January 2016 - Tractors & Parts For Sale

All Classified Ads

Agricat crawler, hydraulic loader/bucket, good tracks, good condition, runs and drives well, $1300; Larry nnn-nnn-nnnn (Phelan CA)

Allis Chalmers B, 1940, sn B47590. Engine overhauled in 1995 but is now stuck. No oil pressure so parked and stored inside since. Fair rubber, good sheet metal, $500; Richard Hanna nnn-nnn-nnnn (Hayden ID)

Allis Chalmers B, 1950, parade ready, rebuilt engine, bearings and seals in transmission, new brakes, has hydraulics and pto, like new tires, paint and decals. Will be at the Portland Ag Show if I still own it. Pictures and more info on request, $3500; Dennis Kytola nnn-nnn-nnnn or xxxx@xxxx.xxx (Ridgefield WA)

Allis Chalmers D-14, 1960, with factory loader with front pump, Power Director, power steering. New radiator, water pump, belt, hoses, exhaust pipe/muffler, tach drive cable, oil filter, intake/exhaust manifold and gasket, steering arms and tie rods, gauges, paint, and more. Rebuilt original seat (bushings / bolts). Great sheet metal. Good 3-point. Good tires front and rear, $6500. Located in La Center, WA; call Iver nnn-nnn-nnnn (no texts) (Vancouver WA)

Allis Chalmers G, 1948, restored 3 yrs ago. New paint, 4 new tires & tubes. Transmission has the 2 low gears, converted to 12 volts. New lights, hydraulics, cultivator, extra trans & bell housing, $3500; Rex Wright nnn-nnn-nnnn (Ione CA)

Allis Chalmers M crawler good engine, transmission, steering clutches, and rear end. Tracks 40%. Needs minor work on the left track adjustment. The blade is too heavy for this machine, needs to be changed to a lighter one. $1500 obo; Tim Crockett nnn-nnn-nnnn (Centralia WA)

Allis Chalmers M crawlers (2) 1934 & 1937, good shape. Make offer; Bob Arndt nnn-nnn-nnnn (Cromberg CA)

Allis Chalmers tractor D14 hitch draw-bar and assembly, excellent condition, make offer; John nnn-nnn-nnnn (Dallas OR)

Allis Chalmers tractors: one CA with motor out, 4 speed trans, live pto, spin out rear wheels; two B’s, one for parts, the other could run. All three for $1000 obo; Nick nnn-nnn-nnnn or Bud nnn-nnn-nnnn (Grants Pass OR)

Allis-Chalmers Manual HD 7, HD 10, HD 14, Service, 131 pages, $40 post paid - HD 5, Service, 217 pages, $40 pp - HD 19, Parts, 189 pages, $30 pp – HD 7, Parts, No Cover, soiled, 118 pages, $15 pp – TL 14 & TL 14D, Tractor Loader, Service, Torque Converter Transmission & Charging Pump, dated 2/65, 56 pages, $20 pp – HD 7, Parts, soiled, 120 pages, $20 pp – HD 5, Parts, soiled, 174 pages, $25 pp – HD 6 A, B, E, Operator & Field Maintenance, 6/63, 59 pages, $20 pp – HD 10, Parts, 3/54, 211 pages, $25 pp – Buda Diesel, Model 6-D7-389 & 6-D7-468, Parts, 10/53, 68 pages, $15 pp – Farr Co. Air Cleaner Dealers Manual, 11/65, $15 pp – HD6 A, B, E, Parts, 252 pages, $30 pp – B-125 Power Unit, Operator & Parts, 108 pages, $15 pp – A-C Field Cultivator, Operator Manual, 4/74, 16 pages, $7.50 pp; Dick Lloyd nnn-nnn-nnnn, mailto:xxxx@xxxx.xxx (Lewiston ID)

Case DC parts for sale, 1950's, one complete transmission with rare extra wide axles for 98 inch tread, comes with fuel tank and dash, steering wheel, fenders, cast wheel centers, hydr pump, single disk brakes, clutch linkage, ready to bolt to engine $300 one case DC rear wheel weight $50 one front wide adjustable front for parts, off of a 52 $150; David Santoro nnn-nnn-nnnn (Hillsboro OR)

Case S, complete but not running, $750; Don Chappell nnn-nnn-nnnn (St Helens OR)

Case VA, 1948? Very good condition, $1750; Don Zimmerman nnn-nnn-nnnn (Hermiston OR)

Case wide tread tractor, 1936, on full steel, includes set of rubber tires & wheels plus a cultivator, $4650; Dave Gallant nnn-nnn-nnnn (Boring OR)

Caterpillar 10 & 15 gas tanks; Don Chappell nnn-nnn-nnnn (St Helens OR)

Caterpillar 30 wide tread, stuck, new track chain, $1500; Gene Stuckle nnn-nnn-nnnn (Davenport WA)

Caterpillar: Ensign carbs for Cat 20, 30 all rebuilt, $450. D2-D6 battery box covers with thumb screws, $80. D2 track adjuster covers, new, $450 pair; nnn-nnn-nnnn or xxxx@xxxx.xxx (Beavercreek OR)

Cletrac crawlers: AD 1937, & AD2 1936 with blade, good shape. Make offer; Bob Arndt nnn-nnn-nnnn (Cromberg CA)

Cletrac W crawler hood, not perfect but usable, $100; Joe Giordano nnn-nnn-nnnn xxxx@xxxx.xxx (Port Orchard WA)

Collection of original Caterpillar Manuals for early Cat equipment including dozers, graders, loaders, scrapers and others. Approximately 170 books. Would like to sell as a set but may sell individually @ $25.00 each. Will entertain offers as a collection; Don Chappell nnn-nnn-nnnn (St Helens OR)

Co-op E-3, 1949, wide front end, runs good, looks good, engine gone through with new water pump, rebuilt generator, carburetor, starter, average tires, also includes another E-3 parts tractor with a loose rebuilt Buda engine, $1400 obo or possible trade; Delmer Riel nnn-nnn-nnnn (Yakima WA)

Farmall 300-350 hydraulic pump; Al nnn-nnn-nnnn (Elko NV)

Farmall 300-350, hydraulic pump; Al Barkl nnn-nnn-nnnn (Elko NV)

Farmall 340, 1958, narrow front. Gas. Excellent rubber all around. T/A works. 1895 hours showing on hour meter. Needs a seat and battery box, $3200. Pictures on request; Jack Muirhede II nnn-nnn-nnnn or xxxx@xxxx.xxx (Albany OR)

Farmall A, restore or parts, good FFA project, $500 obo; Wendell Newman nnn-nnn-nnnn or xxxx@xxxx.xxx (Carson City NV)

Farmall Cub, 1950. Very unique with custom hydraulic belly blade and ripper bar. Very straight. Good for landscaping or corral, $1800 obo; Wendell Newman nnn-nnn-nnnn or xxxx@xxxx.xxx (Carson City NV)

Farmall Cub, 1952 , hydraulics, good tires, good sheet metal, runs and drives well, $1700; Larry nnn-nnn-nnnn (Phelan CA)

Farmall H belt pulley gear box, excellent condition, $65. Front radiator shutters and controls for H Farmall. Repainted, excellent, $80; Wendell Newman nnn-nnn-nnnn or xxxx@xxxx.xxx (Carson City NV)

Farmall H, 1940, sn 49095. Very complete and good tin. Tires ok, engine stuck, $1100 obo; Wendell Newman nnn-nnn-nnnn or xxxx@xxxx.xxx (Carson City NV)

Farmall M, tall tractor, gas, has gear type drop boxes and 20" single front. Engine free but not running, stored inside, good sheet metal and tires, $1200; John LaBoyteaux nnn-nnn-nnnn (Upper Lake CA)

Farmall MD, with live hydraulics and belly system, Behlen power steering, belt pulley, drawbar, runs well stored inside, good sheet metal, good rubber, new on narrow front, $2750; John LaBoyteaux nnn-nnn-nnnn (Upper Lake CA)

Farmall parts and tires. Call me with your needs and questions; Wendell Newman nnn-nnn-nnnn (Carson City NV)

Farmall Super C, 1952, wide front, 4 new tires & tubes, front loader w/hyd pump on front of engine, 3 new hyd. cyl., power steering, 3 point hitch w/2 new hyd. cyl., 3 pt backhoe, PTO pump, 12" bucket. Everything works, $3500; Rex Wright nnn-nnn-nnnn (Ione CA)

Farmall Super H 1954, new paint & decals 3 years, runs, drives, looks good. IH windbreaker included. Belt pulley, standard drawbar, IH muffler; Al nnn-nnn-nnnn (Elko NV)

Farmall Super H, 1954, windbreaker, belt pulley, remote hydraulics, IHC muffler; Al Barkl nnn-nnn-nnnn (Elko NV)

Ferguson 35 Special, 1960. New gaskets & seals in engine & trans., new axle bearings & seals in deff., high low trans, front loader, good rear tires w/new tubes, new tires & tubes on front, rear wheel weights. Runs good, $2200; Rex Wright nnn-nnn-nnnn (Ione CA)

Ferguson TO-30, 1952. Brand new battery. Was rebuilt 8-10 years ago. In good condition. Fair to good tires. Running well. Has a King Kutter 5 blade box scraper attached, $3000 obo; LaRee or Jerry at nnn-nnn-nnnn (Chico CA)

Firestone 13.6x28 tire, 50% tread, $125; Tom Smith nnn-nnn-nnnn (Creswell OR)

Ford 8N with loader. Runs & looks good, $3000; Jim Keith nnn-nnn-nnnn after 4:30PM (Cloverdale OR)

Ford 8N, 1948 Orchard or Vineyard tractor. Width cut down by machine shop. 3 point hitch, good tires, wheel weights on all 4 wheels, engine turns over, dist. missing, $475; Rex Wright nnn-nnn-nnnn (Ione CA)

Ford 8N, late model, side distributer, 12 volt alternator, good tires front and back, runs good, good tin, good 3 pt, pto, $2500; Larry nnn-nnn-nnnn (Dorris CA)

Ford 8N, restored, original rubber, newer paint, lights, front bumper, sn 177. Very very nice, $3875; Don Chappell nnn-nnn-nnnn (St Helens OR)

Ford 9N with Howard rotovator and creeper gear, 6 volt, starts and runs good, rear tires like new, straight tin, needs paint, works good, $2600 obo; Larry nnn-nnn-nnnn (Dorris CA)

Ford Golden Jubilee, been sitting for years, tires are bad, motor is stuck, has the Rupp Hi/Lo auxiliary tranny, good sheet metal, 3 point hitch, looks to be complete except rear fenders. Has good Jubilee Emblem in front, good for parts or restore, $950; Joe Giordano nnn-nnn-nnnn xxxx@xxxx.xxx (Port Orchard WA)

Ford rear wheel weights, 2 sizes, $100 per pair; Earl L Wacker nnn-nnn-nnnn (Penngrove CA)

FREE tractor tire, 16.9x28; Dave nnn-nnn-nnnn (Boring OR)

International 10-20 Titan, 1917, nice restorable tractor, not stuck, currently locating missing parts, $9000 firm; Jim nnn-nnn-nnnn evenings (Lumby BC)

International 254, mid 80’s good condition! 1688 hours, new clutch this year. Fluids have been maintained, tires are in great condition. Price includes a 5ft Rhino SE5 brush hog and rear blade, $5500. I am only selling because I want to go to a finish mower; Darrin nnn-nnn-nnnn (Loomis CA)

International Harvester Manual TD 14, Operator, 104 pages, $20 post paid – TD 14, Large Wall Lube Chart, 4/49, $7.50 pp – UD 18A, Operator, 53 pages, $10 pp – UD 24, Operator, 52 pages, $10 pp – TD 6, Operator, 88 pages, $20 pp – TD 9, Instruction & Parts, 2/40, 72 pages, $20 pp – T 6 & TD 6, Parts, 2/46, 304 pages, $35 pp; Dick Lloyd nnn-nnn-nnnn or xxxx@xxxx.xxx (Lewiston ID)

International parts: Single front wheel and yoke. Fits M and H International. Dual narrow front tires and pedestal also fits M and H International. Both in good shape, $100 each; Tim Crockett nnn-nnn-nnnn (Centralia WA)

International Serial numbers book, including interpretation of prefix letters, 1921 – 1953, $10. Cub, Cub Cadet, and Farmall Cub Model and Serial Number book, 1947 – 1974, $15; Jim Robinett nnn-nnn-nnnn or xxxx@xxxx.xxx (Ontario OR) [box ad]

International TD 9 crawler, 4 roller track frame, beautiful 22 inch pads on wide gauge, no blade or pto. engine is free. good tin $800; David Santoro nnn-nnn-nnnn (Hillsboro OR)

International TD6, rare 1954 orchard model crawler tractor. Has new rings & bearings, new valve job, new paint (5 years ago) and decals. Just had injector pump overhauled. Undercarriage about 70%. Runs great, looks good, has all factory equipment (seat, tool box, etc), $6500 obo; Dale Roth nnn-nnn-nnnn (Crawfordsville OR)

John Deere tractors: AO styled, AO unstyled, LA, 420’s, LA’s, 40’s, 50, MT, 430U and others, price upon request; Len nnn-nnn-nnnn (Abbotsford BC)

John Deere 310 tractor loader backhoe rebuilt engine, good rubber, good farmer machine, $5250 obo; Don Chappell nnn-nnn-nnnn (St Helens OR)

John Deere 420 crawler with hydraulic tilt blade, has reverser, 5 roller undercarriage, track chain like new. Crawler sat for years and steering clutches are stuck, motor will run, does not smoke and has very good oil pressure. Selling as is needing work. Very restorable or use for parts, $2900; Joe Giordano nnn-nnn-nnnn xxxx@xxxx.xxx (Port Orchard WA)

John Deere 420 forklift, $2500; Dave Gallant nnn-nnn-nnnn (Boring OR)

John Deere 420 Highcrop, sn 132818, all redone, like new, $11000 US obo; Len nnn-nnn-nnnn (Abbotsford BC)

John Deere 420 with bucket/loader. Wheel tractor. Not running, forward/reverser, $1500; Dave Gallant nnn-nnn-nnnn (Boring OR)

John Deere 420/440 crawler new brake bands, rear belly pan for the JD 440; Joe Keith nnn-nnn-nnnn (Hermiston OR)

John Deere 50, tricycle front with power steering, runs, has a Yakima hitch, $1600 obo; Delmer Riel nnn-nnn-nnnn (Yakima WA)

John Deere 520 row crop, narrow front, runs but not running now and not stuck, $4000 or trade; Joe Keith nnn-nnn-nnnn (Hermiston OR)

John Deere 60 Orchard, sn 6047277, all redone, like new, $9000 US; Len nnn-nnn-nnnn (Abbotsford BC)

John Deere 60, 1952, parting out nice tractor. Very nice adjustable wide front axle for John Deere 50, 60, 70, 520, 620, 720, 530, 630, 730, A. B, G. Detailed pictures and video available through email. I have many other good parts available as well. Tractor has a bad crankshaft and drive disk. All hydraulics and rear PTU unit are in excellent condition. Radiator, brakes, distributor, etc., are all available and in good cond. No 3 point; Bill Demers nnn-nnn-nnnn or xxxx@xxxx.xxx (Spokane WA)

John Deere A US, 1937. It has been pulling 4 years and is a consistent winner. This tractor has been completely overhauled and enhanced with .125 oversized pistons MW. It pulls with 14-9--38 151 Firestone top cuts and 4-12 on the front. The engine has Murphy roller rockers and 51, G carburetor, hot coil magneto and develops 55 hp on dyno. Has Mark V wheelie bars and weight brackets. Will let some weights go with it. I am quitting Tractor Pulling for health reasons. It's been 16 years of fun A great buy at $6500; Glen nnn-nnn-nnnn or xxxx@xxxx.xxx (Moses Lake WA)

John Deere AOS, 1936, s/n 1035. Tractor is stuck and rough. $2500. Will consider trade for unstyled A or B; Chris nnn-nnn-nnnn or xxxx@xxxx.xxx (Camano Island WA)

John Deere AR, 1936. Has the hard to find F&H round spoke wheels front and rear, missing some parts intake manifold, pistons and rods, valve springs, fenders, nice hood and fuel tank. Pictures on request, $2400 obo; Jerry nnn-nnn-nnnn (John Day OR)

John Deere AR, 1951, Runs good, includes No.5 sickle bar mower $2400 obo; Dave Gallant nnn-nnn-nnnn (Boring OR)

John Deere B late model parts: uncut hood, $80. Rol-O-Matic,$125. Two sets of long rear axles, $150 per set. Two radiators, $60 each; Steve Zane nnn-nnn-nnnn (Paynes Creek CA)

John Deere B, 1938, long frame model, engine rebuilt, good period tires, rear spokes very good unstyled tractor ready for paint, $3500; Don Chappell nnn-nnn-nnnn (St Helens OR)

John Deere B, 1939 parts: head, block, pistons, complete assembly, $500. Complete radiator, $300; Don Chappell nnn-nnn-nnnn (St Helens OR)

John Deere B, 42" rear tires, motor overhauled. Good running tractor, good tin and paint, $2500 obo; Clark Higley nnn-nnn-nnnn (Kimberly ID)

John Deere B, sn 48713, single front, long axles, live hydraulics, rebuilt carburetor mag and generator, new seat, new sealed beam lights, 3 point hitch, paint looks good, very nice tractor, $2250 obo; Rick nnn-nnn-nnnn (Kuna ID)

John Deere BR, 1937 parts tractor, $500; Dave nnn-nnn-nnnn (Boring OR)

John Deere D, 1935, complete, not stuck. Comes with brand new fenders & hood, very nice old '35 D, $2750; Don Chappell nnn-nnn-nnnn (St Helens OR)

John Deere GM, sn 17189, single front, restored about 5 years ago, still looks very good, new tires 13-38, new battery, $4000; Rick nnn-nnn-nnnn (Kuna ID)

John Deere G US, 1941. It has been pulling for 3 years and has had many 1st and 2nd place wins. Pulls 5000-6500 3 and 4 miles per hour. Tractor has been completely rebuilt from front to back. Engine enhancements include Murphy head and manifold, Murphy roller rockers and Shellum DLTX51 carburetor, new valve springs and oversized valves. It pulls on 18-4-38 Firestone 151 top cuts. It is rated at 90 plus HP with .125 oversized MW pistons 12.4- 1 compression with gear drive starter. Great puller. Has Mark V wheelie bars and weight brackets. Buy it for $8500. Will let some weights go with it. I am quitting Tractor Pulling for health reasons. It’s been 16 years of fun; Glen nnn-nnn-nnnn or xxxx@xxxx.xxx (Moses Lake WA)

John Deere GP Standard, 1929. Steel rims with 6” extensions on rear, missing a few cleats, round spoke cutoffs in front, motor is free but missing a few parts, carb parts, seat, valve springs, fenders are a little rough. Hood and gas tank are very nice, magneto has good spark, spindles are excellent, nice tractor to restore, pictures on request, $2500 obo; Jerry nnn-nnn-nnnn (John Day OR)

John Deere GP: Will the party that borrowed the John Deere GP radiator from me please call me as I misplaced your phone number. Thank you, Dave Gallant nnn-nnn-nnnn (Boring OR)

John Deere GW, sn 27686, has very good tires 13-38, new rings, bearings reset, ground valves, rebuilt carburetor mag generator, runs very well, needs paint, $3500 obo; Rick nnn-nnn-nnnn (Kuna ID)

John Deere HN, 1941. New rear tires, $2500. John Deere A, 1952, $1000. John Deere BW, 1947, w/anteater front, $1000. 1949 John Deere R, 1949, project $2500. John Deere AW, 1948, $2500; Chris nnn-nnn-nnnn or xxxx@xxxx.xxx (Camano Island WA)

John Deere L, early, hand start, with bottom sickle mower, engine loose, $1350 obo; Delmer Riel nnn-nnn-nnnn (Yakima WA)

John Deere M, restored in 2000 & 2001. Good tires. Been parked since restored, $2500; Eldon nnn-nnn-nnnn (Goldendale WA)

John Deere MT starter, rebuilt, sn 1107064-(IF5), $175 obo; Clark Higley nnn-nnn-nnnn (Kimberly ID)

John Deere parts: Behlen power steering with pump for John Deere steering shaft; early PTO for John Deere D shaft is outside case AD350R; DLTX 3 brass carburetor; radiator curtain for D shutters for 38 A; fuel tanks B A AR D; radiator for D; bolt-on hubs rear wheels, 10 and 12 spline B, 15 spline A, 12 spline G; smooth back cover for A and B; Rick nnn-nnn-nnnn (Kuna ID)

Magneto books: Fairbanks Morse, Fundamentals of Magneto Ignition, $28. International Magnetos Service Manual for International F-4, F-6, E4A, and H-1, Wico “H”, “AH”, “EK”, AP” and Splitdorf (Dixie and Aero), $32; Jim Robinett nnn-nnn-nnnn or xxxx@xxxx.xxx (Ontario OR) [box ad]

Magnetos: 10 mags, 4-cylinder type. Different makes, all good, $500; Joe Salazar nnn-nnn-nnnn (Albuquerque NM)

Massey Ferguson 811 skid steer loader, hydro with good running Perkins engine, tires need steering adjusted, some work, $2500; Larry nnn-nnn-nnnn (Dorris CA)

Massey Ferguson TO-30, has Davis step-through loader, bucket needs work, real good rear rims/rubber, good sheet metal, motor is missing the head and oil pan. Has the Continental Z129 gas engine. As is $1100; Joe Giordano nnn-nnn-nnnn xxxx@xxxx.xxx (Port Orchard WA)

Massey-Harris Parts Manual for 44, 44K, & L. P. Tractors. Serial Nos. 1001 thru 40000, dated 7/52, 185 pages, cover soiled, $35 post paid. – M-H model 27 Combine, Operators and Maintenance manual, 69 pages, complete but no cover, $20 post paid; Dick Lloyd nnn-nnn-nnnn or xxxx@xxxx.xxx (Lewiston ID)

Minneapolis Moline G1000 Wheatland diesel, 1966, 105HP, 18.4-34 rears, 1100-16 fronts, factory cab with all glass, 4 remotes, amplitorque, good sheet metal, duals, $4495; Ronn Boehlke nnn-nnn-nnnn or nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)

Minneapolis Moline GVI, diesel, 1960, 68HP, 23.1-34 rears, 7.50-18 fronts, cab with all glass, good sheet metal, 2 remotes, with 9ft Cancade snow plow, $3995; Ronn Boehlke nnn-nnn-nnnn or nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)

Minneapolis Moline RTI, 1945. Starter, hyds. Runs but has coolant leak in #3 cyl. Comes with SM side mount mower and rare cast dual rear mounts, original manuals, $900; John Winn nnn-nnn-nnnn (Dallas OR)

Minneapolis Moline ZAN, 1949, not running, engine stuck, mostly complete except missing starter and carburetor, hood has typical rust, needs one rear tire, has two rear wheel weights on each side, parts or possible restoration, as is, $450; Ronn Boehlke nnn-nnn-nnnn or nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)

Oliver 60, 1947. Runs. Tin good. Has good fenders, 3 nearly-new tires, rear wheel weights, lights, new rear engine side panels (fronts missing), $1200; Richard W Johnson nnn-nnn-nnnn (Spokane WA)

Oliver OC3 wide tread, good engine, everything works, $1600; Gene Stuckle nnn-nnn-nnnn (Davenport WA)

Paint: Battleship gray paint for antique Cat, $10 per gallon; nnn-nnn-nnnn or xxxx@xxxx.xxx (Beavercreek OR)

Parting out late styled John Deere A's and B's. John Deere 40U for parts. NOS John Deere A block. A2324R casting number; Chris nnn-nnn-nnnn or xxxx@xxxx.xxx (Camano Island WA)

Tires: Good pair of 18.4x34 rear tractor tires and wheels off of a Oliver 1600, $725 obo; 1 new 12.2x28 rear tire and wheel off of a Ferguson 30, with liquid, $350 obo; have several other tires; Delmer Riel nnn-nnn-nnnn (Yakima WA)

Tires: Two 14.9 – 24 tractor tires, good shape, 80% plus tread, $200 each. Two 24 inch Ford tractor wheels, $150 each; Tim Crockett nnn-nnn-nnnn (Centralia WA)

Tires: two new 11.2-28 6 ply tires and tubes, never mounted, $500; two 16.9-28 8 ply tires, like new, mounted on 28" flat center rims, small center hole, 6 bolt pattern, off a Leland tractor, $750; Larry nnn-nnn-nnnn (Dorris CA)

Wheels: Allis Chalmers G rear wheels (2) to add duals. New condition, $50 each; Tim Crockett nnn-nnn-nnnn (Centralia WA)