs, but not at this time. It could use new sheet metal as it is not the greatest. I'm just burned out on the tractor and don't want to mess with it anymore. I can provide pictures and SN, $3000 obo; Andy Dial nnn-nnn-nnnn (Prosser WA)

Massey Ferguson 97, extra fine. Many trophies at 10000lbs. Also road at 20mph. 504 cu in MM diesel. Kept in heated shop, $10350. May consider Scout II on trade; George nnn-nnn-nnnn (Albany OR)

Massey Ferguson 97, Wheatland, diesel, 1962, 93 hp, 18.4-34 rears, 9.5-24 fronts, front wheel assist, shop built cab, 1 remote, good sheet metal, running condition. Can send pictures, $3900 obo; Ronn Boehlke nnn-nnn-nnnn or 541- 892-5013 or xxxx@xxxx.xxx (Klamath Falls OR)

Massey Ferguson 97, Wheatland, diesel, 1963, 93 hp, 23.1-26 rears, 9-24 fronts, front wheel assist, no cab, 1 remote, good sheet metal, not running. This tractor has the big front axle. Can send pictures, $2500 obo; Ronn Boehlke nnn-nnn-nnnn or 541- 892-5013 or xxxx@xxxx.xxx (Klamath Falls OR)

Massey Harris 101 Jr. Standard, runs, needs side panels, $700; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Massey Harris 81 tricycle. All original tires, paint, lights. Runs, need rewired, $1300; Mark Parker nnn-nnn-nnnn (Lebanon OR)

McCormick Deering I-4, turns over, good shape, $950; Mark Parker nnn-nnn-nnnn (Lebanon OR)

McCormick Deering O-4 parting out: orchard belt pulley, shutters, plus misc parts.; Mark Parker nnn-nnn-nnnn (Lebanon OR)

McCormick Deering O-4, runs, missing orchard sheet metal, $1000. McCormick Deering O-4, very early motor stuck, missing orchard sheet metal, $650; Mark Parker nnn-nnn-nnnn (Lebanon OR)

McCormick Deering rare ODS-6s Orchard diesel, engine free, and 1 parts tractors. Both for $1600 obo; Mark Parker nnn-nnn-nnnn (Lebanon OR)

McCormick Deering TD-6 motor parts block head; Mark Parker nnn-nnn-nnnn (Lebanon OR)

McCormick Deering, 1939, good sheet metal, good tires, $700; Johnnie Everitt nnn-nnn-nnnn (Ridgefield WA)

Minneapolis Moline 445 Universal, gas, 1956, 38 hp, 13.6-38 rears, 16” fronts, 2 remotes, 3point, 540 RPM PTO good running condition. Can send pictures, $3500 obo; Ronn Boehlke nnn-nnn-nnnn or 541- 892-5013 or xxxx@xxxx.xxx (Klamath Falls OR)

Minneapolis Moline G1000 Wheatland diesel, 1966, 105 hp, 18.4-34 rears, 1100-16 fronts, factory cab with all glass, 4 remotes, amplitorque, good sheet metal, duals. Can send pictures, $3900 obo; Ronn Boehlke nnn-nnn-nnnn or 541- 892-5013 or xxxx@xxxx.xxx (Klamath Falls OR)

Minneapolis Moline GBD, 1953, runs good, mostly used in parades in Fullerton CA, $3500; Bob Rasmussen nnn-nnn-nnnn (Fullerton CA)

Minneapolis Moline GVI, diesel, 1960, 68 hp, 23.1-34 rears, 7.50-18 fronts, cab with all glass, good sheet metal, 2 remotes, WITH 9ft Cancade hydraulic, two way, front blade. Can send pictures, $3900 obo; Ronn Boehlke nnn-nnn-nnnn or 541- 892-5013 or xxxx@xxxx.xxx (Klamath Falls OR)

Minneapolis Moline UTS, 1940, kit tractor (disassembled), have all the parts, cylinder head OK, it has been Magnafluxed + valves were ground, block has been bored and sleeved, $650 obo; nnn-nnn-nnnn (corrected) or xxxx@xxxx.xxx (Moreno Valley CA)

Minneapolis Moline ZAN, 1949, not running, engine stuck, mostly complete except missing starter and carburetor, hood has typical rust, needs one rear tire, has two rear wheel weights on each side, parts or possible restoration, as is, $500 obo; Ronn Boehlke nnn-nnn-nnnn or 541- 892-5013 or xxxx@xxxx.xxx (Klamath Falls OR)

Oliver 60 row crop, engine turns over, $325; Jerry Van De Walle nnn-nnn-nnnn (Yamhill OR)

Oliver 80, Wheatland, $2000; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Oliver 990 GM diesel 1960 twin stick pto and hyd motor stuck, needs radiator, $6500 or trade for John Deere 830 electric start; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Oliver OC46 3/4 yard crawler front end motor. Recent major repairs, new paint, very good undercarriage, ideal for snow removal, $3500; Bob Qualey nnn-nnn-nnnn (Silverton OR)

Orchard tractors: Ferguson TO30 1951 model, $1,600. Massey Ferguson MF35 Deluxe, $2000. Neither one has been used for 5 or 6 years; Carl nnn-nnn-nnnn or cell nnn-nnn-nnnn (Newberg OR)

Parting out several John Deere A's and B's. Call or email with your needs; Chris nnn-nnn-nnnn (Camano Island WA)

Parting out: Massey 65 gas. Deutz 4005. Oliver 77. Allis Chalmers K-35. Minneapolis Moline M5 diesel. Caterpillar 10. Caterpillar 20 parts; Buck nnn-nnn-nnnn (Greenville IL)

Power Horse, Model A20, 1938. Made in Salt Lake City, UT. $9990; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Prescott tractor, missing hood, engine stuck. Located in Stanwood, Washington. Was built by the Prescott Iron Works in Seattle.  This particular one has a Ford Model B engine in it, Rear end, steering and suspension were Model T and the transmission is Model A ; Chris nnn-nnn-nnnn or xxxx@xxxx.xxx (Camano Island WA)

Rumely Oil Pull type M 20-35, older restore, in good condition, made in 1926, $22800; Dell nnn-nnn-nnnn (Buhl ID)

Tires: Two 12.4/11 x 36 on 11" rims welded to Oliver 9-hole centers. Tires hold air for an extended time. Minimal tread. Free if you come get them; Mark nnn-nnn-nnnn or xxxx@xxxx.xxx (Hillsboro OR)

Tractors: Allis Chalmers G and other makes and models; Jerry Fischer nnn-nnn-nnnn (Gaston OR)