13.6/12x38 Slip/clamp on duals, belly pump, front bolster for Farmall M, $200 for all; Russ Shorten nnn-nnn-nnnn or nnn-nnn-nnnn (Dayton WA)
Allis Chalmers B, 1950, parade ready. Rebuilt engine, many seals and bearings replaced, like new tires, new wiring, new paint and decals. Call or email for more information or pictures, $3500; Dennis Kytola nnn-nnn-nnnn or xxxx@xxxx.xxx (Ridgefield WA)
Allis Chalmers B, complete tin & hydraulics; Delmer Riel nnn-nnn-nnnn (Yakima WA)
Allis Chalmers C, runs. Good tires, hand brakes, $1000 obo; Carol Fairbairn nnn-nnn-nnnn (Turlock CA)
Allis Chalmers D 12 Collector tractor with sickle mower, all original, runs very well, $4500 obo; Jerry nnn-nnn-nnnn (Gaston OR)
Allis Chalmers G with hydraulic cultivators, new tires on rear, $3650; Jerry nnn-nnn-nnnn (Gaston OR)
Allis Chalmers G, 1948, partially complete. New tires, rebuilt generator, transmission, distributor, starter. Have fenders & hood, some extras, $3000; Jim Martin nnn-nnn-nnnn (Seatac WA)
Allis Chalmers H-D7 crawler with blade, 1948. 371 Detroit diesel. Original, low hours. Undercarriage very good. Runs good, just quit steering. More photos available, $2200; Steve Hegdal nnn-nnn-nnnn or xxxx@xxxx.xxx (Weston OR)
Allis Chalmers WC, 1937, loose with style kit, $500. Allis Chalmers WC, 1940, stuck, mostly complete, $500. Miscellaneous Allis Chalmers parts,$100. Or, take tractors and parts for $1050; Larry nnn-nnn-nnnn (Klamath Falls OR)
Allis Chambers B, 1937, hand crank only. Has rare front axle weight. Good rear tires, $750; Matt Little nnn-nnn-nnnn (Harrison ID)
Avery A radiators, two, $75 each + shipping; Garland nnn-nnn-nnnn (Port Townsend WA)
Back blade for Farmall Cub with fast hitch, 5 ft adjustable factory built blade that came off a Cub with fast hitch, $150; Lee Dotson nnn-nnn-nnnn or xxxx@xxxx.xxx (Satsop WA)
Bull gear for John Deere 420 crawler, $125, have lots of other misc parts for two cylinder crawlers. Starters, generators, idlers, etc; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
Carburetor for H-JD, Ford-A and other makes; Clifford M Wade nnn-nnn-nnnn (Willows CA)
Case 300 round nose, very nice unrestored tractor complete with Eagle hitch, $1475 obo; Don Chappell nnn-nnn-nnnn (St Helens OR)
Case 430 gas industrial tractor comes with side mount brush hog and opposite side hyd tank and counter weight. Used for mowing shoulders on roads. Good tires and paint. Runs and operates well, $3975 obo, some trades? Don Chappell nnn-nnn-nnnn (St Helens OR)
Case 530 CK diesel loader tractor. 1964, 8 speed transmission w/ Casomatic. Power steering, 3 pt draft control w/rear box scraper. Good tires w/rear wts. Starts and runs good. Pictures available, $5500; Dick Benson nnn-nnn-nnnn or xxxx@xxxx.xxx (Grants Pass OR)
Case C, parting out Case C, call with needs; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Case C, S or R F&H hc245 rear round spoke wheels 9x24, very nice and rare, $400; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Case D parts: manifold, valve cover, radiator cap & misc. Call for details; Lon Sisson nnn-nnn-nnnn or nnn-nnn-nnnn (Rohnert Park CA)
Case D, 1952, factory propane. One of very few built. Would be a good tractor for a restoration, $1500; Steve Stevens nnn-nnn-nnnn (Medical Lake WA)
Case DO, nice running, 1948, new rear tires, good paint, $1175 firm; Bud Combe nnn-nnn-nnnn (Grants Pass OR)
Case parts VAC, SO and 500D 6 cyl diesel. Engine parts, including SO and VAC block, pistons, cranks, heads, manifolds, air cleaner for 500, brake parts, clutch, flywheel and pressure plates. Hoods, fenders and much more. Call with your needs; Dick Benson nnn-nnn-nnnn or xxxx@xxxx.xxx (Grants Pass OR)
Case R, 1939. Runs, good oil pressure, tin OK, tires poor, needs some tlc, $750; Dave nnn-nnn-nnnn (Boring OR)
Case SC wide front, 1946. Complete running and driving tractor. ALWAYS fires up! Has been completely gone through by previous owner, paint faded and cracked, great rear tires fronts are car tires. Has aftermarket hydraulic pump and rear remote, $1800; Chip nnn-nnn-nnnn (Mattawa WA)
Case SC, 1952. Painted Case two tone colors. Like new rubber, clean fuel tank. Starts and runs well. Sharp looking tractor, $2000; Dave nnn-nnn-nnnn. Please leave message. (Silverton OR)
Case VAC, 1950, new single front tire, matched 80% rear Firestone tires. Eagle hitch, 3 pt, PTO. Runs good, $950; Bud Combe nnn-nnn-nnnn (Grants Pass OR)
Case VAI, 1947. Did run. Engine is free. Tires hold air but are poor tread. Rear weights, PTO. No three point. Needs a little work and it will run. Pictures available, $350; Dick Benson nnn-nnn-nnnn or xxxx@xxxx.xxx (Grants Pass OR)
Caterpillar 10 & 15 gas tanks; Don Chappell nnn-nnn-nnnn (St Helens OR)
Caterpillar 22, 1937, sn 1J1470WSP, wide gauge, tracks in good condition, seat in good condition, runs good, original condition, crawler only had 2 owners rancher and me, located in Minden Nevada, $2800 obo; Tim Totaro nnn-nnn-nnnn (Minden NV)
Caterpillar D2 5J series wide gauge tractor. Runs good, has a hydraulic bulldozer blade, brand unknown. Undercarriage fair. Located in Eureka NV, $2500 obo; Mr. Kim Kestler nnn-nnn-nnnn (Reno NV)
Caterpillar D2 pto unit with control & coupler parts, $300; Jerry VanDeWalle nnn-nnn-nnnn (Yamhill OR)
Caterpillar D7 3T series, 1948. Runs very good. Has electric start pony which runs well. Has hydraulic assist steering, and forward/reverse lever. Undercarriage is good, grousers are a little low. Tractor is bare, no attachments, $3500 obo; Mr. Kim Kestler nnn-nnn-nnnn (Reno NV)
Caterpillar direct start D2 dozer with working Hyster winch and Cat dozer blade. Runs good, needs one steering clutch fixed and wiring for glow plugs fixed. $4000 as is or $4400 with steering clutch fixed; Tim Bynum nnn-nnn-nnnn or xxxx@xxxx.xxx (Yreka CA)
Caterpillar large hydraulic rams (2) from a D4-7U front loader. Both for $95. Photo available by email; Ron nnn-nnn-nnnn or xxxx@xxxx.xxx (Shingletown CA)
Caterpillar R2 6J wide gauge 1938. Isaacson hydraulic blade. Hyster winch. Undercarriage shot, motor stuck, $1500; Richard Bombard nnn-nnn-nnnn (Auburn WA)
Caterpillar split head Thirty radiator tanks and core, make offer; Don Decker nnn-nnn-nnnn or xxxx@xxxx.xxx (Ridgecrest CA)
Caterpillar Thirty tail seat tractor, nearly complete not stuck; Don Decker nnn-nnn-nnnn or xxxx@xxxx.xxx (Ridgecrest CA)
Centaur KV. 1948. Looks and runs very nice. 4 cyl Le Roi engine / 4 speed transmission. Has mounted vacuum lift sickle mower. Was property of Ohio state and used for road side mowing, $1200; Dave Pembroke nnn-nnn-nnnn Please leave message (Silverton OR)
Cletrac fuel tank. Will fit Avery, Wards Twin Row, Minneapolis BF, no holes; Garland nnn-nnn-nnnn (Port Townsend WA)
Cockshutt 30 wide front tractor. Has under drive option, $1100; Matt Little nnn-nnn-nnnn (Harrison ID)
Collection of original Caterpillar Manuals for early Cat equipment including dozers, graders, loaders, scrapers and others. Approximately 170 books. Would like to sell as a set but may sell individually @ $25.00 each. Will entertain offers as a collection; Don Chappell nnn-nnn-nnnn (St Helens OR)
Co-op E3, 1949, with wide front end. Good tires, good tin, new water pump, rebuilt carb starter & generator, $1650; Delmer Riel nnn-nnn-nnnn (Yakima WA)
Empire, 1948, a true orphan tractor, these tractors were built after WWII using Willys jeep drivetrains. The engine in this tractor is not original, but is a professionally rebuilt counterbalanced flathead 4 Jeep engine. All electrical has been converted to 12v (including the starter). This would make a great tractor drive tractor as it easily does 20 mph before the tire balance comes into play. $3500 obo; George Best nnn-nnn-nnnn or xxxx@xxxx.xxx (Beaverton OR)
Ensign carbs for Cat 20, 30 all rebuilt, $450. D2-D6 battery box covers with thumb screws, $80. D4 engine side panels, $195 per pair new. D2 track adjuster covers, new, $450 pair; nnn-nnn-nnnn or xxxx@xxxx.xxx (Beavercreek OR)
Farmall 140 tractor with hydraulics, $1200; Jerry nnn-nnn-nnnn (Gaston OR)
Farmall 200 with equipment, hoods and grills for H Farmalls, $25 each. Tractor fender radio, $95. IHC carbs, generators, starters, and mags, many misc. IH parts; Fred Gilbertson nnn-nnn-nnnn or xxxx@xxxx.xxx (Creswell OR)
Farmall A, comes with sickle bar mower, plow, other attachments. Very nice condition, $1450 obo; Don Chappell nnn-nnn-nnnn (St Helens OR)
Farmall A, restore or parts, $500; Wendell Newman nnn-nnn-nnnn (Carson City NV)
Farmall and International tractor parts for M, H, C, B, A & Cub. Tell me what you need; Wendell Newman nnn-nnn-nnnn or xxxx@xxxx.xxx (Carson City NV)
Farmall B, 1940, big C-123 engine, new muffler & weather cap, air cleaner, new radiator cap, breather cap, gas cap, new throttle. 3 new tires, new sealed beam headlights, new emblem on front, new seat, steering wheel, regulator, tool box, swing draw bar, PTO guard. Rear wheel weights, new battery box, engine temp gauges. Cream puff has belt guard, everything. Worth it all, $1495; Roger nnn-nnn-nnnn (Redding CA)
Farmall C rims: Two rear 9"X36" rims, good useable condition, $150 ea. or both for $250; Dennis Kytola nnn-nnn-nnnn or xxxx@xxxx.xxx (Ridgefield WA)
Farmall Cub mag, reconditioned, like new, $125 obo; Lon Sisson nnn-nnn-nnnn or nnn-nnn-nnnn (Rohnert Park CA)
Farmall Cub with implements and parts. Mid restoration, $2000; Carol Fairbairn nnn-nnn-nnnn (Turlock CA)
Farmall Cub, 1950. Very unique with custom hydraulic belly blade and ripper bar. Very straight. Good for landscaping or corral, $2450; Wendell Newman nnn-nnn-nnnn (Carson City NV)
Farmall Cub, 1956, with rare speed reducer and 30" tiller. I purchased tractor with plan of fixing it up, but back surgery has changed plans. Tractor runs but does need wiring repair, $1800; Lee Dotson nnn-nnn-nnnn (Satsop WA)
Farmall Decals. Complete sets of the correct decals for the Regular, F-20, F-30, F-12 and F-14. Partial sets for the W-series, O-series, and T-series. These are commercial grade vinyl decals with a UV protective coating. Pictures available by email. Complete sets start at $58; Bob Currie nnn-nnn-nnnn or xxxx@xxxx.xxx (Greenwood CA)
Farmall F 20 1934 wide axel, starts in 2 pulls. New paint, has belt pulley, PTO, individual breaks, and automatic brakes. Starts and runs good; Ray Sales nnn-nnn-nnnn (Boise ID)
Farmall H with loader and bottom blade, runs, $1600; Delmer Riel nnn-nnn-nnnn (Yakima WA)
Farmall H, 1940, sn 49095. Very complete and good tin. Tires ok, engine stuck, $1100; Wendell Newman nnn-nnn-nnnn (Carson City NV)
Farmall live hydraulic pump from a 300 lg. Fast hitch drawbar large, misc parts; Al nnn-nnn-nnnn (Elko NV)
Farmall M 1944, new paint, engine overhauled, 12volt system, front and rear lights, 3 point hitch prefabricated, manure loader prefabricated runs great. If you would like to see a picture email me; Ray Sales nnn-nnn-nnnn or xxxx@xxxx.xxx (Boise ID)
Farmall rims (4), 38"x10" had slight rust but removed & sealed, $60 each; Delmer Riel nnn-nnn-nnnn (Yakima WA)
Farmall sheet metal from A to 450 plus a bunch of misc parts; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Farmall Super A parts & sickle bar mower, $275; Don Chappell nnn-nnn-nnnn (St Helens OR)
Farmall Super A, 1947, runs, good tires, extra grill, $1250 obo; Carol Fairbairn nnn-nnn-nnnn (Turlock CA)
Farmall Super C row crop front w/hyd blade. Could be made into a loader. Runs well, $1100 or reasonable offer; Garland nnn-nnn-nnnn (Port Townsend WA)
Farmall Super H, 1954, new paint, vinyl decals, new sleeves & pistons, new head, 13.6x38 rear tires; Al Barkl nnn-nnn-nnnn (Elko NV)
Farmall Super M motor stuck, great project, $700; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Farmall Super M, 1953, comes with Farmhand F-11 & field chains; Al Barkl nnn-nnn-nnnn (Elko NV)
Farmall Super M, 1953, with F-11 Farmhand with rear field chains; Al Barkl nnn-nnn-nnnn (Elko NV)
Farmall Super M, 1954, all Z castings, front & rear weights, NOS piston & sleeve set installed, new head, everything else original, very nice paint & decals 2 years old. IH muffler, belt pulley, rear remote hydraulic valve; Al Barkl nnn-nnn-nnnn (Elko NV)
Fender weights, 300 lb each or better, bolts on like fenders. Came off Ford 851. Will fit Massey & others, both for $150 obo; Lon Sisson nnn-nnn-nnnn or nnn-nnn-nnnn (Rohnert Park CA)
Ferguson TO-30 project or parts. Engine is loose, have extra tin. No wheels or weights, $350. Can help load; Jon Rodgers nnn-nnn-nnnn or xxxx@xxxx.xxx (Sonora CA)
Ford 2N, runs good, 3pt works well, near new tires front and rear, tin good and straight, nice paint, has new back blade, $2750; Larry Manley nnn-nnn-nnnn (Dorris CA)
Ford 3500 back hoe, 1970, with bucket, works good, $3400; Don nnn-nnn-nnnn (Klamath Falls OR)
Ford 600 & 800 series tractors, running and ready for work; Buck Charles nnn-nnn-nnnn or nnn-nnn-nnnn (Ellensburg WA)
Ford 800 Series, 1958, very good condition, like new rear tires, $3750; Jerry nnn-nnn-nnnn (Gaston OR)
Ford 800, needs work; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
Ford 9N, 1941, in great working condition, $3000; nnn-nnn-nnnn (Philomath OR)
Ford 9N, runs great and strong, good clean condition with PTO and three different 3 point attachments: box scraper, brand new post hole auger and fork lift attachments. Tractor $2700, scraper $350, post hole auger $550, fork lift attachment $200, $3800 takes all. Do not want to separate; Daniel Prekker nnn-nnn-nnnn or xxxx@xxxx.xxx (Sant Ynez CA)
Ford 9N's two with loose engines. One is a cut down for vineyard work, $400 each. Can help load; Jon Rodgers nnn-nnn-nnnn or xxxx@xxxx.xxx (Sonora CA)
Ford Funk Conversion 8N Ford tractor with OHV Ford 6 cylinder. All original with aux, gas tank and air cleaner. I drove it off the trailer about 7 years ago, and have not moved it since, nor have I started it. Too many projects. Needs to go to a good home. Good solid sheet metal, $3600. Local pick up only. Email for images; John nnn-nnn-nnnn or xxxx@xxxx.xxx (Located west of Missoula MT)
Ford gear down transmission. Made by Everett Trenching Co of Los Angeles. Same as Sherman. Fits Jubilee, NAA, 600, 800, 900. Came off of 820 5-speed, $400; Aubrey Greer nnn-nnn-nnnn (Lompoc CA) [corrected contact]
Ford Jubilee, 1953. Runs well, no smoke. All cylinders 100# compression. Has a rebuilt carb, starter & generator. Needs a new clutch (stuck & adj left). All tires serviceable. Front 6.00x16, rear 13.6x28 on 12-28 rims. Rear tires calcium filled, rims are okay. $600 as is. With some TLC it could be a worker. I need a L/H rear 11.2x28 tire & rim for an 8N. Would take as partial trade on Jubilee; Bill nnn-nnn-nnnn (lv msg) (Centralia WA)
Fordson F rear fenders with tool box, very nice condition, $400. Rear wheels, nice lugs and good condition, $150. Front wheels in great condition, $100; Mike Tyler nnn-nnn-nnnn (Moore MT)
Fordson Trackson crawler, 1927, all complete with great paint, owned over 25 years, was running great when stored, price reduced to $5900 obo; Mike Tyler nnn-nnn-nnnn (Moore MT)
Fordson tractors: Would like to trim down my Fordson collection. I have about 9 of them ranging from parts tractors to complete tractors in various conditions. Some on steel, some on cutdowns, some with Hamilton transmissions, one with a Hyster double drum winch. Most are $800 to $2000 range; George Best nnn-nnn-nnnn or xxxx@xxxx.xxx (Beaverton OR)
Harris Power Horse complete with hyd. blade and gearmatic winch. Call for price; Don Chappell nnn-nnn-nnnn (St Helens OR)
Harris Power Horse, 4 wheel drive, new paint, looks sharp, 2 new tires, other tires very good. 6-cylinder gas engine, $6,500, offer or may trade; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
International 350 Hi-Utility fast hitch 1 remote runs, $1500; Mark Parker nnn-nnn-nnnn (Lebanon OR)
International 560 Wheatland Diesel. Good running tractor. Rear tires are weathered but in decent shape. Sheet metal is pretty nice over all. One batter cover is bent. Has single remote and PTO, $4000; Chris nnn-nnn-nnnn (Camano Island WA)
International Cub Low-Boy, 1955. Runs good, looks good. Has fast hitch system, 12 volt electrical. Tires are like new on the front, approx. 70% on the rear. I don’t think you’ll find a much nicer one, $2995; Lee nnn-nnn-nnnn (Crawfordsville OR)
International Harvester Farmall, 1953. Completely restored and finished in Farmall Red! This absolutely stunning tractor has won several parade awards in the past. I purchased it in 2007 with the intentions of starting an antique tractor collection. Shortly thereafter, I purchased a large ranch and just have not had the time to add to the collection or enjoy the Farmall. It has been stored in the barn ever since. It really is beautiful but I need to extra space in my barn to store additional haying equipment. $5,500 obo; Norm nnn-nnn-nnnn (Carson City NV)
International OS-4 , manufactured between 1946-'53. New rear tires, front good, sheet metal good, new battery, runs great. Easy restoration, $1500 obo; Stu Wade nnn-nnn-nnnn (Chico CA)
International TD6 series II direct start 6 cyl. Diesel hydraulic blade with hydraulic tilt built up grousers-good yellow paints engine wants to lope at idle. Probably needs adjustment on governor. Good solid dozer, $4250 obo; Don Chappell nnn-nnn-nnnn (St Helens OR)
John Deere 2010, yellow, no backhoe, loader rebuilt bucket, bad trans interior pump, best offer; Sue Miller nnn-nnn-nnnn (Eugene Oregon)
John Deere 300 Skip loader tractor for sale. (Early 60s) Not running, needs TLC. New front tires and starter, $1250; Bernie Swetz nnn-nnn-nnnn or xxxx@xxxx.xxx (Santa Rosa CA)
John Deere 430 tricycle (restored) new rubber, COLLECTOR, $6500 obo; Jerry nnn-nnn-nnnn (Gaston OR)
John Deere 50 tricycle with Yakima hitch, runs; Delmer Riel nnn-nnn-nnnn (Yakima WA)
John Deere 520, narrow front, 3 pt hitch, still in work clothes; J Keith nnn-nnn-nnnn (Hermiston OR)
John Deere 60 parted out, lots left: crank, head, grill, hood, long rear axles, plus misc. parts, call with needs; Mark Parker nnn-nnn-nnnn (Lebanon OR)
John Deere 620, 1957, sn 6217734, in good condition, wide front end, power steering, live hydraulics, live pto, 3pt hitch with top link, new rear tires, good front tires, 2 remotes, used for show and parade, $4500; Richard Findlay nnn-nnn-nnnn (Moses Lake WA)
John Deere A unstyled parts..A1170 R governor & fan shaft assy, $150. Set of lugged steel wheels 10 spline hub, $400. #A12 R first red. gear, $50. Complete clutch pulley assy #A17 R with A20 R disk & A19 R drive, $125. Radiator top and bottom tanks with sides, $50. Good crankshaft with end bearings, $75. All parts in good condition. Can bring parts to Turlock swap meet March 15th; Frank nnn-nnn-nnnn or xxxx@xxxx.xxx (Morgan Hill CA)
John Deere A, B, M, 40-440 tractor parts. No sheet metal. Lots of engine parts, blocks, heads, rods, some pistons. Please text or email with needs; Jake Winn nnn-nnn-nnnn or xxxx@xxxx.xxx (Albany OR)
John Deere AW, 1948. Engine overhauled. Just clean it and paint it, $2500; Chris nnn-nnn-nnnn (Camano Island WA)
John Deere AW, 1952, starts and runs well. Lights and generator, $1850. John Deere AW 1952. Good running tractor, $1750; Chris nnn-nnn-nnnn (Camano Island WA)
John Deere B, 1938, long frame model, engine rebuilt, good period tires, front spokes very good unstyled tractor ready for paint. Price reduced to $3975 firm; Don Chappell nnn-nnn-nnnn (St Helens OR)
John Deere B, 1939 parts: head, block, pistons, complete assembly, $500. Complete radiator, $300; Don Chappell nnn-nnn-nnnn (St Helens OR)
John Deere B, 1939, (2). One set of skeleton steel wheels in good condition. These are a matching set. One hub was replaced in 1966 and was used on the tractor after repair, $800; M. Stanerson nnn-nnn-nnnn or xxxx@xxxx.xxx (North English IA)
John Deere B, 1942, on tip toe steel and front steel with extensions. Good runner, nice original tractor, $2750; Chris nnn-nnn-nnnn (Camano Island WA)
John Deere B, 1943, on steel. Good running original tractor, $2750; Chris nnn-nnn-nnnn (Camano Island WA)
John Deere B, 1949. Running tractor, has been in fire. Needs tires and paint, $700; Chris nnn-nnn-nnnn (Camano Island WA)
John Deere B, 1951. Starts and runs good. Original paint. Straight hood, missing grills. Decent older tires. Asking $1200 obo text or email for pix; Jake Winn nnn-nnn-nnnn or xxxx@xxxx.xxx (Albany OR)
John Deere B, late styled, parting out. Good sheet metal, many useable parts, give me a call today; John Bold nnn-nnn-nnnn or xxxx@xxxx.xxx (Delhi CA)
John Deere BN, 1947, 42" rear wheels and 16" single front, round axle housing and wide axles, runs, $1500; Chris nnn-nnn-nnnn (Camano Island WA)
John Deere BO, 1937 earlier restoration, runs good, like new tires all around, new fenders. Has been in lots of parades and hayrides, $4900. Delivery available for fuel costs; John Loder nnn-nnn-nnnn or xxxx@xxxx.xxx (Redmond WA)
John Deere BR 1945 parts tractor, $200; Rusty Brizendine nnn-nnn-nnnn (Roseburg OR)
John Deere BW, 1946, with anteater front end, $1500; Chris nnn-nnn-nnnn (Camano Island WA)
John Deere D, 1928 rear steel wheels with lugs, $1200 obo; Steve Zane nnn-nnn-nnnn (Paynes Creek CA)
John Deere D, 1935, complete, not stuck. Comes with brand new fenders & hood, very nice old '36 D, $2975; Don Chappell nnn-nnn-nnnn (St Helens OR)
John Deere early A and AR magneto Fairbanks Morse DRV2A, rebuilt in great condition, $500; Mark Parker nnn-nnn-nnnn (Lebanon OR)
John Deere GPO parts; Dave Gallant nnn-nnn-nnnn (Boring OR)
John Deere H 1940. Easy hand start, fenders, matched rubber nice paint, $2200; Dave nnn-nnn-nnnn Please leave message. (Silverton OR)
John Deere HN, 1942, new Firestone rear tires, $2500; Chris nnn-nnn-nnnn (Camano Island WA)
John Deere HN, new rear Firestone tires, $2500; Chris nnn-nnn-nnnn (Camano Island WA)
John Deere L, 1939? Very straight tractor in running condition. Good tires and wheels. Comes with cultivators, $3975 obo, some trade? Don Chappell nnn-nnn-nnnn (St Helens OR)