1950 GMC rolling chassis. Series 350. 248i6, 4 speed trans & 2 speed rear end, $250 cash; Mike nnn-nnn-nnnn (Puyallup WA)
1952 Ford F3 pickup body, sitting on Jeep chassis, $800; Dennis nnn-nnn-nnnn (Hillsboro OR)
1953 International L120 engine & transmission, $100 each; Buck nnn-nnn-nnnn (Greenville IL)
1955 Chevrolet big back window cab & chassis. Clean title, non-op. Has front clip with disc brakes, etc. Truck is all apart. Will need to reassemble, or part out, many good parts, $1000 obo; Ken nnn-nnn-nnnn (Camarillo CA)
1959 GMC wide rear window. Parting out, partially disassembled. No engine or transmission. Many good body parts. Make offer; Ken nnn-nnn-nnnn (Camarillo CA)
1960 Mack B-753 "LT", parting out. It has the Mack ENDLT-673 diesel engine, Triplex 15 speed single overdrive transmission, Mack CRD-91 dual reduction rear axle with 5.07 gear ratio. Also has the "L" type cab. Hoods, fenders & shudders are in outstanding shape. Have a lot more real good parts; Daniel Morgan nnn-nnn-nnnn or xxxx@xxxx.xxx (Onyx CA)
1962 Econoline pickup. 220 6 cyl. looks and runs good, $3200; Robert C Pierce nnn-nnn-nnnn (Omak WA)
1963 Chevy 4-speed transmission with mounted emergency brake out of 1-ton model; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)
1963 GMC, 50K, V6, 4+2, with pto driven hydraulic boom, $3500; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)
1964 Ford Econoline van, good driver, $1600; Dennis nnn-nnn-nnnn (Hillsboro OR)
1964 GMC 4-speed transmission out of 910 model, also grill; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)
1966 Ford F703, 330 cu in, 5+2, has 5th wheel & bumper pull with air or electric brakes, asking $12500; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)
1973 Dodge 800 Series, 413 cu.in. V-8 5+2. Has 5 yard dump. Has swing away front fenders. Very straight and clean. Neat truck, price reduced to $2500 obo; Don Chappell nnn-nnn-nnnn (St Helens OR)
1973 IH, 35K with 5+2 20’ box, asking $4200; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)
1976 Kenworth dual drive with Swartz machinery bed with winch, 351000 original miles, 8V92T engine with 13 speed miles, very nice truck, $32500 or offer; nnn-nnn-nnnn or xxxx@xxxx.xxx (Beavercreek OR)
1988 Peterbilt truck, Cat 378 motor, rebuilt everything including brakes, dual axle; Charlie Parish nnn-nnn-nnnn or John nnn-nnn-nnnn (Merced CA)
Amphibious 6 wheel (coot like) machine 6 wheels, eng. needs repaired, extra set of tires wheels. fiber glass body, tiller steering, $600. See pics at www.newoldiron.wix.com/collectables; Jim Gardner nnn-nnn-nnnn or xxxx@xxxx.xxx (Vernonia OR)
Coot ATV, amphibious 4 wheel drive repowered with10 hp Kohler engine. Has optional propeller and factory rudder and roll bars. Google coot ATV and see U tube videos, $2175; Don Chappell nnn-nnn-nnnn (St Helens OR)
Ford Model T parts, teens to 1925: fenders, hoods cowls, tanks, radiators, some motor & drive train parts, $1000 sold as package, cannot separate, bring trailer; Jim nnn-nnn-nnnn (Benton CA)
Ford truck transmission, 4 speed, at T98-148 on top cover, date code F 9-5, 1950’S, $50; Jerry VanDeWalle nnn-nnn-nnnn (Yamhill OR)
John Deere Gators AMT 600, AMT 626, plus parts machine. All have hydraulic dump beds, $2250 ea obo; Don Chappell nnn-nnn-nnnn (St Helens OR)
License plates: Set of non-commercial 1956 license plates in outstanding condition. There are NO dents or nicks & the plates have a clear title, $315 obo. Also have single and sets of plates from the 1920's to the 1950's; Daniel Morgan nnn-nnn-nnnn or xxxx@xxxx.xxx (Onyx CA)
Long narrow pickup box, no sides, with GMC 1964 tailgate; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)
My customer is wanting to build a 1950 vintage White COE beverage truck. I have already located the truck for them and am now looking for some kind of a beverage box for their project. They plan to have a box built if they cannot find one. That will cost them a chunk of money so I suspect they may be willing to spend quite a sum on an original box and the repair of it. There will be at least a $1,000 finder's fee for anyone who finds a suitable box that I wind up buying for them. See webpage http://www.orcabeverage.com/ for an example; Bob Woodburn nnn-nnn-nnnn (Great Falls MT)
Nice utility truck box, covered with doors, for ¾ or 1 ton truck; Marv nnn-nnn-nnnn (Salem OR)
Red Bug, good original condition. Very rare vehicle, please call for details; Jim nnn-nnn-nnnn (Benton CA)
Samson trucks. I have 2 Samson trucks, one is mostly complete, the other is an engine, radiator, transmission, chassis, and axles. 1 or both trucks would need a full restoration, they are both apart. They are both the 3/4 ton model, $5200; Mr. Kim Kestler nnn-nnn-nnnn (Reno NV)
Wanted: for 1919 White 5 ton truck, need misc parts; Jim Barratt nnn-nnn-nnnn or xxxx@xxxx.xxx (Camas WA)
Wanted: for 1927 International 3/4 ton truck, need Waukesha X engine with useable flywheel and misc parts; Jim Barratt nnn-nnn-nnnn or xxxx@xxxx.xxx (Camas WA)
Wanted: Hemi motor; Charlie Parish nnn-nnn-nnnn (Merced CA)
Wanted: Looking for an exhaust/intake manifold for a Mack EN-401 -or- an EN-402 gas engine. This model of engine was used in the Mack B-42 series trucks; Daniel Morgan nnn-nnn-nnnn or xxxx@xxxx.xxx (Onyx CA)
Wanted: Peterbilt bubble nose truck. Looking for a Peterbilt 280/350 bubble nose cab over truck; Mr. Kim Kestler nnn-nnn-nnnn (Reno NV)
Wanted: VW bus; Charlie Parish nnn-nnn-nnnn (Merced CA)