January 2014 - Engines & Parts For Sale

All Classified Ads

Associate 2 hp hopper cooled engine. Has good compression, ran good before it was stored. No cart, $950. I can email photos; Jim nnn-nnn-nnnn or xxxx@xxxx.xxx (Tacoma WA)

Associated 3 hp, sn 506063, 1919 3 mule team. Webster mag. Some original paint under the oil and grease. No known cracks, breaks or welds, $1200. Email for pictures and details; Kathy Repp nnn-nnn-nnnn or xxxx@xxxx.xxx (Snohomish WA)

Briggs and Stratton: over 300 B & S small engine parts, new and used, $125 for all; Hardy McFarland nnn-nnn-nnnn (Sutter CA)

Economy 9 hp on drop center frame cart. Restored, $4000 obo; Carroll Pederson nnn-nnn-nnnn (Auburn WA)

Emerson Brantingham 1-1/2 hp H in excellent condition. Barn fresh, original paint. Lunkenheimer Paragon oiler. Original skids and fuel tank. Crank guard only part missing. Very few type H engines exist and one with original finish being very rare. Engine has the name HP, serial no. and speed embossed in raised letters on both sides of hopper with original green paint for background and some yellow paint still on lettering. $1900 Email for pictures and details; Kathy Repp nnn-nnn-nnnn or xxxx@xxxx.xxx (Snohomish WA)

Fairbanks Morse 15 hp tank cooled engine, 1925, on heavy wagon. Cannon style, 44" flywheels, unique water reservoir, $3800, pictures and info available; Terry Christner nnn-nnn-nnnn (Molalla OR)

Fairbanks Morse 15 hp Z tank cooled engine. Mounted on a heavy truck. Good condition, $2500; Dave Itel nnn-nnn-nnnn (Aurora OR)

Fairbanks Morse 7-1/2 hp Z. Not a size that you see very often. Ran good before it was put into storage. Comes on home-made cart. The only weld that I can see is on the crank guard. Good compression. Comes with hand crank, $900. I can email photos; Jim nnn-nnn-nnnn or xxxx@xxxx.xxx (Tacoma WA)

Flywheels: 1 pair flywheels with crank. I think they are for a smaller Associated, $50; Dave Itel nnn-nnn-nnnn (Aurora OR)

Fuller & Johnson 1-1/2 hp. Nice engine, older restoration. Comes with cart. Ran good before it was stored. Has good compression, $750. I can email photos; Jim nnn-nnn-nnnn or xxxx@xxxx.xxx (Tacoma WA)

Fuller & Johnson 3 hp. Has duel fuel mixer. Heavy crown flywheels. Very collectible. No Cracks. Has a weld in the heat exchanger that is on the exhaust. Good compression. Has not been run in the last 4-5 years but did run good before it was put into storage. No cart, $750. I can email photos; Jim nnn-nnn-nnnn or xxxx@xxxx.xxx (Tacoma WA)

Fuller & Johnson 4 hp People's Choice. Very collectible. Comes with low tension coil. Head has old patch that you need to look at closely to see it. No Cart, good compression, last ran 4-5 years ago, $900, I can email photos; Jim nnn-nnn-nnnn or xxxx@xxxx.xxx (Tacoma WA)

Gas engines for sale: Package deal available. I am getting too old for so many toys. Maytag 1923 model 82, restored on skid, $400. Maytag FYED4 on skid, restored, $400. Older Maytag restored on skid. Has battery box, etc, S143 on base, S114 on flywheel, $600. Maytag Eiseman multi-motor model 72D, sn 58895, restored on skid, $600. John Deere 1-1/2 hp E, sn 244555, restored on skid, $900. International Harvester LAA sn 45249 ? to 1-1/2 hp. Good original engine, $400. Briggs & Stratton 20153 model 184706 side plug homemade gen set with Barlow & Selig gen side plug kick start original, $300. Fairbanks Morse 2 hp ZC, self-oiling, older restoration, very nice engine on skid, $800. Briggs & Stratton 6120A #22 side plug kick start, on skid, older restoration, $300. Fairbanks Morse 1-1/2 hp Z, 1923, restored on cart with battery box, etc, $1000. International Harvester 3-5 hp LA, complete, probably runs, needs restoration, $400. You can have it all for $5000. Includes 90% completed show trailer, needs paint, is not r

egistered. Has brakes, lights and new tires. All restorations were professionally done; Gene Insley nnn-nnn-nnnn or nnn-nnn-nnnn (Pahrump NV)

Hercules 5 hp E. Ran good before it was put into storage 3-4 years ago. Has good compression. No crack, one weld on the crank guard. No cart, $1000. I can email photos; Jim nnn-nnn-nnnn or xxxx@xxxx.xxx (Tacoma WA)

John Deere 6 hp early model on nice cart. Runs but needs sleeve, $4,500; Buster nnn-nnn-nnnn (Yuma AZ)

Lauson 2 hp, sn 69168 Type w611. Runs good, tank good, not repainted, $500 or $300 w/out magneto; Bud Davis nnn-nnn-nnnn (Arlington WA)

Leroi 2 cylinder, 2P-7 Milwaukie Wisconsin 3-1/2" stroke with 2-7/8" bore. Needs carb & magneto, $200 or make offer; Don Chappell nnn-nnn-nnnn (St Helens OR)

McCormick LB 1-1/2 to 2-1/2 hp, sn 63239. Runs fine, nothing missing, $350; Bud Davis nnn-nnn-nnnn (Arlington WA)

McCormick LB 3-5 hp runs good, nothing missing, $450; Bud Davis nnn-nnn-nnnn or xxxx@xxxx.xxx (Arlington WA)

Monitor 5 hp, on original, large iron cart, good compression, sn 9986, $3,000. Email for pictures and details; Kathy Repp nnn-nnn-nnnn or xxxx@xxxx.xxx (Snohomish WA)

Murphy diesel engine model 11? Big 4 cyl. complete fan to clutch, ran last month, out of a Northwest crane model 25. Includes Murphy radiator. Very good condition, weighs about 5-6000 pounds, $5000 obo; Don Chappell nnn-nnn-nnnn (St Helens OR)

Rebuilt Briggs & Stratton model 190432 8 hp steel sleeve piston liner; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)

Stickney 7 hp engine, made in 1913, older restoration. This engine has the correct fuel pump and rare clutch pulley assembly. It is sitting on homemade skids and comes with one extra reproduction igniter. I have a forklift to help load it. No trades please, $14,750.; Terry Christner nnn-nnn-nnnn (Molalla OR)

Taylor Vacuum 2 hp, Model C. Runs good, has EK mag. Has vacuum pump. No cart, $700. I can email photos; Jim nnn-nnn-nnnn or xxxx@xxxx.xxx (Tacoma WA)

Three restored hit & miss engines on carts; 1910 4 hp Fairbanks Morse H Jack Of All Trades, sn 97468, $4500; 1913 6 hp F&J N, sn 10490, $3500; 1916 4 hp Stover T, sn 75597, $3500. JD Smith nnn-nnn-nnnn (San Antonio TX)

Vintage Kohler electric plant, hand crank start, magneto ign. 4 cyl gas engine. Good honeycomb radiator still full of antifreeze. Model 1M21, 1.5KVA 115Volt AC single phase 60 cycles 1200 RPM. See video - This is not my machine, but mine looks identical. $450 obo. http://www.youtube.com/watch?v=Om403siE4ro; BrianTate nnn-nnn-nnnn or xxxx@xxxx.xxx (Redmond WA)

Wisconsin AHH, sn 350416, I think 1943. Starts and runs good, needs gas tank, $150; Bud Davis nnn-nnn-nnnn (Arlington WA)

Witte Special. No HP number. Throttle gov. has angle top hopper. Complete less EK mag. Gas tank needs repair, $300; Bud Davis nnn-nnn-nnnn (Arlington WA)