September 2015 - Misc. For Sale

All Classified Ads

2000 Charmac 25 ft car hauler, side door, torsion bar axles, ramp rear door, excellent condition, 9800 GVW, 7200 lb load capacity. New base price, $9700. Sell for $4900; Ivar Christenson nnn-nnn-nnnn (Vancouver WA)

2007 Load-Max 32’ trailer including 6’ hydraulic beavertail, twin 3” cylinders. Ramsey winch, running boards and tie downs. This is a very good unit and pulls very nicely, $6500; Russ nnn-nnn-nnnn (Dayton WA)

3-ton bridge crane end trucks, 33 ft max span, capable of being motorized. Never used, new condition, nice, $1000 obo; John nnn-nnn-nnnn (Manning OR)

Air compressor, LeRoi, 1979, powered by a Perkins 4 cyl diesel, runs great, 125 cfm, 150 psi working pressure, $1200; Jimmy Clayton nnn-nnn-nnnn (Lincoln CA)

Aultman Taylor Starved Rooster watch Fob. Mint condition, never worn, includes strap. I won't take one nickel more than $235 obro; Garland nnn-nnn-nnnn (Port Townsend WA)

Backhoe attachment for Skid-Steer loader (Bobcat), 8-way hydraulics action. Made by Case, Model 100, $2100; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT) Backhoe attachment for Skid-Steer loader (Bobcat), model 909, 8-way hydraulics action. $4900; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Backhoe attachment for Skid-Steer loader (Bobcat), 8-way hydraulics action. Made by Case, model 100, $2100. Backhoe attachment for Skid-Steer loader (Bobcat), model 909, 8-way hydraulics action, $4900; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Baler: Case Stationary baler, 1943. Excellent condition, new paint, not a rusty yard ornament! Works well, new battery & tires, Wisconsin engine. We are no longer baling hay. $1500 obo. Can send pics to your email; Spokane Valley Museum nnn-nnn-nnnn (Spokane Valley WA)

Baler: Vermeer 605F baler wide belt, $1200; Perry nnn-nnn-nnnn (Noonan ND)

Boom 3 pt for tractor, make offer; John Evers nnn-nnn-nnnn (Dallas OR)

Camper: Sears Ted Williams Camper, "TENT" trailer. It was first sold in 1964. We have owned it since about 1977. The unladen weight is 460 lbs. There is some rust and all three tires hold air but are not roadworthy. The tent part is only good to use as a pattern for a new one. There are several clubs that specialize in vintage campers. Asking price is $650 as is, cash only. Hauling is buyer's responsibility; Fred Alexis nnn-nnn-nnnn (La Grande OR)

Carburetors: One Tillotson YC10A, $45. One Zenith 13733-12638L, $45; William Henderson nnn-nnn-nnnn (Sheridan OR)

Chain saw: I.E.L. 1944 "L" 8 hp 2-man chainsaw. 4 ft bar, raker chain, no rust or corrosion, missing a few small parts, $1000 obo; John nnn-nnn-nnnn (Manning OR)

Champion spark plug cleaner, $75; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Chrysler Industrial 6 cylinder flathead engine from a Massey Ferguson combine, $400 or good offer; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Collection of original Caterpillar Manuals: early Cat equipment including dozers, graders, loaders, scrapers and others. Approximately 170 books. Would like to sell as a set but may sell individually @ $25 each. Will entertain offers as a collection; Don Chappell nnn-nnn-nnnn (St Helens OR)

Combine: John Deere No.25 Combine. 6. Engine powered. Bad engine, needs canvas. Decent original, but needs to go, $250; John nnn-nnn-nnnn (Dallas OR)

Corn-thrasher wagon: 4 wheel wagon, will make good yard-art. Can send pictures, $250; Ron nnn-nnn-nnnn or xxxx@xxxx.xxx (Auburn CA)

Cultivator: B235 two-row cultivator for B or BN Farmall, $450 obo; Wendell Newman nnn-nnn-nnnn (Carson City NV)

David Bradley two-bottom plow on rubber. Previously listed at too high a price. Took another look at it, and decided $100 obo. Can help load; Jon Rodgers nnn-nnn-nnnn or xxxx@xxxx.xxx (Sonora CA)

Dearborn plow, 2x16’, 3 pt, good condition, $125; John Evers nnn-nnn-nnnn (Dallas OR)

Dentist chair, antique. Good hydraulics, foot rest is missing, needs upholstering, $300; Tom nnn-nnn-nnnn (Helendale CA)

Disc: 6 ft 3 point disc, excellent condition, $400; Rod Hisken nnn-nnn-nnnn (Oregon House CA)

Fairbanks Morse Hammermill, #35, complete, $800 obo; Jimmy Clayton nnn-nnn-nnnn (Lincoln CA)

Fan: forge fan, Climax by Buffalo Forge Company, NY. Stand on 3 legs, $200; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Fordson F Detroit Jr. belly mount mower. Complete. The must have for the true Fordson collector! Open to reasonable offers; Jon Nessel nnn-nnn-nnnn (Chilliwack BC)

Forge Fan, Climax by Buffalo Forge Company, NY. Stand on 3 legs. $200; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Forklifts: have two. One Philift ranch forklift, pneumatic tires, dual wheels, 4000 lb capacity. Excellent condition, $5250. One Clark forklift, pneumatic tires, dual wheels, 15000 lb capacity, excellent condition, $8500; Rich nnn-nnn-nnnn (San Jose CA)

Front cultivator units from 1949 Farmall Cub. Good condition but rusty. $50 picked up in Vancouver, WA; Bob Williams nnn-nnn-nnnn or xxxx@xxxx.xxx (Vancouver WA)

Fuel tank, 500 gallon, no stand, $150; Dave Gallant nnn-nnn-nnnn (Boring OR)

G & B gas cart T-57 and Wayne 276 5 gal gas pump restorable condition. Can send pics, $1200 for both; Mike Stafford nnn-nnn-nnnn or xxxx@xxxx.xxx (Petaluma CA)

Gates: metal gate, 16 foot, co-op with minor damage, $75. Metal gate, 12 foot Cenex with minor damage, $40; John Evers nnn-nnn-nnnn (Dallas OR)

Generator: Kohler generator, old, motor is stuck, three old Dillon chain winches, small cultivator looks like it would fit behind a garden tractor, two old cast iron wheels that have "Universal" cast on them, look like they came off of a garden tractor. Call for more info and pictures; Jerry 541-575 0866 (John Day OR)

Grain drill: like new used Minneapolis Moline grain drill with seed attachment, model P3-6, 10 ft wide, on rubber. Galvanized see boxes doublE disc drops 6" centers on drops. Seed cover chains behind each boot, $1500; Bud nnn-nnn-nnnn (Grants Pass OR)

Grizzly drill press, Grizzly 6” belt / 12” disk bench sander, Delta 15” professional wood planer with rolling stand, numerous case tools- Dewalt /Milwaukee / Bosch drills, hammer drill, grinder, sanders, planers, air tools, Dewalt air compressor, Rolling tool chest w/tools, paint guns, Pump jacks, foot pedal grinding stone, wheelbarrow and lots more; Jeff Hunter nnn-nnn-nnnn or xxxx@xxxx.xxx (Santa Cruz CA)

Hammer Mill: Montgomery Ward. Early 1930's. 16 blades, 5 screens. In good condition. Feeds from top hopper or side tray, $350; Richard Hanna nnn-nnn-nnnn (Hayden ID)

Hires Root Beer cooler, complete. Bottle rack type with 25 cent coin operated machine, $300; Les Wallace nnn-nnn-nnnn or nnn-nnn-nnnn (Oak Grove OR)

Horse drawn mower: John Deere Big No. 5, complete. In good condition. Last used to cut road right-of-way, pulled behind a tractor in 2003, $250; Richard Hanna nnn-nnn-nnnn (Hayden ID)

Implements: 6 foot, 3 pt hitch, box blade $500; 8 foot pull disc, 4 gang, $600; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)

Iron wheel wagon, heavy duty. Used as a compressor wagon. Has center point steering with an iron tongue. Will make a good hay wagon, engine wagon, etc. Can send pictures, $500; Ron nnn-nnn-nnnn or xxxx@xxxx.xxx (Auburn CA)

Iron wheels and axles. King pin front steer axle. Heavy duty - will support 20 hp engines plus. Wheel diameter rear approx. 42", front 36". Can send pictures, $500; Ron nnn-nnn-nnnn or xxxx@xxxx.xxx (Auburn CA)

John Deere killefer, one-shank ripper, trip type, $250; Richard Hoagland nnn-nnn-nnnn (Elk Grove CA)

John Deere pressure washer, Model A40 on original cart, 3HP electric Leeson motor frame G184T continuous duty $200; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Knickerbocker S3 1/2 cement mixer, 1917-27?? Was sold new with 1-1/2 hp economy hit & miss? NO engine! Very restorable condition. Approx 1100-1200 lbs; needs new tires to tow, $400. E-for more photos; Clay Shorten nnn-nnn-nnnn (Newberg OR)

Lathes: 2 metal lathes, a Sheldon 12 inch, motorized, has quick change gears, also another lathe with a 20 ft bed marked: Putnam Machine Co., Fitchberg, Mass. Not much in the way of tooling for either one. Any reasonable offer considered!; Judith Jones nnn-nnn-nnnn or xxxx@xxxx.xxx (Sonoma CA)

LeTourneau dirt scraper, small size, goes behind Cat D4, cable controlled, $1000; Keith Clark nnn-nnn-nnnn (Spokane WA)

LeTourneau steel wheeled pull-type ripper as would go on back of Cat D8, cable lift, $2500; Keith Clark nnn-nnn-nnnn (Spokane WA)

Letz Corn Grinder, older restoration; Jeff Hunter nnn-nnn-nnnn or xxxx@xxxx.xxx (Santa Cruz CA)

Lewis Power Saw Winch (no saw) with 250 feet of 3/16 cable with hook and anchor tree strap. One hundred feet of 3/16 additional cable and storage box. Asking $450. Can see one in use on Google by typing Lewis Power Saw Winch. You transport; Lynn nnn-nnn-nnnn or nnn-nnn-nnnn (Philomath OR)

Log arch, good condition, 7 ft steel wheeled, cable controlled, $2500; Keith Clark nnn-nnn-nnnn (Spokane WA)

Lots of old steel spoke wheels both farm and implement. Very old, various prices; Joe nnn-nnn-nnnn (Port Orchard WA)

McCormick-Deering alfalfa cutter, antique, horse drawn, $500; Tom nnn-nnn-nnnn (Helendale CA)

Misc: 2-bottom plows, old rakes, mower side delivery; CW Wallace nnn-nnn-nnnn (Toledo WA)

Misc: Feed store scale, buzz saw and 2 sharp blades. Luggage cart, and extra hardware for building a second. Maytag washer. Make a reasonable offer on all; Ruth Walker nnn-nnn-nnnn or nnn-nnn-nnnn (Chewelah WA)

Mower: Farmall Cub sickle bar mower, needs pitman arm stick, $75 ; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Mower: John Deere LA sickle bar mower with extra bar, $300; Don Chappell nnn-nnn-nnnn (St Helens OR)

Old reel rotary "Briggs" lawn mower, wood handled; Brian Christen nnn-nnn-nnnn or xxxx@xxxx.xxx (Bend OR)

Old Wayne 60 art deco gas pump, probably 30s/40s era, needs restored, needs some parts but very neat old looking pump and if restored would be beautiful, $1900. Also have a really nice solid pre visible Boyle Dayton gas pump, 1920s era, very solid nice looking pump with all the name plates, needs bottom sheet metal, real nice looking and good paint. Stands about 10 feet tall, $2000. Also have a visible pump missing the glass, they are available online, needs other small parts but has good frame and sheet metal, with top bonnet, stands about 10 feet tall, $1500. Have pics of any. Need to downsize some; Joe Giordano nnn-nnn-nnnn (Port Orchard WA)

Outboard motors: Have around 10 motors, make offer; Warren Roberts nnn-nnn-nnnn (Chehalis WA)

Plows: John Deere 1-bottom with mounting brackets for L / LA, $125. Farmall Cub complete 2-way, $150. Avery V plow $100. John Deere 680 6-16 pull plow Big beam correct for 830s, need some work, $800; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Pond saw bar, 8 ft long, 5/16" thick, 8-1/2" wide center, 4-1/4" wide ends, 8 holes each end, $250 obo; John nnn-nnn-nnnn (Manning OR)

Pressure washer: John Deere pressure washer, Model A40 on original cart, 3 hp electric Leeson motor frame G184T continuous duty, $200; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Professional hot water power sprayers on wheels. Burns propane, needs some work, $75; Wendell Newman nnn-nnn-nnnn (Carson City NV)

Pull disc - 5x5 International. Good condition. Can send pictures, $250; Ron nnn-nnn-nnnn or xxxx@xxxx.xxx (Auburn CA)

Quonset hut: New never been erected Quonset hut building. Miracle Span 66 feet X 25 feet X 12 high. Always stored inside. Building plans included. No ends. Has all bolts and caulking. Heavy metal; Dale Longhurst nnn-nnn-nnnn (Delta UT)

Rail: Heavy Ore-car rail, approximately 200 feet +. Can send pictures, $1.00/ft.; Ron nnn-nnn-nnnn or xxxx@xxxx.xxx (Auburn CA)

Rear lift attachments for Farmall Super A, $50; Wendell Newman nnn-nnn-nnnn (Carson City NV)

Rock crusher, Golden State: Heavy duty. 8x8 jaw type. Made in San Francisco in late 1800's. Can send pictures, $3000; Ron nnn-nnn-nnnn or xxxx@xxxx.xxx (Auburn CA)

Samson Assay Crusher - hand crank model. 3x3 jaw type. Early 1900's. Excellent condition. This model is hard to find. Can send pictures, $2500; Ron nnn-nnn-nnnn or xxxx@xxxx.xxx (Auburn CA)

Sand blaster: like new, comes with nozzle and mask and connectors, $100; Lon Sisson nnn-nnn-nnnn (Rohnert Park CA)

Scythe, 70 years old, excellent condition, used very little, $125; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Scythe, 70 years old, excellent condition, used very little, $125; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Sickle mower: Jari 30", new engine; Al nnn-nnn-nnnn (Elko NV)

Single row finger weeder. Might be a Buddingh, but not labeled. Have seen pictures of it under a Cub or AC-G; Mike nnn-nnn-nnnn (Puyallup WA)

Stamp-Mill parts: stamps and rods from 2-stamp mill. Also some raster-stand pieces and parts. Can send pictures; Ron nnn-nnn-nnnn or xxxx@xxxx.xxx (Auburn CA)

Tire: 750-17” Radial tube Michelin, Load Range D, 85% tread, $50; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Tire: 750-17” Radial tube Michelin, Load Range D, 85% tread, $50; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Tires: 2x 13.6”-26” on flat spoke rims with 6 hole bolt pattern, $200 each; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Tires: 2x 13.6”-26” on flat spoke rims with 6 hole bolt pattern, $200 each. Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Tires: 2x 13.6-28”, 40% tread. $100 each; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Tires: 2x 13.6-28”, 40% tread. $100 each; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Tires: 4 new take off 750 X 16 bias tires, great for a trailer, $75 apiece; Dale Longhurst nnn-nnn-nnnn (Delta UT)

Tires: Four 14x24 12 ply Goodyear grader recaps, 1.5" tread depth, good sidewalls, on 12 lug wheels, 14" centers, all four $900; Ivar Christenson nnn-nnn-nnnn (Vancouver WA)

Tool box: Pro-Tech brand aluminum pickup tool box. 60" wide, 24" deep, 19-1/2" high. Smooth sides, diamond tread top. Sliding tray with several dividers and lights. Don't think you'll find a better quality or nicer looking one. New price was $830, asking $500; Lee nnn-nnn-nnnn (Crawfordsville OR)

Topeka Highway sickle mower, factory, looks like 40 Ford, running gear; CW Wallace nnn-nnn-nnnn (Toledo WA)

Utility cart. 48 volt. 3 years old. Pipe rack. Runs good. Good tires. Manufacturer-club car, $3000; Tom nnn-nnn-nnnn (Helendale CA)

Versatile 400 swather, 19 ft, big tires, $2000; Perry nnn-nnn-nnnn (Noonan ND)

Victor 100 oxy acetylene cutting and welding outfit with medium size owner tanks, almost full, on cart, $300; Also another Victor outfit for $85; Warren Roberts nnn-nnn-nnnn (Chehalis WA)

Wade drag saw wood frame, should run, pick up only. Can email pics, $350; Jack Maki nnn-nnn-nnnn or xxxx@xxxx.xxx (Colville WA)

Wagon wheels: Two wooden steel-rimed wagon wheels very good condition. Can email pic. Pick up only, $300 for both; Jack Maki nnn-nnn-nnnn (Colville WA)

Water pump: Deming #6. Double V-belt pulley, $150; Richard Hanna nnn-nnn-nnnn (Hayden ID)

Water Rams: Have 8 or 10 water rams, come by and make an offer; Warren Roberts nnn-nnn-nnnn (Chehalis WA)

Water/fuel tank, oval shape, 3 compartment unit with vented lids. Approximately 500 gal capacity. Used as fuel tank in later 30's-40's. Mounted on sub-frame to go on truck or wagon. Can send pictures, $500; Ron nnn-nnn-nnnn or xxxx@xxxx.xxx (Auburn CA)

Welder, Miller 225G, Bobcat-CC/CV-AC/DC-Onan. 16XSL. Engine stored in shed, not used for 13 years, $500; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Welder, Miller 225G, Bobcat-CC/CV-AC/DC-Onan. 16XSL. Engine stored in shed, not used for 13 years, $500; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Windmill: Monitor Model L 10' diameter wooden wheel windmill. Just restored. Needs a tower, and new owner. Email for photos and price; Garland nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Townsend WA)

Yard art: John Deere manure spreader, yard art, $200. Hay rake on steel wheels, $150. Grain drill, 8 ft on steel wheels, $175. Old drum for logging, 16"x24", $175. Other yard art available; Jerry VanDeWalle nnn-nnn-nnnn (Yamhill OR)