Bates & Edmonds 2 hp vertical Peerless, engine. On iron-wheeled wagon, runs, $4500; Ron Ludford nnn-nnn-nnnn or xxxx@xxxx.xxx (Auburn CA)
Black Bear 25 hp oil field side shaft engine. Mounted on a 10,500# ABU tandem axle trailer. 11" cylinder with an 18" stroke. 1760 c.i.d. Flat belt driven Pickering fly-ball governor latches exhaust valve open for hit and miss operation. Turns at about 50 rpm firing off about once a minute. Air start with on-board flywheel driven air compressor and air tank. Originally in the Montana oil fields for 40 years, restored and rebuild in the Pacific Northwest. Many technical and historical documents included. Licensed trailer, clear title. A real crowd pleaser at shows. Best offer; Doug Brookens nnn-nnn-nnnn or xxxx@xxxx.xxx (Issaquah WA)
Briggs & Stratton older engine, Model AP-205 255 101 904. 1-cylinder, air cooled, price reduced to $350 or good offer; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
Chrysler Industrial 6-cylinder flathead engine from a Massey Ferguson combine, price reduced to $350 or good offer; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
Crank guard for Root & Vandervoort 1 hp engine, $35; Dave nnn-nnn-nnnn (Aurora OR)
Drag saw engines: Two old drag saw engines, free, missing parts, $40 for both; Dave nnn-nnn-nnnn (Aurora OR)
Economy 2-1/2 hp E, turns free, needs a few parts, good project, $175; Dave nnn-nnn-nnnn (Aurora OR)
Engines: Several engines for sale. Detroit 2 hp on skid with complete homebuilt cooling tank and ignition systems. Nice little engine, $600. Witte 2 hp? Hopper cooled throttle governed engine. Very clean, good running, with hand crank and Wico mag, $700. Fuller Johnson 1.5 hp hopper cooled. Restored, nice clean engine with stainless fuel tank, PTO pulley, pin-striping and low tension coil, good runner, on skid. Nice little engine, $700. Stover CT3, no mag, not stuck, good compression. PTO sprocket for flat link chain, $350. Novo 3 hp upright hopper-cooled engine with Wico mag and hand crank. Turns over, but have not tried to start it. Looks original, $750. Barn fresh (always wanted to say that) John Deere 3 hp throttle-governed engine. Not stuck, good compression. Unrestored, lots of original paint still there, on skid with mag and ignitor. Have not tried to start it, $1100. All available for sale in Reno, or will bring to Woodland in October. Can send pics; Ed nnn-nnn-nnnn (Sparks NV)
Fairbanks 1-1/2 hp C. Power plant, very good condition, 36v, 41 amps, $450 obo; Clifford Bartyzal nnn-nnn-nnnn or xxxx@xxxx.xxx (White City OR)
Fairbanks H 2 hp. On iron-wheeled wagon, embossed Fairbanks Morse lettering on the hopper, complete, running engine, restored, great little runner, $1500; Ron Ludford nnn-nnn-nnnn or xxxx@xxxx.xxx (Auburn CA)
Fairbanks H 4 hp. On iron-wheel wagon, embossed Fairbanks-Morse lettering on the hopper, complete, not running, no cracks, great little engine to complete, $1250; Ron Ludford nnn-nnn-nnnn or xxxx@xxxx.xxx (Auburn CA)
Fairbanks Morse 1-1/2 hp, headless. On iron wheeled wagon, good runner, $550; Ron Ludford nnn-nnn-nnnn or xxxx@xxxx.xxx (Auburn CA)
Fairbanks Morse 3 hp Z, mostly complete with mag, old restoration, $250; Dave nnn-nnn-nnnn (Aurora OR)
Fairbanks Morse, Jack Junior, 1910. Older restoration, old weld repair on main bearing cap and small piece broke out of piston skirt, runs nice, $750 or possible trade for throttle governed engine, email for pics; Tanner Remillard nnn-nnn-nnnn or Chopper_iron@hotmail (Pendleton OR)
Fairbanks N 12 hp. On iron skids, complete, running engine, screen cooled tank, has been to many shows around the country, $10000 firm; Ron Ludford nnn-nnn-nnnn or xxxx@xxxx.xxx (Auburn CA)
Fairmont railroad engine, $400; Earl L Wacker nnn-nnn-nnnn (Penngrove CA)
Fairmont engine with spoke wheels, used on the railroad in days gone by, never heard it run, looks to be in good shape, looks similar to hit and miss engine, unique looking with radiator, pics upon request, $500; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
Fairmont railroad section crew car engine, good condition, $350; Clifford Bartyzal nnn-nnn-nnnn or xxxx@xxxx.xxx (White City OR)
Fuller & Johnson 1-1/2 hp vertical pump jack in good condition, $500; Les Wallace nnn-nnn-nnnn (Oak Grove OR)
Gilson 5 hp, approx. 70% original paint, original muffler, no cracks, breaks or welds, $2250 with large belt pulley. Email for pictures and details; Kathy Repp nnn-nnn-nnnn or xxxx@xxxx.xxx (Snohomish WA)
Goulds 3-piston waterpump. Big unit, fully restored with visible crank and pistons, weighs over a ton, $1000; Ron Ludford nnn-nnn-nnnn or xxxx@xxxx.xxx (Auburn CA)
Hot air engine, walking beam style, good running, well built, makes a great display engine. 6” displacer cylinder, about 4 ft tall and 4 ft long, $300; John Bold nnn-nnn-nnnn or nnn-nnn-nnnn (Turlock CA)
Ideal air-cooled engine, $600; Les Wallace nnn-nnn-nnnn (Oak Grove OR)
IHC 2 hp vertical, 1904, very early s/n K-2651. Very good shape, no welds. Name plate reads IHC Vertical Patents pending, $2500; Les Wallace nnn-nnn-nnnn (Oak Grove OR)
IHC 2-1/2 hp Famous, sn GA-2416, 1911. Good condition on running gear, $3000; Les Wallace nnn-nnn-nnnn (Oak Grove OR)
IHC Titan Jr. 1hp, older restoration on trucks, $1800; Buck Evans nnn-nnn-nnnn (Greenville IL)
International 2 hp extended hopper hit & miss motor. Runs well, $400 obo. Photos available upon request; Joe Scott nnn-nnn-nnnn (Baker City OR)
John Deere 1-1/2 E engines, have 2 for parts or restore, $350 for both; Dave nnn-nnn-nnnn (Aurora OR)
John Deere 3 hp E, price reduced to $1650 or good offer; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
John Deere flywheel engine, runs, $700; Ron Hunt nnn-nnn-nnnn (Woodland CA)
John Deere LUC power unit with v-belt pulley, new clutch, runs good, $1000; Lew Ward nnn-nnn-nnnn (Brush Prairie WA)
John Deere Waterloo 5 hp K, original brass mixer, old repair on head, not stuck. Can email pics; Jim nnn-nnn-nnnn Mountain time (Missoula MT)
Maytag-Multi Motor (vertical), restored, $400; Les Wallace nnn-nnn-nnnn (Oak Grove OR)
McCormick Deering 1-1/2 hp M with cart, runs good, $500; Earl L Wacker nnn-nnn-nnnn (Penngrove CA)
McCormick-Deering 1-1/2 hp M, 1927. Antique gasoline throttle governed engine, fully restored, beautiful old engine runs good. Comes with cart, manuals, handbooks, catalogs, gas engine history and restoration instructions, restored by Steven Gray of Sonora CA. View a video of this engine running on YouTube: https://youtube/jjOyK8LvGeY, $1000 firm, will consider delivery in Western USA for a reasonable fee; Horace Crawford nnn-nnn-nnnn xxxx@xxxx.xxx (Walnut Creek CA)
Model engine: All new 1/3 scale model hit miss engine, The Flea. 6-5/8" diameter flywheels, 1-1/2" bore, 1-1/2" stroke, cast iron construction. Fully self-contained, finished and ready to run, $1500; Mark Bruto nnn-nnn-nnnn (Placerville CA)
Model engines: Vaughn model, runs good, was developed by Debolt Machine, $1800. Canfield model mounted with a model pump jack, runs good and pump jack pumps water, $2000; Carroll Pederson nnn-nnn-nnnn (Bonney Lake WA)
Monitor 5 hp on original, large iron cart, good compression, sn 9986, $2750. Email for pictures and details; Kathy Repp nnn-nnn-nnnn or xxxx@xxxx.xxx (Snohomish WA)
Montgomery Ward Airline Charger parts, $30; Jim Lovelace nnn-nnn-nnnn (Bend OR)
Montgomery Ward Wisconsin gas engine, restorable, ran 15 years ago, $120; Jim Lovelace nnn-nnn-nnnn (Bend OR)
New Way 2-1/2 hp vertical, s/n 1956. Good shape, needs restored. Have new fan shroud in box, $900; Les Wallace nnn-nnn-nnnn (Oak Grove OR)
Palmer 18 hp ZR2, 1932, sn 2850132, very rare stationary marine engine, never in salt water, last ran September 2016, $10000; Jim Matson nnn-nnn-nnnn or xxxx@xxxx.xxx (Columbia Falls MT)
Sandwich 4 hp. Nice tulip top Sandwich engine with Sandwich pulley(?) Hot Webster mag. Comes with original metal rails, $2250. Email for pictures and details; Kathy Repp nnn-nnn-nnnn or xxxx@xxxx.xxx (Snohomish WA)
Sparta Copper Economy 4 hp, 6” stroke, 4” piston. On cart, no tag. Great condition, $1200. Email for pictures and details; Kathy Repp nnn-nnn-nnnn or xxxx@xxxx.xxx (Snohomish WA)
Stover 1-1/2 hp K, 1921, sn K141403. Runs very slow, spoked flywheels, open crankcase, grease cup, rod bearing, oil hole main bearings, new gas tank, rebuilt Webster Tri-polar magneto, on 4 wheel cart. Runs good, $900; Danny Ponce nnn-nnn-nnnn (Los Angeles CA)
Stover 2 hp hit & miss motor with attachments, runs well, $475 obo. Photos available upon request.; Joe Scott nnn-nnn-nnnn (Baker City OR)
Stover 4 hp, good condition, $495; Clifford Bartyzal nnn-nnn-nnnn or xxxx@xxxx.xxx (White City OR)
Stover CT 3, runs good, fully restored, $500; Earl L Wacker nnn-nnn-nnnn (Penngrove CA)
Stover Y 1-1/2 hp, snT244732, restored on cart, $900, email for pictures and details; Kathy Repp nnn-nnn-nnnn or xxxx@xxxx.xxx (Snohomish WA)
Waterloo 5 hp, new rings and wrist pin bushing, not stuck. Can email pics; Jim nnn-nnn-nnnn Mountain time (Missoula MT)
Wisconsin AKN. Looks as new, mag rebuilt, etc, $125. Will bring to Woodland Swap Meet; Gustafson nnn-nnn-nnnn (Auburn CA)
Witte 20 hp on large iron spoke-wheel wagon, $7000 obo. Also many other smaller hit & miss engines from 1-1/2 to 6 hp; Tim Lundgren nnn-nnn-nnnn (Turner OR)
Witte 4 hp, sn 184915?, fully restored on oak skids, oak battery box, $900, email for pictures and details; Kathy Repp nnn-nnn-nnnn or xxxx@xxxx.xxx (Snohomish WA)
Worthington 1-1/2 hp, hit n’ miss, on cart, $350; Clifford Bartyzal nnn-nnn-nnnn or xxxx@xxxx.xxx (White City OR)