May 2014 - Tractors & Parts For Sale

All Classified Ads

Allis Chalmers 1934 WM, valves ground, tracks good, 15" pads, replaced steering clutch discs and crank start. Sand blasted and painted, $2300 obo; Bob Arndt nnn-nnn-nnnn (Cromberg CA)

Allis Chalmers 1937 WM, valves ground, cylinders honed, rebuilt carb, several steering clutch plates replaced, electric start, sand blasted and painted, $2750 obo; Bob Arndt nnn-nnn-nnnn (Cromberg CA)

Allis Chalmers B, hand crank, partially restored, some spare parts, $500 obo; Brian nnn-nnn-nnnn (Ellensburg WA)

Allis Chalmers C, 1948, 2012 restoration, rebuilit engine & clutch, tires 95%, must see to appreciate, $2195 obo; Bob Bowman nnn-nnn-nnnn (Sheridan OR)

Allis Chalmers D-12, with sickle mower, runs great; Jerry nnn-nnn-nnnn (Gaston OR)

Allis Chalmers D14 gas motor, runs good; Phillip Morrison nnn-nnn-nnnn (Redmond OR)

Allis Chalmers D-14, looks and runs good, good tires, live power, three point hitch and power steering. Tractor falls out of third gear, otherwise everything works fine, $2500 or trade for small dozer, D2 size; Bob nnn-nnn-nnnn (Omak WA)

Allis Chalmers D15 with 4 new tires, or will sell the motor; Phillip Morrison nnn-nnn-nnnn (Redmond OR)

Allis Chalmers G, nice original tractor, $2500; please call or text Jim nnn-nnn-nnnn (Benton CA)

Avery A, 1948, single front wheel. Has original type Montgomery Ward tires on rear. Tires are in good condition. Nice non-restored tractor, runs great, $1200 obo; Mike's Tractor Ranch nnn-nnn-nnnn or nnn-nnn-nnnn (Albany OR)

Case 1190, diesel, runs, parts tractor, $1000; Boyd or Nancy Rulifson nnn-nnn-nnnn or Toll Free nnn-nnn-nnnn (Tillamook OR)

Case 995, runs, $3500; Boyd or Nancy Rulifson nnn-nnn-nnnn or Toll Free nnn-nnn-nnnn (Tillamook OR)

Case C parting out call with needs; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Case C, 1929, complete and stuck on cut downs to rubber has rare flat belt water pump, $600 obo; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Case C, S or R F&H hc245 Rear round spoke wheels 9x24 very nice and rare $400; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Case D, 1952, live pto hydraulic; Don Kravik nnn-nnn-nnnn (Whitehall MT)

Case ID, $350; Hubert Bierly nnn-nnn-nnnn (Bend OR)

Case Manuals, all prices postpaid. 580 Construction King, Parts, 11/68, 193 pages, good+, $25. 580 Backhoe 33 & 33S & 33 Loader, Parts, 6/69, 179 pages, good+, $25. 300B - 400B series tractors, Parts serials 6095009 up, 5/58, 197 pages, good+, $25. Utility Loader for models 210B, 310 & 310B Tractors, Parts, 11/60, 48 pages, good+, $20. Backhoe for 310 & 310B Tractors, Parts catalog A641 after #4068724, 12/59, good, $20. Dick Lloyd nnn-nnn-nnnn or xxxx@xxxx.xxx (Lewiston ID)

Case RC, original barn fresh, $2,500; call or text Jim at nnn-nnn-nnnn (Benton CA)

Case round nose 300, very nice unrestored tractor complete with Eagle hitch, $1975 obo; Don Chappell nnn-nnn-nnnn (St Helens OR)

Case SC, new mag. Good rubber on rear. Runs, $600 obo; Jack Muirhede II nnn-nnn-nnnn (Albany OR)

Case SC. New mag. Good rubber on rear. Runs good. $600 obo; J & J Tractor Restoration nnn-nnn-nnnn (Albany OR)

Case tractors: Case LA, 1947, new rear tire, runs good, orig. condition, flat lensed lights, rebuilt starter and battery cables and new deck installed, $2500. Case CC, 1938, original condition, runs good, fair tires, $2500. Case C, 1929, on steel, restored. Original flat belt water pump, $2500. Will consider trades-what have you got ??? to see pics. go to www.newoldiron.wix.com/collectables; Jim Gardner nnn-nnn-nnnn or xxxx@xxxx.xxx (Vernonia OR)

Case VAC, 14 adjustable wide front, eagle hitch, pto, hole auger, three point post pounder, $2500; Don Kravik nnn-nnn-nnnn (Whitehall MT)

Case VAC, wide front, new tires, very good running condition, $1500; Aubrey Greer nnn-nnn-nnnn (Lompoc CA)

Case VAO, fair rubber, needs a few pieces of tin, but all there & restorable, not stuck, $500 obo; Brian nnn-nnn-nnnn (Ellensburg WA)

Cast iron front wheels for John Deere H, $100 pair; Gene nnn-nnn-nnnn (Davenport WA)

Caterpillar 10 & 15 gas tanks; Don Chappell nnn-nnn-nnnn (St Helens OR)

Caterpillar 15 gas 1934 hyd blade. 95% U/C, runs good, have good orig gas tank, $1500. See pics at www.newoldiron.wix.com/collectables; Jim Gardner nnn-nnn-nnnn or xxxx@xxxx.xxx (Vernonia OR)

Caterpillar 22 carb $50. 2 track roller grease guns, $50 ea; nnn-nnn-nnnn or email xxxx@xxxx.xxx (Beavercreek OR)

Caterpillar 22, have two: one Orchard & one Logging complete. Both stored in the dry; Marv nnn-nnn-nnnn (Salem OR)

Caterpillar 30, $3000; Jim Messick nnn-nnn-nnnn (Linden CA)

Caterpillar 6G series wide gauge thirty. Have had engine running, have not driven tractor. Mostly complete, comes with belly pan, and an extra radiator. Undercarriage fair, sheet metal fair, $2500; Mr. Kim Kestler nnn-nnn-nnnn (Reno NV)

Caterpillar D-2 5J series wide gauge tractor. Runs good, has a hydraulic bulldozer blade, brand unknown. Undercarriage fair. Located in Eureka NV, $3500; Mr. Kim Kestler nnn-nnn-nnnn (Reno NV)

Caterpillar D2 items: Two D2 seat tanks very nice (Early), $250 ea. D2 PTO complete, $275. Three D2 lights, $25 ea. Four D2 track wrenches $40 ea. D2 track adjuster covers, used, $150 pair. D2 engine side panels, new, $250 pr; nnn-nnn-nnnn or email xxxx@xxxx.xxx (Beavercreek OR)

Caterpillar D-2. 5J series wide gauge tractor. Top seat model. Tractor runs good, undercarriage good, $2000; Mr. Kim Kestler nnn-nnn-nnnn (Reno NV)

Caterpillar D2-5J series, 1938, sn 2032sp. Starting engine and diesel run very well. Tractor has been in storage since the mid 80's, $1900 obo; Tim Morris nnn-nnn-nnnn (Napa CA)

Caterpillar D4 ag tractor crawler, sn 7U8266. Never had a blade but does have PTO. Ran when last parked. Been under cover for years. Tractor located in Montana. Best offer; Ken Erstad nnn-nnn-nnnn (Walker SD)

Caterpillar D-7 3T series, 1948. Runs very good. Has electric start pony which runs well. Has hydraulic assist steering, and forward/reverse lever. Undercarriage is good, grousers are a little low. No attachments, $4250; Mr. Kim Kestler nnn-nnn-nnnn (Reno NV)

Caterpillar Twenty Eight topseat standard gauge. Engine free, not running. Manifolds & carb are rough, but possibly useable. I have a new drop tube manifold part for it. Sheet metal is fair, undercarriage is fair, $2000; Mr. Kim Kestler nnn-nnn-nnnn (Reno NV)

Centaur tractor, $500.; Fred Alexis nnn-nnn-nnnn or xxxx@xxxx.xxx (La Grande OR)

Centaur tractor, 1929, used for placer mining/belt work, to run a water pump, nice condition, $1950; Terry Christner nnn-nnn-nnnn (Molalla OR)

Cletrac AD 1936 Hercules Diesel, hydraulic dozer (Issacson), valves ground, cylinders honed. Diesel pump gone through and adjusted, starter gone through, steering bands replaced, good tracks, sand blasted and painted, $2500; Bob Arndt nnn-nnn-nnnn (Cromberg CA)

Cletrac AD2 1937 Buda Diesel, valves ground, starter gone through, diesel pump cleaned and gone through and adjusted, set for pressure. Sand blasted and painted. Cylinders honed. Good tracks, $2200; Bob Arndt nnn-nnn-nnnn (Cromberg CA)

Cletrac HG, small dozer, almost identical to the Oliver OC3, has nice blade, PTO unit, been sitting for years and motor is stuck. Has very good undercarriage, 95% complete, $1250 as is, no problem loading; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)

Cockshutt 30, 1947, live hydraulics, live pto, swing drawbar, lights, new paint & decals, $2100; Al Barkl nnn-nnn-nnnn (Elko NV)

Co-op E3, 1946, live hydraulics, live pto, creeper gears, belt pulley, swing drawbar, fenders, nice original color, new paint & lights, correct decals, sn 112, $2350; Al Barkl nnn-nnn-nnnn (Elko NV)

Coop E3, live pto hydraulic, runs; Don Kravik nnn-nnn-nnnn (Whitehall MT)

Earthmaster B. Runs good. Rebuilt generator. Extra set of rear tires. Grille is in perfect condition complete with brass badge, $900 or offer; Jack Muirhede II nnn-nnn-nnnn (Albany OR)

Ensign carbs for Cat 20, 30 all rebuilt $450. D2-D6 battery box covers with thumb screws $80. D2 engine side panels $195 per pair. D2 track adjuster covers new $450 pair; nnn-nnn-nnnn or xxxx@xxxx.xxx (Beavercreek OR)

Farmall 200 with loader, blade, disc, and plow. Equipment is all factory 2-pt and in excellent condition. All for $3500. Can send pictures; Fred Gilbertson nnn-nnn-nnnn or xxxx@xxxx.xxx (Creswell OR)

Farmall 300, wide front, tin & tires good, runs very good, dual hyd, front & back. Reduced to $2000; Aubrey Greer nnn-nnn-nnnn (Lompoc CA)

Farmall 350 side panels, center strip; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Farmall B, 1941, sn 56011. Narrow front, new rear wheels, great tires all around, runs really well, non-restored. Great tin. Great project or work it or just enjoy it, $1500 obo; Mike's Tractor Ranch nnn-nnn-nnnn or nnn-nnn-nnnn (Albany OR)

Farmall B. Excellent condition, all there and runs good. Tires 75%. This tractor has been well taken care of. The owner is selling due to health reasons. I can send pictures. $1800; Walt Bernard nnn-nnn-nnnn (Dorena OR)

Farmall Cub parts: call with your needs; Don Chappell nnn-nnn-nnnn (St Helens OR)

Farmall Cub with sickle mower and blade; Jerry nnn-nnn-nnnn (Gaston OR)

Farmall Decals. Complete sets of the correct decals for the Regular, F-20, F-30, F-12 and F-14. Partial sets for the W-series, O-series, and T-series. These are commercial grade vinyl decals with a UV protective coating. Pictures available by email. Complete sets start at $58; Bob Currie nnn-nnn-nnnn or xxxx@xxxx.xxx (Greenwood CA)

Farmall H, wide front end, good tires & tin. Used to bale hay. Runs very good, reduced to $1500; Aubrey Greer nnn-nnn-nnnn (Lompoc CA)

Farmall Lo-boy, original condition, $2,500; call or text Jim at nnn-nnn-nnnn (Benton CA)

Farmall M, 1940's, factory wide front with new tires. Runs great, sheet metal is excellent. No 3 point. Has p.t.o., $2,200; Lance nnn-nnn-nnnn (Harrington WA)

Farmall M, H, C, B, A and Cub parts; tell me what you need; Wendell Newman nnn-nnn-nnnn (Carson City NV)

Farmall parts: Farmall H drawbar, Farmall fast hitch drawbar, Farmall Monroe seat H & M complete, no cushion, misc Farmall parts; Al Barkl nnn-nnn-nnnn (Elko NV)

Farmall parts: Monroe seat h/m 50’s, H drawbar, fast hitch drawbar large, H front rims, misc parts. Can take to Rio Linda CA May 9-10 show; Al Barkl nnn-nnn-nnnn (Elko NV)

Farmall Super A parts & sickle bar mower; Don Chappell nnn-nnn-nnnn (St Helens OR)

Farmall Super A, 1954, sn 349510. 4-speed, super runner, great for parade. Paint fresh, tires match, priced right, photo on request; nnn-nnn-nnnn or nnn-nnn-nnnn or xxxx@xxxx.xxx (Chico CA)

Farmall Super H, 1954. Engine has new sleeves, pistons & bearings. Has aux valve for rear imp. belt pulley, swing drawbar, lights, nice paint & decals, restored 3 years ago, $5200; Al Barkl nnn-nnn-nnnn (Elko NV)

Farmall Super M motor stuck, great project, $700; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Farmall Super M, 1953, with Farmhand F-11 loader with bucket, 13-6x38 rear tires with field chains, new 650-16 fronts, very good running tractor, $2000; Al Barkl nnn-nnn-nnnn (Elko NV)

Farmall T-6 orchard model dozer with blade, can be angled. Recent restoration, photo taken before blade was added, $3200 obo; Roger nnn-nnn-nnnn (Redding CA)

Farmall tractors: Farmall Cub, 1948, duals, sickle bar mower, step, new gauges, more; Farmall C, 1949, 3 pt plow, new gauges, some new tires; Farmall A with sickle bar mower, some new tires, new battery box; Farmall B, new front tires, new battery box; Farmall AV, 1952, runs, has hydraulics, belly blade, 2 row cultivators. All tractors are mechanically restored and run; Roger nnn-nnn-nnnn (Redding CA)

Farmall W6, gas, wide, $1000; Boyd or Nancy Rulifson nnn-nnn-nnnn or Toll Free nnn-nnn-nnnn (Tillamook OR)

Ferguson TO 30 parts tractor. Chassis only, no rims, some tin. Loading available. Make offer; Jon Rodgers nnn-nnn-nnnn (Sonora CA)

Ford 2N, 1946, 3pt., new paint, extra set of rear tires, runs good, $1400. See pics at www.newoldiron.wix.com/collectables; Jim Gardner nnn-nnn-nnnn or xxxx@xxxx.xxx (Vernonia OR)

Ford 850 with loader. Excellent condition, older restoration, but very clean, $5000; Bob nnn-nnn-nnnn daytime (Orange CA)

Ford 8N parts; Don Chappell nnn-nnn-nnnn (St Helens OR)

Ford 8N, have two. One has Sherman trans, one has Howard trans with side mount distributor. Both for parts or restore. Will part out. Call for prices; Don Chappell nnn-nnn-nnnn or cell nnn-nnn-nnnn (St Helens OR)

Ford 8N, sn 177. This is a 1947, one of the first of over 500,000 8N's. This tractor is totally restored. Has factory front bumper, headlights, rear work light and factory tail light-all rebuilt. New radiator, wiring harness, gauges, water pump, battery, etc. Has the original Firestone 10x28 tires with excellent tread and 4x19 fronts (original). Much more. Come see- make offer; Don Chappell nnn-nnn-nnnn (St Helens OR)

Ford 900, good condition factory propane, high clearance row crop, wheel weights front and rear, $1500 or make offer; Dan M Rocha nnn-nnn-nnnn (Selma CA)

Ford 9N restoration started but no time to finish. Tractor has new rear tires and rims. Sherman transmission, newer seat, 8N front wheels with 16" tires, and very good hood with new grill. Lots of work done including brake seals, $900 firm; Fred Gilbertson nnn-nnn-nnnn or xxxx@xxxx.xxx (Creswell OR)

Ford Dexta Orchard, was running when parked in the dry a few years ago. Has large, wide low pressure rear tires; Marv nnn-nnn-nnnn (Salem OR)

Ford NAA with Sherman three-speed aux trans. Looks good, runs good. New clutch, live hyd, $3000; Robert C Pierce nnn-nnn-nnnn (corrected phone number) (Omak WA)

Fordson Super Major, collector’s item, diesel, wide, $2500; Boyd or Nancy Rulifson nnn-nnn-nnnn or Toll Free nnn-nnn-nnnn (Tillamook OR)

Fordson tractor, all metal wheels, nice sheetmetal, appears complete except missing little doors on fenders. Engine probably stuck. Rolls OK, $1200 obo; Terry Johnson nnn-nnn-nnnn or xxxx@xxxx.xxx (Mountain Ranch CA)

Fordson tractors, 1922 and 192?, both run & complete, on steel with rear fenders. Will trade both for a running Model T pickup or Model A pickup; Kevin Alden nnn-nnn-nnnn (Walnut Creek CA)

Gambles Farmcrest 30, 1948, live hydraulics, live pto, belt pulley, swing drawbar, fenders, correct seat, lights. 13-6x38 on rear, new paint & decals, creeper gears, $2250; Al Barkl nnn-nnn-nnnn (Elko NV)

Hood, grille & other misc. sheet metal parts for some sort of Case "Tripl-Range" tractor. Call for details; Daniel Morgan nnn-nnn-nnnn or xxxx@xxxx.xxx (Onyx CA)

International 350 Hi-Utility Rare 800 built gas runs 2000 hrs. fast hitch 1 hyd. remote all lights, $1450; Mark Parker nnn-nnn-nnnn (Lebanon OR)

International ID9, starts on gas, runs on diesel. Wide front, dual back, good running condition, starts easily, 12V, $1800; Aubrey Greer nnn-nnn-nnnn (Lompoc CA)

International TD-14-A crawler, diesel, starts on gas, then you switch to diesel. SN TDF 30319 Max RPM 1555 last run in 1975, 39 years ago. Has 20" track, good undercarriage. Has a bee gee hyd system for rear rams or for hyd blade. Has lights. Brush guards wiring dry rot, same with seat. Turns over good with crank, not froze or stuck. Umbrella stand, manual for crawler. Everything is there but driver. Needs a good home. 135 miles east of Boise, can load for you. Mama says its got to go; nnn-nnn-nnnn or xxxx@xxxx.xxx (Paul ID)

International TD-6 motor parts block head; Mark Parker nnn-nnn-nnnn (Lebanon OR)

International TD9, runs & steers, 22” pads & blade, $2500; Boyd or Nancy Rulifson nnn-nnn-nnnn or Toll Free nnn-nnn-nnnn (Tillamook OR)

International WDR9 All original condition. Excellent sheet metal. Complete except for one headlight. Starts on gas and runs on diesel. Local delivery. $2800 obo; J & J Tractor Restoration nnn-nnn-nnnn or xxxx@xxxx.xxx (Albany OR)

John Deere 1936 unstyled A parts tractor. Missing head, rocker arm assembly, air cleaner bottom & right hand brake assembly. Has factory round spoke 10 spline wheels. Rear wheels need to have new rims installed. Tractor has an aftermarket BEE GEE hydraulic system on it. Good transmission and lower half of engine. $750 or best offer obo. Tractor is located an hour north of Truckee, CA.; Tim Morris nnn-nnn-nnnn (Napa CA)

John Deere 40 crawler, gas, winch, Yakima blade, $5000; Boyd or Nancy Rulifson nnn-nnn-nnnn or Toll Free nnn-nnn-nnnn (Tillamook OR)

John Deere 410 diesel with low hrs on engine, good rubber. Industrial loader tractor does not have a back hoe, good running loader tractor; Jerry nnn-nnn-nnnn (Gaston OR)

John Deere 420 with front loader and backhoe, fair condition, $1500 or make offer; Dan M Rocha nnn-nnn-nnnn (Selma CA)

John Deere 420C complete engine with radiator. Good oil pressure, $975; Don Chappell nnn-nnn-nnnn (St Helens OR)

John Deere 420U, 1956, 5-speed with reverser. Rear tires 90%, front tires 90%. One of 2600 built, $6000; Phil Wall nnn-nnn-nnnn cell or nnn-nnn-nnnn (Enumclaw WA)

John Deere 420U, 1957, sn 106102, restored. Wide front, 4 speed, PTO. Runs and drives good. New tires front, 80 to 90% rear. Rear wheel weights, 3 point with correct 3rd link. 4 year old paint job with Jorde decals, Lindstrom Sunbrella custom cover, both manuals and all paperwork. With restored 415-A 3 point integral (2-14 bottom) plow. New Tyler Buchheit points, extensions and trash boards. Bottoms are soft painted when not in use. Manuals and paperwork. Nice original set up. Everything works. $5500; Bob Folk nnn-nnn-nnnn xxxx@xxxx.xxx (Eastsound WA)

John Deere 60 parted out, lots left: crank, head, flywheel, grill, hood, long rear axles, plus misc. parts, call with needs; Mark Parker nnn-nnn-nnnn (Lebanon OR)

John Deere 60N runs well, very good sheet metal, 3 point hitch, sn 6022526, $2000; Mick nnn-nnn-nnnn or xxxx@xxxx.xxx (West Richland WA)

John Deere 70 diesel, 1954, pony start, wide front, new rear tires. Currently not running. Needs injectors or fuel pump attention. $3200 obo; Lance nnn-nnn-nnnn (Harrington WA)

John Deere 80, manual steer, 199 built, all exported but 3. This one shipped to Choteau, MT. Restored, $10,000; Gene nnn-nnn-nnnn (Davenport WA)

John Deere A, 1949. Roll-o-matic front end. Nice rear tires, good runner; Chris nnn-nnn-nnnn (Camano Island WA)

John Deere AN, 1946, electric start, $750 or ? Also have Diesel Pump Injector service stand that came out of a John Deere shop. It is for 2 cyl and has extra parts with it and the settings chart that hung on the wall in the shop. Complete your display area and/or use it for your 2 cyl tractors, $400; Larry nnn-nnn-nnnn (ID)

John Deere AN, 1952, nice running tractor; John Deere BW, 1947. Turns over, ran last year. Needs a rear tire. New front tires. 45W loader mounted; Chris nnn-nnn-nnnn (Camano Island WA)

John Deere B, 1938, long frame model, engine rebuilt, good period tires, front spokes very good unstyled tractor ready for paint. Price reduced to $3975 firm; Don Chappell nnn-nnn-nnnn (St Helens OR)

John Deere B, 1939 part: head, block, pistons, complete assembly, $500. Complete radiator, $300; Don Chappell nnn-nnn-nnnn (St Helens OR)

John Deere B, 1942 with tip toe rear still, front steel with extensions. Nice original running tractor; Chris nnn-nnn-nnnn (Camano Island WA)

John Deere B, 1944. Parade ready, new tires, painted by Stetson family, hand start, recent carb rebuild, $3450; Terry Christner nnn-nnn-nnnn (Molalla OR)

John Deere B, 1947. Original paint. Starts and runs good. Tin is straight. Electric start. Decent tires, $1100 obo. Can email pix; Jake Winn nnn-nnn-nnnn or xxxx@xxxx.xxx (Albany OR)

John Deere B, 1948 parts tractor, fair tires. John Deere BN, 1949 long axel, engine taken apart, good tin & tires. John Deere B, 1952 Roll-o-matic, complete, good tin & tires, plus some extra B parts. Will not part out. Take all for $1800; Randy Wixsten nnn-nnn-nnnn (Butte MT)

John Deere B, 1949. Nice rear tires, new fronts; Chris nnn-nnn-nnnn (Camano Island WA)

John Deere B, sn 224545. Many new/rebuilt parts. Runs great. Best offer; LeRoy Schoot nnn-nnn-nnnn or xxxx@xxxx.xxx (Goldendale WA)

John Deere B1545R cast rear wheels. Circa 1941 two piece 12 spline $300 ea, very heavy; Frank Stricklin nnn-nnn-nnnn or xxxx@xxxx.xxx (Silverdale WA)

John Deere BO Lindeman crawler, excellent condition, runs, hand start, good tracks, no blade, sn336407, $7000 or offer. Call after 3pm; Russell Brown nnn-nnn-nnnn (Newberg OR)

John Deere BO Lindeman crawler, frame only, $300 or offer. Call after 3pm; Russell Brown nnn-nnn-nnnn (Newberg OR)

John Deere BW, 1949. Tractor is in very good original shape & was repainted a number of years ago. Fairly new tires that were installed 5 years ago. Everything works good on it, $3800; Tim Morris nnn-nnn-nnnn or xxxx@xxxx.xxx (Napa CA)

John Deere D or GP water valve, $135; Buck nnn-nnn-nnnn (Greenville IL)

John Deere D, 1928, running and on full steel, restored in 1999, $4000; John Bold nnn-nnn-nnnn or xxxx@xxxx.xxx (Delhi CA)

John Deere D, 1929 project. Has PTO Kay Bruner rear wheels, engine is free, has original mag and carb, radiator looks good, poor sheet metal, $750 or offer.; E & A Heavy Equipment nnn-nnn-nnnn or xxxx@xxxx.xxx (Redmond OR)

John Deere D, 1936, on cutdowns, complete, not stuck. Comes with BRAND NEW FENDERS & HOOD, very nice old '36 D, $2975; Don Chappell nnn-nnn-nnnn (St Helens OR)

John Deere Early A and AR magneto Fairbanks Morse DRV2A, rebuilt in great condition, $500; Mark Parker nnn-nnn-nnnn (Lebanon OR)

John Deere G, 1947. Original running tractor. Early 47 with no batter box under the seat. Looks like a GM but the tag says G; Chris nnn-nnn-nnnn (Camano Island WA)

John Deere GP clutch-belt pulley, NOS, $300; Buck nnn-nnn-nnnn (Greenville IL)

John Deere H, 1941, engine rebuilt, mag rebuilt. Hand start. Tires 99%, $4500; Phil Wall nnn-nnn-nnnn cell or nnn-nnn-nnnn (Enumclaw WA)

John Deere H, 1941, flywheel start, looks good, starts & runs good. New brakes, axle bearings & seals. New tires front & back, no calcium in tires, $3500; Vaughn Parker nnn-nnn-nnnn (Bellvue WA)

John Deere H, 1946, electric start, restored, very nice, reduced to $3975; Don Chappell nnn-nnn-nnnn or cell nnn-nnn-nnnn (St Helens OR)

John Deere HN, 1939. Older restoration, new Firestone rear tires; Chris nnn-nnn-nnnn (Camano Island WA)

John Deere hood, fits 1941 & other years, $50; Hubert Bierly nnn-nnn-nnnn (Bend OR)

John Deere hubs, the ones which are so hard to find. A pair F858R, pair of clamps to fit A1812R, pair of cast wheels A3402R, also a good pair of 10" by 42" rims, one has a mounted 11 by 42 R1 tire and tube. The hubs fit a 12 spline 3 1/4" OD axle; Dick Lloyd nnn-nnn-nnnn or

xxxx@xxxx.xxx (Lewiston ID)

John Deere L unstyled 1938. Third one built! Older restoration. All sheet metal and shields there and in great shape. No cracks, breaks, or welds that I could find. Has original cast wheels with correct tires that were new when it was restored years ago. Also has belt pulley. Engine turns free. Has been sitting in barn for years. Would not take much to get it running. Has dent in top of radiator that could be an easy repair, $6500 obo. Would consider trade with cash for restored 39-40 JD H or other restored JD; Jim Harry at nnn-nnn-nnnn or Ray Harry at nnn-nnn-nnnn or xxxx@xxxx.xxx both after 5:30 PM (Olympia WA)

John Deere L/LA tractor wanted in restorable condition; Clark Higley nnn-nnn-nnnn (Kimberly ID)

John Deere LA, 1944, restored to perfection. Has both belt pulleys, lights, starter, new rubber, new wheel weights, professional paint & engine rebuild. This will make someone a beautiful parade or show tractor. Comes with sickle bar mower & plow, $4195; Lee nnn-nnn-nnnn (Crawfordsville OR)

John Deere LA, 1944, restored to perfection. Has both belt pulleys, lights, starter, new rubber, new wheel weights, professional paint & engine rebuild. This will make someone a beautiful parade or show tractor. Comes with sickle bar mower & plow, $4195; Lee nnn-nnn-nnnn (Crawfordsville OR)

John Deere LCU engines, have two, $350 for the pair. Email for more info.; Fred Alexis nnn-nnn-nnnn or xxxx@xxxx.xxx (La Grande OR)

John Deere Lindeman dozer, complete, $1500; Gene nnn-nnn-nnnn (Davenport WA)

John Deere L's or LA's. I have two disassembled. $400 for the pair; Fred Alexis nnn-nnn-nnnn or xxxx@xxxx.xxx (La Grande OR)

John Deere M Power-Depth-Control with mounting brackets. Have one, $125 obo; Daniel Morgan nnn-nnn-nnnn xxxx@xxxx.xxx (Onyx CA)

John Deere M, 1949, fresh from the blackberries, missing one back rim but have the tire, front tires shot but rims OK, small dent in hood, otherwise complete, $500; Jim Evans nnn-nnn-nnnn or e-mail to xxxx@xxxx.xxx (Gales Creek OR)

John Deere parts: L-LA-M front cast wheels, $35 each. Rear fenders, $25 each. JD 40c-420C rock guards, $50 each. Good JD 420 rear sprocket, bottom rollers, $50 each. Some cast iron seats, lots more. Will be at the AFETA Swap Meet at the Elma Fairgrounds on May 17; Larry Schwarz nnn-nnn-nnnn or xxxx@xxxx.xxx (Centralia WA)

John Deere R, restored, with new brakes & clutch. Put over $10,000 in restoration, will sell for $9000; Doug Knight nnn-nnn-nnnn (Pendleton OR)

John Deere R, sn 17846. Both engines run well. The family I bought this from seldom used the starting engine due to not being able to get it to work consistently during the 30+ years they owned it. Consequently this starting engine has far less hours on it than you would expect. I bought it in 2002 and in 2007 started the starting engine and it has started the big engine every time. This tractor needs tires, the existing tires hold air but are bald. Also have a partially dismantled R, sn 16673. I started at $4500 for both, I am down to $3000 for the two. This is getting close to scrap price and I am getting close to going that way. Grab them now or I may start parting out and scrapping. Give me your phone # and parts needs and if I decide to part out I will contact you after I see what the response is like; Jim Temple nnn-nnn-nnnn (Noti OR)

John Deere tractors for sale, these and many more: GP, 1929, sn 21537; GP, 1931, sn 228055; B, 1937, sn 38478; Jerry nnn-nnn-nnnn (Tehachapi CA)

Kubota L295 parts, call for availability and price. Also have used loader off L295, $1750; nnn-nnn-nnnn or xxxx@xxxx.xxx (Beavercreek OR)

Light bar for John Deere H, totally restored, $40; Wendell Newman nnn-nnn-nnnn (Carson City NV)

Lindeman BO crawler, been in same family all its life, not running but very good condition throughout. Good sheet metal, good undercarriage, tracks very good, not all broke and welded, in fact did not see a weld on it, 99% complete, been sitting in a barn for many years. Motor is stuck. Steered both ways when we pulled it out. Serial number 335798, very nice machine. Call for Pics. $4500; Joe Giordano nnn-nnn-nnnn (Port Orchard WA)

Magneto for Cat D2 and D4 starting motor, $300; nnn-nnn-nnnn or xxxx@xxxx.xxx (Beavercreek OR)

Massey Ferguson 135 gas, power steering, good rubber, good sheet metal, live PTO, 3 pt., low-high transmission for tilling, $3975 obo; Don Chappell nnn-nnn-nnnn (St Helens OR)

Massey Ferguson 35, diesel, runs, needs steering gear, $2500; Boyd or Nancy Rulifson nnn-nnn-nnnn or Toll Free nnn-nnn-nnnn (Tillamook OR)

Massey Ferguson 65, bad engine, tri-cycle, $1000; Boyd or Nancy Rulifson nnn-nnn-nnnn or Toll Free nnn-nnn-nnnn (Tillamook OR)

Massey Ferguson 85. Has good tires, paint is good, square belly mower, don't know if it runs, $600; Ruth Walker nnn-nnn-nnnn (Chewelah WA)

Massey Ferguson 97, 1963, 93 hp plus. Duals, beautiful tractor, lots of pulling trophies, $10,000; George Kurtz nnn-nnn-nnnn (Albany OR)

Massey Harris 101 Jr. Standard, runs, needs side panels, $700; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Massey Harris 22, gas, flathead, wide front, hyd., $1500; Boyd or Nancy Rulifson nnn-nnn-nnnn or Toll Free nnn-nnn-nnnn (Tillamook OR)

Massey Harris 44, wide, gas, has grill, $1500; Boyd or Nancy Rulifson nnn-nnn-nnnn or Toll Free nnn-nnn-nnnn (Tillamook OR)

Massey Harris 555 LP, 1957. Rare tractor, 51HP, runs well, good sheet metal and tires, needs paint, $3250; Terry Christner nnn-nnn-nnnn (Molalla OR)

McCormick Deering I-4, turns over, good shape, $950; Mark Parker nnn-nnn-nnnn (Lebanon OR)

McCormick Deering O-4: Runs, missing orchard sheet metal, $1000; McCormick Deering O-4: Very early motor stuck nice, missing orchard sheet metal, $650; Mark Parker nnn-nnn-nnnn (Lebanon OR)

McCormick Deering rare ODS-6s Orchard diesel, 1 with motor stuck, all complete, and 1 parts tractors. Will sell parts or for pair, $1600 obo; Mark Parker nnn-nnn-nnnn (Lebanon OR)

McCormick Deering W-12, 1936. Runs great. $2000 obo; Kevin Schindler nnn-nnn-nnnn or xxxx@xxxx.xxx (St Paul OR)

McCormick Deering W-30, 1935. Nice running, driving tractor. Older restoration, second owner, includes original manual. Has one extension rim; Todd Schwartz nnn-nnn-nnnn or xxxx@xxxx.xxx (Vernon B.C.)

Minneapolis Moline R 1939 engine and rear end are stuck. Low production, 108th one built. Good for parts or to restore, $350 firm; Ben Lyon nnn-nnn-nnnn (Gig Harbor WA)

Minneapolis Moline RTU, 1941. New tires, runs, nice paint job, parade ready, $2400 obo; Bob Jordan nnn-nnn-nnnn or xxxx@xxxx.xxx (Gardnerville NV)

Minneapolis-Moline parts counter book holder and books. Parts books and Assembly, Operation and Maintenance manuals covering tractor mowers, mid mounted and trailer, pull combines and self-propelled. UNI-Harvester model LA, various attachments, several Windrowers, Corn shellers, huskers, picker huskers. Forager, Bale-O-Matic, Planter and several types of grain drills, and a hammermill. There also are about 2" of M-M Service Bulletins, practically all of the material is dated in the 1950s. When the books are spread out, the unit is about two and a half feet wide, The books and holder are in very good condition. $125 plus shipping; Dick Lloyd nnn-nnn-nnnn or xxxx@xxxx.xxx (Lewiston ID)

Oliver 77 orchard 52 model, missing some sheet metal. Motor not stuck, 6 cyl gas $1100; Bob Cartwright nnn-nnn-nnnn (Upper Lake CA)

Oliver 880 Industrial, 1961. Has 2440 original hours on hour meter. It starts, runs and drives excellent. Has 20'' front tires and 38'' rear tires. Rear tires and rims are not original, but are in excellent shape. Front and rear tires are poor but hold air. Have set of good used rears to go with it. Has a heavy duty front axle and drawbar. Sheet metal is good. It would make a nice puller. Can be delivered to Tulare Antique Show, $3500 obo; Daniel Morgan nnn-nnn-nnnn xxxx@xxxx.xxx (Onyx CA)

Oliver 990 GM Diesel 1960 twin stick pto and hyd motor stuck needs radiator and exhaust manifold $7200 or trade for John Deere 830 electric start; Mark Parker nnn-nnn-nnnn (Albany OR)

Oliver Hart-Parr 28-44, 1937, predecessor to the Oliver 90, with complete Scout backhoe attachment made by the Shawnee Manufacturing Company of Topeka, KS and hydraulic front end loader. It has approximately 1500 lbs. of iron wheel weights that go too. It was running when parked several years ago, but needs manifold work, $3000 obo; Ryan nnn-nnn-nnnn or xxxx@xxxx.xxx (Ellensburg WA)

Oliver HG 42", partially dismantled by previous owner. Make offer. Would like to sell now! Phone or email for pic's ; Denny Bauman nnn-nnn-nnnn or xxxx@xxxx.xxx (Crescent OR)

Oliver parts for OC3 and OC4 for sale. Please call for list and information; Terry McFarlane nnn-nnn-nnnn (La Pine OR)

Oliver parts: Oliver OC4 gas motor & transmission, $500 each; Bob Qualey nnn-nnn-nnnn (Silverton OR)

Oliver parts: Oliver OC4 gas motor & transmission, $500 each; Bob Qualey nnn-nnn-nnnn (Silverton OR)

Oliver Row-Crop 66 WF, 1953. Runs & drives great. Fully restored in 2002 with new gauges, tires and many other new parts. Beautiful tractor. Will be on display at Tulare Antique Show. $4800 obo; Mike Morgan nnn-nnn-nnnn or xxxx@xxxx.xxx (Onyx CA)

Oliver starters: have 2 used 1365 Oliver Starters, (do not know if they work), $100 for both; Boyd or Nancy Rulifson nnn-nnn-nnnn or Toll Free nnn-nnn-nnnn (Tillamook OR)

Parting out several tractors: Minneapolis Moline M5 diesel. Massey Harris 65 gas. Allis Chalmers Monarch 35 K. Caterpillar 30. Caterpillar 10, mostly castings; Buck nnn-nnn-nnnn (Greenville IL)

Parts for John Deere 2 cylinder crawlers, Oliver OC3 crawlers, cleaning out, will sell all or part. Sheetmetal, finals, engine parts, sprockets, etc; Joe Giordano nnn-nnn-nnnn (Port Orchard WA)

Parts: John Deere two cylinder crawlers and Oliver OC3 crawler parts: sprockets, sheet metal, finals, some engine parts, starters, mags, etc, just lots of misc parts, sell one or all; Joe Giordano nnn-nnn-nnnn (Port Orchard WA)

Rebuilt Sherman combo trans, several new gears, all new bearings & seals, mounting plate for 8N Ford; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)

Rebuilt Sherman step up trans, new bearings & seals, fits Ford 9N-2N-8N Ford; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)

Rims: have two rear steel wheel extension rims for John Deere D, $150; Dennis nnn-nnn-nnnn (Hillsboro OR)

Rims: two rims for Farmall 200 or whatever else they may fit. Rims have never seen chloride, $335 each or make offer. Shipping available; Dale Longhurst nnn-nnn-nnnn (Delta UT)

Rumely Oil Pull W, 1928 lightweight 20-30 hp. Rare, all original, good paint, runs good. In barn since restored. Ran at Calif. State Fair approx. 15 yrs. $25,000; Wayne Percival nnn-nnn-nnnn (Grants Pass OR)

Silver King, 1934, sn 4544, wide front end, runs excellent, was restored in 2010 with new paint, new front tires, 80% rear tires, $5000; Charlie Russell nnn-nnn-nnnn (Edgewood IL)

Struck Mini dozer, bulldozer, haul in back of pickup. Has good undercarriage. Manual angle blade with easy manual up and down. Engine not running and just sitting in machine, easy to work on, uses 8 HP engine. Appears to have new belts, Very neat little unique machine. $1600 Can load ; Joe Giordano nnn-nnn-nnnn (Port Orchard WA)

Tires: 2 ea 13.6-38 6 Ply matching tread 40%. Some weather checking and side wall deterioration but have useful life, $35 each. 2 each 15.5-38 25-30% tread. Tread does not match, $40 ea your choice. 2 each 20.8-38 8ply Firestone 25% tread, $75 for both.; Ken McDonald nnn-nnn-nnnn or xxxx@xxxx.xxx (Vancouver WA)

Tires: 18.4 x 34 rear tractor tires. One Safemark, one Goodyear Dyna Torque. Both about 20%. $100 each or offer.; David Cruickshank nnn-nnn-nnnn (Dayton OR)

Wagner WD9, new tires, good sheet metal, 4 cyl Cummins, call for more info, $10,000; Gene nnn-nnn-nnnn (Davenport WA)

Wagon: farm wagon, John Deere (1955 or 1956?) 16' bed w/side racks, new wheel bearings, new tires, great for parades, $3500; Phil Wall nnn-nnn-nnnn cell or nnn-nnn-nnnn (Enumclaw WA)

Wehr motor grader, Case L powered, heavy 12 ft blade, $2000 obo; Don Kravik nnn-nnn-nnnn (Whitehall MT)

Wheel weights, extra heavy, for Minneapolis Moline M5, $200 pr. Front wheel weight bracket for 4-star, $100. Front Minnie weights, $50 each. Rear wheel weights off of Case V, $200 pr; Buck nnn-nnn-nnnn (Greenville IL)

Wheel: 12-38. 9 lug hub is offset to out edge so buy turning wheel in or out you can go wide or narrow. I have seen this type used on Cockshutt tractors. Good shape for age, $75.; Ken McDonald nnn-nnn-nnnn or xxxx@xxxx.xxx (Vancouver WA)

Wheel: One rear wheel for a John Deere early styled B tractor. Wheel is flat spoked, 36"x8". The hub is a bolt-in hub with 12 splines. I can take it to Salt Lake City where it can be shipped from YRC Trucking Co. $750; Dale Longhurst nnn-nnn-nnnn (Delta UT)

Wheels: Massey Harris 44 skeleton wheels with lugs, some welds, $600; John Deere 12 spline tip toe wheels, some welds, $600; Gene nnn-nnn-nnnn (Davenport WA)

Winch: Hyster winch to fit Cat 30, double drum, best offer; Gene nnn-nnn-nnnn (Davenport WA)

Zetor 8145, bad engine, 4x4, $1000; Boyd or Nancy Rulifson nnn-nnn-nnnn or Toll Free nnn-nnn-nnnn (Tillamook OR)