3-pt equipment: One disk, 7ft, 3-pt, $500; One Howes rotary mower, 6ft, 3-pt, $400; John Deere Graymor 205 rotary mower, 5ft, needs work, $400; Howard rototiller, 4ft, $700; Ron Hunt nnn-nnn-nnnn (Woodland CA)
Air compressor: Small Air Compressor 11” flat belt pulley. Runs on 1/4 hp electric motor. Makes a great display, $175; Les Wallace nnn-nnn-nnnn (Oak Grove CA)
Airplane: 1969 Cessna 150J Texas Taildragger conversion. 4235 total air frame time. 743 hours SMOH. Needs paint job and TLC. Currently out of annual inspection. Good airplane with lots of time left; Richard Sydow nnn-nnn-nnnn (Sonoma CA)
Akron Brass Water Cannon with three 2-1/2" x 50' fire hoses; Mert Griffin nnn-nnn-nnnn (Clatskanie OR)
Backhoe attachment for Skid-Steer loader (Bobcat), made by Case, model 100, 8-way hydraulics action, $2050; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
Backhoe attachment for Skid-Steer loader (Bobcat), model 909, 8-way hydraulics action, $4850; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
Backhoe attachment for Skid-Steer loader (Bobcat), model 909, 8-way hydraulics action, $4900; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
Backhoe attachment for Skid-Steer loader, Bobcat, 8-way hydraulics action. Made by Case, Model 100, $2100; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
Bailer: John Deere W-2 bailer, 1956. Excellent shape but has been sitting for 5 years, $800 obo; Joe nnn-nnn-nnnn (Railroad Flat CA)
Basket hay rake, ground driven, works good, $150 obo; Joe nnn-nnn-nnnn (Railroad Flat CA)
Battery charger: Have a gas engine hand-carry 6-volt battery charger with Montgomery Ward tag on it, very old. Pics upon request; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
BeGe 10 foot pull scraper and also a BeGe pump that fits Caterpillar D2 and D4; David Giordano nnn-nnn-nnnn (Oroville CA)
Black walnut cracker, have two of them, call for price. Black walnuts, washed and ready to be cracked, 5 lbs for $15 plus shipping; Joe Keith nnn-nnn-nnnn (Hermiston OR)
Blade: Rear blade for a three point hookup for your tractor. Heavy duty. Unknown brand, $350. Will email picture; Ronald Tooley nnn-nnn-nnnn or xxxx@xxxx.xxx (Washougal WA)
Boat carrier for top of camper, $100; Earl L Wacker nnn-nnn-nnnn (Penngrove CA)
Brake: Hand operated brake for light gauge sheet metal up to 12” wide. In operating condition, manufacturers name is too faded to read, likewise seal of state, perhaps Michigan, is only partially readable. Operating hand lever can be used on either the right of left side. The brake is mounted on a sturdy metal stand 33-1/2” high with two metal shelves 11-1/2” x 17-1/2”, $100 obo; Ed Ristow nnn-nnn-nnnn (South Pasadena CA)
Brush Hog rotary mower. 6', PTO drive 540 RPM, 3-pt mount. good condition, make unknown. This is a big heavy duty mower, $850 obo, can send pics; Ronn Boehlke nnn-nnn-nnnn or nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
Camper: Sears Ted Williams Camper, "TENT" trailer. It was first sold in 1964. We have owned it since about 1977. The unladen weight is 460 lbs. There is some rust and all three tires hold air but are not roadworthy. The tent part is only good to use as a pattern for a new one. There are several clubs that specialize in vintage campers. $575 as is, cash only. Email for more info; Fred Alexis nnn-nnn-nnnn or nnn-nnn-nnnn or xxxx@xxxx.xxx (La Grande OR)
Case threshing machine, 1918, 20”, last used September 2016, $500; Jim Matson nnn-nnn-nnnn or xxxx@xxxx.xxx (Columbia Falls MT)
Caterpillar 25KW generator set with direct start D2 engine, works; David Giordano nnn-nnn-nnnn (Oroville CA)
Cement mixer with Stover CT2 engine, $700; Earl L Wacker nnn-nnn-nnnn (Penngrove CA)
Chainsaws: 12 Chainsaws for sale. Homelite XL-92, XL-12, Super XL, 3 XL-2's (one with case), 4 Super Easy, Eager Beaver 2016, Remington Bantam, Stihl 021 plus 5 boxes full of miscellaneous parts, chains, bars, engines, etc. Buy all for $450 obo; Roy nnn-nnn-nnnn (Canby OR)
Corn planter: John Deere 2-row 3-point planter needs repair, $75; Jerry Van De Walle nnn-nnn-nnnn (Yamhill OR)
Cultivator for International Cub. Attached to hydraulic control, $200; Nick Neuburger nnn-nnn-nnnn eves (Galt CA)
Cushman motor cycle parts: frames, engines and more. Call to see if I have it; Earl L Wacker nnn-nnn-nnnn (Penngrove CA)
Doors: two steel shop doors, 3' x 7' for 6" wall, lever lock with keys, new in crate, $100 each; Mert Griffin nnn-nnn-nnnn (Clatskanie OR)
Drag saw: Vaughn drag saw, very nice, $295; Clifford Bartyzal nnn-nnn-nnnn or xxxx@xxxx.xxx (White City OR)
Dragon Fly air drive outboard. 32" propeller, made by Robertson Hedge Inc. Kansas City, Missouri. Mounts like out board motor on either a boat or iceboat. Comes with 3 runner ice boat, not running, but engine is free and has compression, $750; Jim & Mary Jensen nnn-nnn-nnnn (Canyon City OR)
Foley lawnmower sharpener, model 388, with lift, great condition, price reduced to $350 obo; Jim Lovelace nnn-nnn-nnnn (Bend OR)
Forklift: Hyster 60 Boxcar special forklift. No brakes, hard rubber tires, no side shift, 10' mast. Now the good parts, newly rebuilt engine by West Bearing Inc. in Portland OR, new starter, new 12v alternator, new battery, very good paint, propane with full extra tank. Very nice lift truck, $1250 obo; Don Chappell nnn-nnn-nnnn (St Helens OR)
Front end loader: Westendorf TA76, 8’ bucket, complete, loader is rated for tractors up to 140hp, $1650 obo, can send pics; Ronn Boehlke nnn-nnn-nnnn or nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
Fuel tank: Titan 39 gallon fuel tank, fits 2001-2010 GM Extended Cab Short Box, $400; Bill nnn-nnn-nnnn (Bellingham WA)
Hitch: B and W Turnover ball gooseneck hitch, fits GM 2500-3500, $125; Bill nnn-nnn-nnnn (Bellingham WA)
Gas Pump: Old Skelly gas pump, have not used but was said to be operational when I got it, OK condition, $350; Jerry Walusiak nnn-nnn-nnnn (Lebanon OR)
Gas pumps: One Bennett, model 766, spec 766 1060. One Wayne model 80, sn 87748. Both complete with pumps; Brian nnn-nnn-nnnn (Centralia WA)
Generator Signal Corps radio power, battery charger, new with tools and spare parts, $250; Bill Bartlett nnn-nnn-nnnn (Cotati CA)
Generator: 18000 watt generator, Deutz diesel powered 110/220, $1800; Wyatt Cal nnn-nnn-nnnn (King City CA)
Generator: MITM 8KW gas portable generator, USA made, new, $800; nnn-nnn-nnnn or xxxx@xxxx.xxx (Beavercreek OR)
Graco Fire Ball 300 Air Grease Pump $250; Mert Griffin nnn-nnn-nnnn (Clatskanie OR)
Grader: Horse drawn antique grader, complete, $500 obo. Photos available upon request; Joe Scott nnn-nnn-nnnn (Baker City OR)
Grain drill: Case 5' grain drill, works good, $400 obo; Joe nnn-nnn-nnnn (Railroad Flat CA)
Grist mill and corn sheller, both flat belt driven; Clifford Bartyzal nnn-nnn-nnnn or xxxx@xxxx.xxx (White City OR)
Hacksaw: Flat belt power hacksaw, Millers Falls patent date 1893, good condition no breaks or welds, $475; Mark Bruto nnn-nnn-nnnn (Placerville CA)
Harrow: International Harvester 14 foot transport disk harrow in good shape, hyd cylinder and hose go with. Located in White Hall MT, $1500 obo; Kurt Cordes nnn-nnn-nnnn (Burbank WA)
Hilti anchor Bolts: 10 packages of 10 each 3/4" x 14" anchor bolts, 25 tubes of Hilti Hit-hy 10 glue, $200; Mert Griffin nnn-nnn-nnnn (Clatskanie OR)
Implements: Dump rake, Van Brundt seed drill and IHC thrasher. These are in vintage condition, ready for restoration or yard art; Patty Marsh nnn-nnn-nnnn or Brian Wilson nnn-nnn-nnnn (Centralia WA)
Jaw Crusher 4x4, Samson, assay crusher. 16" flywheel, 12" pulley, can be run by an engine or manually. This is a break-down crusher that can be taken apart and transported easily, all the parts are numbered, $2500; Ron Ludford nnn-nnn-nnnn or xxxx@xxxx.xxx (Auburn CA)
Jaw Crusher 8x8, Golden State Ironworks, San Francisco. Heavy crusher, flywheels 32" diameter, 22" pulley wheel, weights approx. 2-ton, very good condition, turn-of-the-century era, $3000; Ron Ludford nnn-nnn-nnnn or xxxx@xxxx.xxx (Auburn CA)
John Deere 45 loader. Nice original condition, newer hoses and plumbing, all mounting hardware and brackets, $200, can email pics; Jake Winn nnn-nnn-nnnn or xxxx@xxxx.xxx (Albany OR)
John Deere 55 3-bottom trailer plow. Needs tires, one coulter doesn't match, one lever missing, $325; Don Young (lv msg) nnn-nnn-nnnn (Pearblossom CA)
John Deere 760 self-loading scraper. Runs, hydraulics work, ready to load on your lowboy or hauling can be arranged. 9-1/2yd capacity, has some needs, but you will have all the attention at the next earth moving event!, $5500 obo, pics on request; Danny nnn-nnn-nnnn (preferred) (lv msg); Jon Rodgers nnn-nnn-nnnn (Sonora CA)
John Deere 9 mower, $35; Don Young (lv msg) nnn-nnn-nnnn (Pearblossom CA)
John Deere CC cultivator. Needs tires, $325; Don Young (lv msg) nnn-nnn-nnnn (Pearblossom CA)
John Deere Number 20 3 pt rear scoop, $225; Dave Gallant nnn-nnn-nnnn (Boring OR)
John Deere pressure washer, Model A40 on original cart, 3HP electric Leeson motor frame G184T continuous duty, $200; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
John Deere tumble bucket fits three point, $225; Dave Gallant nnn-nnn-nnnn (Boring OR)
Kawasaki Mule 4x4 side by side UTV, gas, excellent shape; David Giordano nnn-nnn-nnnn (Oroville CA)
Kubota 5 ft dozer blade, model Kum215. Hydraulic 4-way for Kubota L185, L245, L245DT tractors. Will fit John Deere, Massey Ferguson and ? Sub frame, controls and hoses included. Barely used, $600; John Ostenson nnn-nnn-nnnn (Carson WA)
Kubota sandwich weights, 100 lbs each, have 4, $25 each; John Eckhardt nnn-nnn-nnnn (Cloverdale OR)
Land plane and older farm equipment for sale. Am willing to negotiate on prices; Cindy nnn-nnn-nnnn (Litchfield CA)
Land: Six 10-acre lots near Bouse, Arizona for sale. One lot has a 25x50’ metal building, well and septic. One 10-acre lot has well and septic. The other four 10-acre lots are surveyed and approved for building. Health is forcing need to sell or trade. Someone make an offer; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)
Lathe: Atlas metal lathe, Model TH42, 3 & 4 jaw chucks, 4”-6”-8” face plates, dogs, steady rest, milling attachment, 10” swing grinding attachment, 10” swing and misc. tools; Danny Ponce nnn-nnn-nnnn (Los Angeles CA)
Loader buckets, have two. One 4-yard, $400. One 3-yard, 3-yard, $300; Mert Griffin nnn-nnn-nnnn (Clatskanie OR)
Loader for Massey Ferguson or Ford type, hydraulic tilt, $350; Ron Hunt nnn-nnn-nnnn (Woodland CA)
Loader frame with bucket. No hydraulics, rams or pump. This is a walk-through frame with lift arms and bucket. Fits Ford N and Ferguson TO model tractors. Will help you load, $75 obo; Jon Rodgers nnn-nnn-nnnn or xxxx@xxxx.xxx (Sonora CA)
Log splitter, Brave Industries, 8hp B.S., $600; Ron Hunt nnn-nnn-nnnn (Woodland CA)
Logging grapple for 3 point hitch with hydraulic grapple arm for skidding logs; David Giordano nnn-nnn-nnnn (Oroville CA)
Magazines: I have issues of "Old Abe News" which is the publication of the J I Case Collectors Association. They include all of the issues from the winter of 1994 to the summer of 2005. (Except winter of 1999). I also have "Antique Power Magazine" from 1997 thru 2009. (Missing a few issues). Free to good home; Don Studier nnn-nnn-nnnn (Corvallis OR)
Manure spreader wood on steel wheels, make offer; Wyatt Cal nnn-nnn-nnnn (King City CA)
Maytag washing machine, 1930’s. Has gas engine, complete with extra mufflers and exhaust pipes, carbs, and oil cans marked Maytag, $350; Thomas Bastian nnn-nnn-nnnn (Cave Junction OR)
Meyers water pump, bulldozer 6x6 flat belt driven, inspected and painted, $300; Jim Gardner nnn-nnn-nnnn or xxxx@xxxx.xxx (Vernonia OR)
Mitre Box Instructions and Parts List for setting up and operating Millers Falls Langdon Acme, Langdon and All Steel mitre boxes, 26 pgs plus cover, 1962, $2.00 includes S&H; George nnn-nnn-nnnn or xxxx@xxxx.xxx (Beaverton OR)
Mower conditioner: International model 990, 9’ cut needs repair lots of usable parts, $275; Jerry Van De Walle nnn-nnn-nnnn (Yamhill OR)
Mower: Case Model 602 field cutter. The part holding blades broke, otherwise in working condition. This is an older trailer type field cutter. I will email a picture. Make an offer; Ronald Tooley nnn-nnn-nnnn (Washougal WA)
Mower: International 6’ 27-V tractor mower. Single wheel. Bolts to H or M Farmall and adaptable to most other tractors with brackets; Wendell Newman nnn-nnn-nnnn (Carson City NV)
Mower: PTO driven tow-behind mower with good tires, dual blade, works great, $200 obo; Joe nnn-nnn-nnnn (Railroad Flat CA)
Old hay rake for yard art, $50. Lots of old circular saw blades, around 30 inch diameter $40 each, have several. Several drag saw blades, two man saw blades, $30 each. Old screw type house jacks, need cleaned up and oiled, $25 each. Old steel spoke wheels, $50 and up. Lots of yard art items, sell one or all; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
Older Mini Case Davis crawler trencher Model T-66, runs drives and operates but of course has wear, comes with original manual, $1200; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
Onan power plant, V4 water cooled engine, electric start, $500; Don nnn-nnn-nnnn (Whitehall MT)
Onan twin cylinder power plant, 3500 watt, rope start, completely over hauled, $150; Don nnn-nnn-nnnn (Whitehall MT)
Plow: John Deere plow, trail type. 3-14” hydraulic lift with your cylinder, $145; Hubert Bierly nnn-nnn-nnnn (Bend OR)
Plow: Two-way Syracuse plow for Model M John Deere, $525; Dave Gallant nnn-nnn-nnnn (Boring OR)
Powermatic Houdaille 6” jointer, model 50, table size 7” x 48”, good condition, $400 obo, can send pics; Ronn Boehlke nnn-nnn-nnnn or nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
Pressure washer: John Deere pressure washer, Model A40 on original cart, 3 hp electric Leeson motor frame G184T continuous duty, $180; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
Roofing: Hi-rib, 36”, 26 gauge Galvalume roofing. Approximately 125 pieces, about 21’ long, $40 per piece; Ronn Boehlke nnn-nnn-nnnn or nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
Scoop, 3 point, $100; Earl L Wacker nnn-nnn-nnnn (Penngrove CA)
Scraper: 3 point, 5 feet wide, $200; Earl L Wacker nnn-nnn-nnnn (Penngrove CA)
Scrapers: 2 Fresno scrapers, single bottom plow, all cast iron; Wyatt Cal nnn-nnn-nnnn (King City CA)
Scythe, 70 years old, excellent condition, used very little, $115; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
Scythe, 70 years old, excellent condition, used very little, $125; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
Sewing Machine: Model 221 Singer Feather Weight sewing machine, very good condition, $500; Joe Keith nnn-nnn-nnnn (Hermiston OR)
Shelf units: 96” long, 84” tall. Bins on both sides out of John Deere dealership. Needs repair, $50. Bin unit 87” long, 70” tall, 24” wide with 24 bins, 10”x11”x17”, 12 each side with shelf under them made out of old boards, $50; Jerry Van De Walle nnn-nnn-nnnn (Yamhill OR)
Shelving cross pieces for adjustable shelving, have lots, make offer; Joe Keith nnn-nnn-nnnn (Hermiston OR)
Single row horse cultivators and plows, asking $125 each obo; Dave Gallant nnn-nnn-nnnn (Boring OR)
Snow chains for big rigs: 3 sets cable chains, new in box, 10.00-20 or 11.00-22.5, $65 per set. New in bags a set of heavy duty double railers, real chain with grabber bars, 10.20-20 or 11.00-22.5, $350 set; Bob Folk nnn-nnn-nnnn or xxxx@xxxx.xxx (Eastsound WA)
Snowmobile: old Skiroule snowmobile for parts or restoration. Has been sitting for years, was running when parked, hood is cracked, do not know model, 1064 miles, you haul, can email pics, $100; Carol nnn-nnn-nnnn (Keno OR)
Stock trailer: Circle J, 1976, 18ft (?), $900; nnn-nnn-nnnn, phone calls only (Goldendale WA)
Subsoiler: John Deere Killefer subsoiler, sn 20A-11; John Buckley nnn-nnn-nnnn (Kansas City MO)
Tire: 750-17” Radial tube Michelin, Load Range D, 85% tread, $50; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
Tires: Four 1300 x 24 grader tires. Two @ 50%, $130 each obo. Two @ 75%, $200 each obo; Bill nnn-nnn-nnnn (Bellingham WA)
Plow: Edwards Manufacturing single-bottom rollover 3 point plow, $150 obo; Bill nnn-nnn-nnnn (Bellingham WA)
Grader: Galion heavy-duty patrol grader, approximately 1940 or earlier. To restore or for parts, $1400 obo; Bill nnn-nnn-nnnn (Bellingham WA)
Trailer project, 22 foot small bus frame mounted on a Ford F550 rear truck axle and springs with an 18 foot flatbed just lying on top of it. I was going to make a hay hauler out of it, but I am not going to winter cows this year. The whole shooting match $500 obo or trade; Kurt Cordes nnn-nnn-nnnn (Burbank WA)
Trailer: Flatbed trailer built for 1-ton, 8x8 wood deck, metal frame, deck replaced 4 years ago, excellent condition, $300; nnn-nnn-nnnn, phone calls only (Goldendale WA)
Trailers: John Deere farm trailer, 16ft bed, side racks, new wheel bearings, new tires, and seals, hitch on back, $2500 firm; 20ft flatbed trailer, 82” inside wheel wells, headboard, spare tire, $2250 obo; 16ft flatbed trailer, beaver tail, ramps, 7000lb axles, needs work, $600 firm; Phil Wall nnn-nnn-nnnn (Enumclaw WA)
Trash burner wood stove, made by Frigidaire; Joe Keith nnn-nnn-nnnn (Hermiston OR)
Utility trailer 7’ x 16’. Wooden deck, duel axles, detachable steel ramps that store beneath the deck, G.V.W.R. 7000lbs, fits 2-5/16” ball. Built by Wilson Custom Trailer mfg of Post Falls, ID, June 1998. Original tires, deck needs replaced, $500; Richard Hanna nnn-nnn-nnnn or xxxx@xxxx.xxx (Hayden ID)
Valco boats: Have two. One 13ft, has trailer, no motor, $600; one 14ft, no trailer, no motor, $400; Ron Hunt nnn-nnn-nnnn (Woodland CA)
Wagon frame with axles, needs TLC, $100 obo; Joe nnn-nnn-nnnn (Railroad Flat CA)
Wards LoLoad farm wagon, 17” wards tires, $300; Bill Bartlett nnn-nnn-nnnn (Cotati CA)
Water pumps with flat belt pulleys for engine displays. Large upright Meyers 2 cylinder high pressure spray pump with gear driven jackshaft. 12"x 2.5" flat belt pulley. Pretty interesting pump with large pressure relief springs caged on top of each piston. On wheels (sort of). Nice looker, $350. Paul single cylinder pump 2.5"? 24"x 3" flat belt pulley and separate idler, two accumulators on top. About 4 ft. long. Painted up real purty-like. On skid, $225. Bean #1 spray pump, hand powered. Large accumulator with gauge on top, $100. Meyer pump jack, long stroke. No pump, $85. Meyer 2"? belt driven single piston pump. Rusty & unrestored. Turns fine, but I have not tried it out. Gears look great. All there, but extensive welding has been done on housing. Has 2 accumulators on top, $100. We ran the first 3 of these at our local show in August, and all worked well. Call for photos. Available for sale in Reno, or will bring to Woodland swap in Oct.; Ed nnn-nnn-nnnn (Sparks NV)
Welder: Miller 225G, Bobcat-CC/CV-AC/DC-Onan. 16XSL, engine stored in shed, not used for 13 years, $500; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
Welder: Miller 225G, Bobcat-CC/CV-AC/DC-Onan. 16XSL. Engine stored in shed, not used for 13 years, $450; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
Welder: Sonics 1080 Ultrasonic plastic welder with D800 power supply, $500 or trade; Mert Griffin nnn-nnn-nnnn (Clatskanie OR)
Welders: Two Lincoln SA 200 pipeline welders, both have long leads, very good condition, one on nice trailer $1500 obo, the other one, $750 obo; Don Chappell nnn-nnn-nnnn (St Helens OR)
Wheel weights: Set of 16” wheel weights, two halves per wheel, $200; Joe Keith nnn-nnn-nnnn (Hermiston OR)
Wood splitter: PTO driven wood splitter with hoist, on wheels and attaches to rear of tractor. Capable of splitting up to 7' fence posts, $1000 obo. Photos available upon request; Joe Scott nnn-nnn-nnnn (Baker City OR)
Yard art: City of Heppner fire hydrant, from 1968, $200; Joe Keith nnn-nnn-nnnn (Hermiston OR)