April 2014 - Engines & Parts For Sale

All Classified Ads

1910 Allan Brothers engine. Side shaft, vertical flyball governor. Call or email for pictures after 9:00 a.m. PST; Rob Skinner nnn-nnn-nnnn or xxxx@xxxx.xxx (La Habra CA)

1913 Root and Vandervoort hit 'n miss stationary engine. Made for the John Deere Plow Company. 4 hp, in excellent running condition. Photos available. $2,500; Ivan Millich nnn-nnn-nnnn or xxxx@xxxx.xxx (Campbell CA)

Associated 4 hp Mule Team, running, Webster mag, hand crank, crank guard. $1700; Mike nnn-nnn-nnnn (Cheney WA)

Atlas Lanova 3 cyl diesel 15 hp engine, rare, $300; Steve Stevens nnn-nnn-nnnn (Medical Lake WA)

Battery coil boxes, have two, $110 each, postage paid in lower 48. 1/2" red oak with box joint corners glued, no nails. You final sand and finish. 12" long, 8" wide, 8" high, as per photo. Call, leave message, phone number to confirm availability; D Combs nnn-nnn-nnnn (Citrus Heights CA)

Copy of original pump jack stud. For 8 cycle Aermotor. Square head, one inch shaft, 3/4 inch left hand thread, $25 each, postage included; Dan Brockman nnn-nnn-nnnn (Chico CA)

Cushman Cub engine, 1-1/2hp with EK mag. Had it running a few weeks ago. On homemade cart, $350; Jim nnn-nnn-nnnn (Tacoma WA)

Economy 6 hp, 1926, restored, runs great a real nice engine, $1400. See pics at www.newoldiron.wix.com/collectables; Jim Gardner nnn-nnn-nnnn or xxxx@xxxx.xxx (Vernonia OR)

Engines: Owned and restored by Marsh Lampe. Located in Central California about 40 miles south of San Jose. Worthington water cooled hit & miss. International Harvester 1-hp Tom Thumb on a cart (circa 1912). Ruston 8 hp air cooled diesel, 1950. I have seen them run; appear to be in good condition. Email me and I will send more info and photos. I don't have pricing for all the engines; Patrick J. Lampe nnn-nnn-nnnn (Hollister CA)

Fairbanks Morse 2 hp Z Dishpan. Complete, running. Type R mag, $650; Mike nnn-nnn-nnnn (Cheney WA)

Fairbanks Morse 3 hp Z, 1920. Original, some paint, Complete in pieces, has AB-33 magneto $900; Mike nnn-nnn-nnnn (Cheney WA)

Fairbanks Morse 6 & 7 hp ZC engine with a Fairbanks Morse water pump, model 2240JFA 25006ph, $2300; Randy Wixsten nnn-nnn-nnnn (Butte MT)

Fairmont railroad speeder car engine. Had it running a few weeks ago. Comes with buzz coil. On skids, $350; Jim nnn-nnn-nnnn (Tacoma WA)

Fuller and Johnson 4 hp N-Kerosene, 1914 (Produced less than a year as a Kero model, switched to a type K, this is a true hit and miss type N.) Has preheater, gear guard, hand crank, etc, $2200; Mike nnn-nnn-nnnn (Cheney WA)

Fuller and Johnson 6 hp N, 1913 (First Year). Complete, original, crank guard, gear guard, hand crank, very nice, $2000; Mike nnn-nnn-nnnn (Cheney WA)

Generator: Old Onan 2cyl. 3000 watt generator. Runs great, have manuals. Sold orig. by Monkey Wards; Bud Davis nnn-nnn-nnnn or xxxx@xxxx.xxx (Arlington WA)

Greene Mfg. Co, Providence, RI. Twin in box frame. Miniature, cylinders size 3" x 4," made by Greene to show his unique quick cut-off mechanism during patent battle against Corliss, who had been granted a patent that covered ALL quick cut-off mechanisms. (Corliss won, but only for a few years, after which Green began to produce. The mechanism has "teeth" that trip other "teeth" to actuate the valves, and they are adjustable.) This relic has been in need of restoration for a long time. It was cannibalized, but fortunately the cannibal left one of everything that needs re-making. Fascinating historical piece for the right guy. Images available, $9000 obo; Pat Spurlock nnn-nnn-nnnn (Portland OR)

Hicks heavy duty marine gas engine, model DY. One cylinder. Complete and operational. No saltwater exposure. Stored dry with light oil. Has reverse, magneto, pumps, and all parts and covers. Original paint. Literature. Images available via web. $5500 obo; Pat Spurlock nnn-nnn-nnnn (Portland OR)

John Deere W, circa 1939. Clutch rebuilt. Looks and runs good. I have the operating manuals as well. Will email info and photos, $5,000; Patrick J. Lampe nnn-nnn-nnnn or xxxx@xxxx.xxx (Hollister CA)

Leroi 2 cylinder, 2P-7 Milwaukie Wisconsin 3-1/2" stroke with 2-7/8" bore. Needs carb & magneto, $200 or make offer; Don Chappell nnn-nnn-nnnn (St Helens OR)

McCormick LA 1-1/2 - 2-1/2 runs good, $275; Bud Davis nnn-nnn-nnnn or xxxx@xxxx.xxx (Arlington WA)

McCormick LB 3-5 hp. Runs good, $375; Bud Davis nnn-nnn-nnnn or xxxx@xxxx.xxx (Arlington WA)

Murphy diesel engine model 11? Big 4 cyl. complete fan to clutch, ran last month, out of a Northwest crane model 25. Includes Murphy radiator. Very good condition, weighs about 5-6000 pounds, $5000 obo; Don Chappell nnn-nnn-nnnn (St Helens OR)

Rare vintage Ellinwood engine, model 44. Is in remarkably good condition. Ran beautifully last time it was run. Photos can be emailed, $450; Don Nelson nnn-nnn-nnnn or xxxx@xxxx.xxx (Paradise CA)

Regal Marine gas engine, 4-6 hp, 4-stroke cycle. Like new with original "regal" blue paint. Seems to have been installed in a boat, telling by set-screw marks on out-put shaft, but not for long. Beautiful brass fittings. Perfect condition; no scratches or wrench tracks. (Hype: Stored under a boat shed bench on Lake Union, Seattle, until purchased by Bill Durham fifty years ago.) With reverse gear, manifold heater, muffler, and propeller, $3500; Pat Spurlock nnn-nnn-nnnn (Portland OR)

Sandwich 1-1/2 hp Tulip Top hit & miss with Webster mag. Mag has just been reconditioned. Has crank guard. Engine is in good condition, $800; Jim nnn-nnn-nnnn (Tacoma WA)

Sattley 1-1/2 hp hit and miss old weld on head, comp. less mag, $250; Bud Davis nnn-nnn-nnnn or xxxx@xxxx.xxx (Arlington WA)

Sattley 1-3/4 hp throttle gov. sn 12778 comp. less mag, $250; Bud Davis nnn-nnn-nnnn or xxxx@xxxx.xxx (Arlington WA)

Three engines, sold as a lot for only $595. 3-1/2 hp Stover, 2 hp Hercules, 2-1/2 hp IHC with water pump & skid. All not running, all 3 have mags, mufflers, carbs. Hercules turns free, the 2 others don’t turn. I may trade for running hit & miss engine; Mike nnn-nnn-nnnn or xxxx@xxxx.xxx (Minden NV)

Tiny Tim generator / battery charger. Very neat, rare setup, $800; Mike nnn-nnn-nnnn (Cheney WA)

Tom Thumb hit & miss on a cart. Great shape. Email for more info and photos, $1200; Patrick J. Lampe nnn-nnn-nnnn or xxxx@xxxx.xxx (Hollister CA)

Vaughn Drag Saw with blade. Needs a buzz coil to run. Looks to be in decent shape. Not sure what to ask for it; Chris nnn-nnn-nnnn (Camano Island WA)

Wisconsin AHH, sn 350416 runs great, $150; Bud Davis nnn-nnn-nnnn or xxxx@xxxx.xxx (Arlington WA)

Wisconsin TFD. Complete, un-stuck, $100; Mike nnn-nnn-nnnn (Cheney WA)

Witte special, throttle gov. sn 97966, comp, less mag, $250; Bud Davis nnn-nnn-nnnn or xxxx@xxxx.xxx (Arlington WA)