Allis Chalmers B, 1938, with a belly-mount sickle mower, good tires & tin, runs very good, used to cut oat hay last season, $1800; Aubrey Greer nnn-nnn-nnnn (Lompoc CA)
Allis Chalmers B, nice, runs great, a very easy one to restore, $1200; Don Weburg nnn-nnn-nnnn (Arcata CA)
Allis Chalmers Monarch 35 or K belt pulley & attachment, $800; Buck Evans nnn-nnn-nnnn (Greenville IL)
Allis Chalmers WC, 1937, single front with sickle bar belly mower, front & rear 2-row cultivator. Tractor restored, mower & cultivator are not, $2650 obo; Carl Schroeder nnn-nnn-nnnn (Madera CA)
Case 400, 1959. Freeman loader, hydraulics, case-o-matic, $2500, interesting trade may be possible; Warren Harger nnn-nnn-nnnn (Central Point OR)
Case 530 with 3 pt & pto Case-o-Matic with power steering. Gas engine runs very well. Ready to farm or restore, $1600; Don Weburg nnn-nnn-nnnn (Arcata CA)
Case C parting out, call with needs; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Case C, 1929, complete and stuck on cut downs to rubber. 1 has rare flat belt water pump, $750 obo; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Case C, S or R F&H hc245 rear round spoke wheels 9x24, very nice and rare, $500; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Case DI industrial, $400; Hubert Bierly nnn-nnn-nnnn (Bend OR)
Case L, all there. Engine free, tires hold air. I have too many projects, $1200 or trade for John Deere H; Don Weburg nnn-nnn-nnnn (Arcata CA)
Case RC, 1939, older restoration, has new tires, fenders, sunburst grill, $2750; Dave Itel nnn-nnn-nnnn (Aurora OR)
Case S, 1948, needs motor to be rebuilt. Did run 5 years ago, has back blade hyg ram. Pictures are on Reno Nevada Craigs List. $600.; John Calvet nnn-nnn-nnnn or xxxx@xxxx.xxx (Stagecoach/Silversprings NV)
Case S, 1948, wide front, motor turns over, $600; John Calvet nnn-nnn-nnnn (Stagecoach NV)
Case SC, 1953. Good metal, paint oxidized, $1900, trade; Warren Harger nnn-nnn-nnnn (Central Point OR)
Case SC, adjustable wide front, rare. Fresh valve job. Good sheet metal. Needs to be painted. Has hydraulics single valve. $1850 obo; Ken McDonald nnn-nnn-nnnn or xxxx@xxxx.xxx (Vancouver WA)
Case SO, 1947, (orchard model) older restoration. Good sheet metal. New front tires, $1500; James Ward nnn-nnn-nnnn (Medford OR)
Case tractor parts, used, for VA, S, O & LA, and some parts for other Case models. Also have some complete tractors. Call for info; Steve Stevens nnn-nnn-nnnn (Medical Lake WA
Case VAC, 1946. Barn stored all its life. Good tires, tin is straight. Wide front with hyd’s, runs good, $1500; Aubrey Greer nnn-nnn-nnnn (Lompoc CA)
Caterpillar 10 & 15 gas tanks; Don Chappell nnn-nnn-nnnn (St Helens OR)
Caterpillar 10, 20 & 30 parts; Buck Evans nnn-nnn-nnnn (Greenville IL)
Caterpillar 10, sn PT 2413. Standard gauge, runs excellent, steers great, excellent undercarriage, nice tractor, reduced to $3000; Don Chappell nnn-nnn-nnnn (St Helens OR)
Caterpillar D-2. 5J series wide gauge tractor. Tractor runs good, needs a little injector work, have extra injectors. Undercarriage good, $2000; Kim Kestler nnn-nnn-nnnn (Reno NV)
Caterpillar D4 7U39272, direct electric start, 5-roller track frame, 16" pads, all track parts in very good condition. Cat number 4 dozer and toolbar with 2 shanks, front mount hydraulic pump. Engine runs but has water in oil. Steering clutches free, handles are stuck. Tractor & dozer can be separated, $3500 obo; John Strecker nnn-nnn-nnnn (Kingsburg CA)
Caterpillar D4, 1955, 7U30543, Cat dozer, 5 roller track frame, Cat angle dozer, front hyd. Unit , track pins and bushings worn bad. Started last year, but not used for years, $1800; James Sund nnn-nnn-nnnn, eves (Stevensville MT)
Caterpillar D-4. 7J series wide gauge tractor. Tractor runs good, blows some raw oil from exhaust, needs to be worked a little. It has always been dependable, always starts and runs good. Tractor has fair undercarriage. Have an extra radiator that goes with it, $1000; Kim Kestler nnn-nnn-nnnn (Reno NV)
Caterpillar D-4G Dakota dozer blade complete. Blade is in very good condition, hydraulics do not leak down, $100; John Kaijankowski nnn-nnn-nnnn or xxxx@xxxx.xxx (Fort Bragg CA)
Caterpillar large hydraulic rams (2) from a D4-7U front loader. Both for $95. Photos available by internet; Ron Nevins nnn-nnn-nnnn or xxxx@xxxx.xxx (Shingletown CA)
Caterpillar parts: Logging grapple (large rotary), 2 Cat Fifteens, Cat D2, Cat D6-9U, Cat D4-7U rear hydraulics, Cat Twenty-two, Power units D315, D318, Tracks/undercarriages D6C, 931, D3’s, D4D oil cooler, reasonable; Steve Walenty nnn-nnn-nnnn (Uxbridge MA)
Caterpillar PTO unit, complete with control parts for D-2, $250; Jerry VanDeWalle nnn-nnn-nnnn (Yamhill OR)
Caterpillar Twenty parts tractors. I have several PL series twenty standard gauge tractors for parts. No manifolds, carbs, or mags. Call me for your parts needs, and I will see what I have; Kim Kestler nnn-nnn-nnnn (Reno NV)
Cletrac 20 or AG transmission housing and other parts; Don Decker nnn-nnn-nnnn or xxxx@xxxx.xxx (Ridgecrest CA)
Cletrac W, 1919, $5000; Buck Evans nnn-nnn-nnnn (Greenville IL)
Complete BeGe hyd. pump, controls and tank assembly w/PTO shaft for D-2 Cat for rear remotes, reduced to $500; Don Chappell nnn-nnn-nnnn (St Helens OR)
Co-op E-3 for sale; Al Barkl nnn-nnn-nnnn (Elko NV)
County Super Six: early 4X4. Needs engine work (knocks). Hood broken and part missing, 2 piece grill missing. Simms pump with long shaft. Running gear good. Tires good, $2500 obo; Carter Bonney nnn-nnn-nnnn (Woodland CA)
Early double drum LeTourneau control unit specifically made for a Caterpillar Sixty, including drive shaft, $450 obo. Other Sixty and Thirty, 20 and 22 parts; Don Decker nnn-nnn-nnnn (Ridgecrest CA)
Farmall 200 with loader, plow, disc, sickle mower, and blade. Original 2-point fast hitch implements. Very good rubber all around, $3500 for everything; Fred Gilbertson nnn-nnn-nnnn (Creswell OR)
Farmall 350 side panels, center strip; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Farmall A parts now available, see them at www.vintagetractors.com; John Boehm nnn-nnn-nnnn or xxxx@xxxx.xxx (Woodland CA)
Farmall B, 1944. Complete tractor, single front, runs, but has a heating problem, $500; Aubrey Greer nnn-nnn-nnnn (Lompoc CA)
Farmall Cub has hydraulics and sickle bar mower. Very good tires and sheet metal, runs excellent, $2950 obo; Don Chappell nnn-nnn-nnnn (St Helens OR)
Farmall Cub has hydraulics, 12 volt alt. Very good tires, fair sheet metal, runs well, $1950 obo; Don Chappell nnn-nnn-nnnn (St Helens OR)
Farmall Cub loader $400, cultivator parts $50, front or rear blade $50, sickle mower parts, and more; Fred Gilbertson nnn-nnn-nnnn (Creswell OR)
Farmall Cub, 1948-1949, recent restoration, runs and looks great, ready to show, $2900. Email for photos. Free delivery to Turlock or Tulare; John Boehm nnn-nnn-nnnn or xxxx@xxxx.xxx (Woodland CA)
Farmall Cubs, have 2, both are early tractors. The better of the 2 is a 1947, in original unrestored condition, hydraulic lift. It hasn’t run in a couple years and probably could use a good cleaning up. The second tractor is in need of total restoration but is all there. It has a manual lift. I also have a blade, 2 moldboard plows, and a sickle bar mower for these tractors. I have used the sickle bar and it works very well. I would like to get $1700 obo for them; Tom Parker nnn-nnn-nnnn or xxxx@xxxx.xxx (Leaburg OR)
Farmall F-14 rear end with hydraulic pump frame rails, front wheel, no rear wheels, $400 obo; John Strecker nnn-nnn-nnnn (Kingsburg CA)
Farmall F-20, 1939, Completely original, good running, farm fresh tractor on good rubber. Pictures available. I could haul it to the Turlock Swap Meet in March. $1,600; Bob Currie nnn-nnn-nnnn or xxxx@xxxx.xxx (Greenwood CA)
Farmall H 1947, fair condition, $800; Johnnie Everitt nnn-nnn-nnnn (Ridgefield WA)
Farmall H, 1949, wide front, good tin, runs good, used to bale hay, $2200; Aubrey Greer nnn-nnn-nnnn (Lompoc CA)
Farmall SMTA, 1954. Power steering, excellent running, all new rubber; Al Barkl nnn-nnn-nnnn (Elko NV)
Farmall Super H, 1954. Farmall SMTA 1954, McCormick #31 mower, 7 ft bar, Co-oP E-3, 1946; Al Barkl nnn-nnn-nnnn (Elko NV)
Farmall Super H, 1954. New sleeves & piston. Excellent running condition, new paint & decals; Al Barkl nnn-nnn-nnnn (Elko NV)
Farmall Super M motor & shifter, stuck, great project, $750; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Ford 2N front end loader complete, $100; John Kaijankowski nnn-nnn-nnnn or xxxx@xxxx.xxx (Fort Bragg CA)
Ford 2N ready to work, new sleve kit, 12 volt system, many new parts $ 2800; Jody Stover nnn-nnn-nnnn or xxxx@xxxx.xxx (Grass Valley CA)
Ford 8N 9N parts: belt pulley $50, cradle mount generator $50, manifold $35, fender mount tool box $15, 8N battery lolder $15, 13.6 X 28 tire (no wheel) $85, fan & water pump $35, side mount distributor $35; Fred Gilbertson nnn-nnn-nnnn or xxxx@xxxx.xxx (Creswell OR)
Ford 8N, 1952. All original except 12v electrical system. Excellent sheet metal, lights, front & rear wheel weights, stabilizer kit. Good rubber, $2250 firm; Carl Schroeder nnn-nnn-nnnn (Madera CA)
Ford 8N, late model, has side mount distributor and factory tach. Sheet metal straight. Decent rear tires, could use better fronts. Needs new battery and tune-up. Selling as is before it goes into the shop, $1250; Don Chappell nnn-nnn-nnnn (St Helens OR)
Ford 8N, serial number 177. This is a 1947, one of the first of over 500,000 8N's. This tractor is totally restored. Has factory front bumper, headlights, rear work light and factory tail light-all rebuilt. New radiator, wiring harness, gauges, water pump, battery, etc. Has the original Firestone 10x28 tires with excellent tread and 4x19 fronts (original) Much more. Come see- make offer; Don Chappell nnn-nnn-nnnn (St Helens OR)
Ford 8N-9N miscellaneous parts; Al Norwood nnn-nnn-nnnn or nnn-nnn-nnnn (Indio CA)
Ford tractor engines, have three 172 cu. in. engines. One new rebuilt with pulling cam, $2000. One strong running take out, $800. One Industrial engine including starter, generator, air cleaner radiator (swather take out), $500; Norm Keesler nnn-nnn-nnnn or xxxx@xxxx.xxx (Nampa ID)
Ford tractor parts, new and used; Jody nnn-nnn-nnnn (Grass Valley CA)
Fordson parts: Rare drag line double drum winch fits the American Fordson tractor. Also other Fordson parts including fenders and nice steel rear wheels with grousers; Don Decker nnn-nnn-nnnn (Ridgecrest CA)
Head (rebuilt) for big bore John Deere GP tractor; Dave Gallant nnn-nnn-nnnn (Boring OR)
International 350 Hi-Utility Rare 800 built gas runs 2000 hrs. fast hitch 1 hyd. remote all lights, $1500; Mark Parker nnn-nnn-nnnn (Lebanon OR)
International 684, 4-wheel drive, 4-cylinder diesel, manual transmission, category II 3-point hitch, (3) auxiliary hydraulic valves, live PTO, very good front tires, rear tires aren't much. This is a beefy, reliable farm/ranch tractor, very hard to find in 4-wheel drive! I added a very heavy front weight. I do not know real hours, as the tach has not worked for a long time; but this is a late '70s, early '80s tractor, and I have owned it for 19 years. Serial # is 2947. $8,500. Also have an extreme-duty Servis Rhino 72" Gyro 3-point double-blade hopper/mower/mulcher, $1100; Richard nnn-nnn-nnnn or xxxx@xxxx.xxx (Geyserville CA)
International A, good paint and condition, $1500; Dick Good nnn-nnn-nnnn (Tangent OR)
International TD6 motor parts block head; Mark Parker nnn-nnn-nnnn (Lebanon OR)
International TD-6 Parts...New & Used. New: Rollers, valves, sleeves & pistons. Used: Track chains, rollers, sprockets, idlers, engine clutches, steering clutches, gears, shafts & final drives. Have acquired many parts, too numerous to list. E-mail your requests or questions (include your phone number) with RE:"Tractor Parts" to xxxx@xxxx.xxx or phone: Steve Flynn nnn-nnn-nnnn (Calistoga CA)
John Deere (have 3): 1945 H, 1949 B, 1959 B. All with tricycle front, good paint, all run well, $1895 & up; Al Norwood nnn-nnn-nnnn or nnn-nnn-nnnn (Indio CA)
John Deere 40 and M engines and engine parts; Don Decker nnn-nnn-nnnn (Ridgecrest CA)
John Deere 40S, 1953? with or without front end loader. Operators manual, service manual, parts catalog, $1700 without loader. $1900 with loader. Nice tractor! May deliver; David Wall nnn-nnn-nnnn (Corning CA)
John Deere 420 crawler finals, $250 each; Dick Good nnn-nnn-nnnn (Tangent OR)
John Deere 420 crawler, sn 94520. 1650 original hours. Runs great. Originally an orchard crawler. Has inside track blade & drum installed. Track and metal in excellent condition. The left rear drive bearing is bad. Can be loaded onto trailer. When bearing is repaired, this it time to restore the crawler. Not much work is required. $3850 as is; Jim or Bill nnn-nnn-nnnn, lv msg (Centralia WA)
John Deere 420 U w/loader 3pt need tranny work, $1650; Dick Good nnn-nnn-nnnn (Tangent OR)
John Deere 440 crawler parts: 2 cyl diesel eng $1500 obo; reverser $400; tranny and rear end $400; Dick Good nnn-nnn-nnnn (Tangent OR)
John Deere 450 parts, reasonable; Steve Walenty nnn-nnn-nnnn (Uxbridge MA)
John Deere 60 parted out, lots left: crank, block, head, flywheel, grill, hood, governor, long rear axles, plus misc. parts, call with needs; Mark Parker nnn-nnn-nnnn (Lebanon OR)
John Deere 70 all fuel, 1953, sn 7000902, very good condition. New tries & tubes, radiator, water pump, belt, lights, wiring with fuses, seat bottom & back, clutch cover, gauges, switch, dash lite, valve job, rebuilt carb, plugs- points-condenser-wires, steering wheel, battery & cables, paint & decals, umbrella & mount, new bushings in Roll-o-Matic, new fly wheel & starter ring, bendix, starter brushes. Has alternator 12v negative ground, clutches good, brakes good, hydraulic good, PTO is good, 3 point is a 801, has the hanger for remote hydraulic cylinder, $7000; Roger C. Bronn nnn-nnn-nnnn or xxxx@xxxx.xxx (Canby OR)
John Deere 70 Diesel Standard, $5000; Bruce Petty nnn-nnn-nnnn, or Harvey Dale nnn-nnn-nnnn (Lewiston ID)
John Deere 840 with Hancock scraper, new driver tires, runs good, $6550; Orman Haenggi nnn-nnn-nnnn (East Nicolaus CA)
John Deere A, NOS clutch pulley, $300; Buck Evans nnn-nnn-nnnn (Greenville IL)
John Deere A, sn 529115, 1944. Nice war model with John Deere mechanic installed electric start. No generator. Located in MT, $1500. Very nice running tractor. Email with questions or to request photos; Jim Pomajevich nnn-nnn-nnnn or xxxx@xxxx.xxx (Vancouver WA)
John Deere AO, 1945 parts tractor, not complete. Engine free, lots of good parts, $395; Dave Itel nnn-nnn-nnnn (Aurora OR)
John Deere AR, 1948, sn 268524, very good shape, $4000 obo; Mike Watkins nnn-nnn-nnnn or xxxx@xxxx.xxx (Kingston WA)
John Deere B 38 inch painted pressed steel rims with new 11.2 x 38 tires. $1000 firm. Email with questions or to request photos; Jim Pomajevich nnn-nnn-nnnn or xxxx@xxxx.xxx (Vancouver WA)
John Deere B, 1936, sn 20258, spoked wheels looks and runs great, $4000; Mike Watkins nnn-nnn-nnnn or xxxx@xxxx.xxx (Kingston WA)
John Deere B, 1938, on spokes, rebuilt engine, $4250; Don Chappell nnn-nnn-nnnn (St Helens OR)
John Deere B, 1939 part: head, block, pistons, complete assembly, $500. Complete radiator, $300; Don Chappell nnn-nnn-nnnn (St Helens OR)
John Deere B, 1939, sn 66195, good runner, factory correct flat spokes, new rear tires, mounted plows, nice original, hand start. Located in MT, available for pickup in May, $4250. Email with questions or to request photos; Jim Pomajevich nnn-nnn-nnnn or xxxx@xxxx.xxx (Vancouver WA)
John Deere B, 1948 Roll-o-Matic, engine rebuilt to 45 over, pro rebuilt mag and starting motor. Rebuilt carb. 12 Volt with alternator. Tranny quiet, everything works. Sheet metal good except needs hood patch and paint, no rust or dents. Tires hold air. Good tag. $1,600; LeRoy Schoot nnn-nnn-nnnn or xxxx@xxxx.xxx (Goldendale WA)
John Deere B,1943, hand start on steel, w/rubber tread, rebuilt engine, fan shaft, seals and bearings throughout, body shop paint. Starts and runs good, $4500. Pictures available; Dave Wattenbarger nnn-nnn-nnnn or xxxx@xxxx.xxx (Bonners Ferry ID)
John Deere B. Good sheet metal, good paint, needs rear tire, wide front end, $2000; Warren Harger nnn-nnn-nnnn (Central Point OR)
John Deere belt pulley for L or LA, needs rebuilding, $75; Dave Itel nnn-nnn-nnnn (Aurora OR)
John Deere BNH, 1947, with spoked 40 inch rear wheels and spoke front wheel. Only 448 styled BNH's made, complete, stuck, needs tires, $4500. Email for photos. Free delivery to Turlock or Tulare; John Boehm nnn-nnn-nnnn or xxxx@xxxx.xxx (Woodland CA)
John Deere BO, 1941, sn 332074. Nice original hand start, large block, $3750. Email with questions or to request photos; Jim Pomajevich nnn-nnn-nnnn or xxxx@xxxx.xxx (Vancouver WA)
John Deere BO, 1946, sn 335642. Electric start, turning brakes, new fenders, $3750. Currently has BR modified air cleaner. Email with questions or to request photos; Jim Pomajevich nnn-nnn-nnnn or xxxx@xxxx.xxx (Vancouver WA)
John Deere BO, electric start very nice, $5000; Don Chappell nnn-nnn-nnnn (St Helens OR)
John Deere BO, hand start, $3250; Dick Good nnn-nnn-nnnn (Tangent OR)
John Deere Duplex carburetor, DLTX109UA, JD#AR50347, New Old Stock, $250; Steve nnn-nnn-nnnn (Stockton CA)
John Deere Early A and AR magneto Fairbanks Morse DRV2A, rebuilt in great condition, $600; Mark Parker nnn-nnn-nnnn (Lebanon OR)
John Deere G 42" pair of hubs and rings, cast discs and rims with one mounted tire and tube; Dick Lloyd nnn-nnn-nnnn (Lewiston ID)
John Deere G, $2500; Bruce Petty nnn-nnn-nnnn or Harvey Dale nnn-nnn-nnnn (Lewiston ID)
John Deere G, 1948, ROM, very good sheet metal, little paint, tires 50%, rebuilt starter, mag, carb, fan shaft. All fluids changed, $2750; Dave Wattenbarger nnn-nnn-nnnn (Bonners Ferry ID)
John Deere G, 1951. Runs, single front wheel with 800 series 3 point hitch, $2150. I also have R-O-M and/or wide front end for sale with this tractor; Merf Hixson nnn-nnn-nnnn (Hemet CA)
John Deere H, 1941, recent restoration, runs and looks great, ready to show, $4250. Email for photos. Free delivery to Turlock or Tulare; John Boehm nnn-nnn-nnnn or xxxx@xxxx.xxx (Woodland CA)
John Deere H, 1941, sn 21901. Nice original tractor, new brakes, hand start, runs well. Older but serviceable tires, $3500. Email with questions or to request photos; Jim Pomajevich nnn-nnn-nnnn or xxxx@xxxx.xxx (Vancouver WA)
John Deere H, 1946, electric start, restored, very nice, reduced to $3500; Don Chappell nnn-nnn-nnnn or cell nnn-nnn-nnnn (St Helens OR)
John Deere H, electric start, runs good, $3970; Don Chappell nnn-nnn-nnnn (St Helens OR)
John Deere HWH hubs, $3000. Bought these reproduction hubs for my HWH to install duals. Very good castings. Perfect fit. Lost interest. Email with questions or to request photos; Jim Pomajevich nnn-nnn-nnnn or xxxx@xxxx.xxx (Vancouver WA)
John Deere L engine, electric start, clutch, (needs front cylinder sleeved), $200; Buck Evans nnn-nnn-nnnn (Greenville IL)
John Deere L, 1940 (?). Engine turns over. Had it running a few years ago but has low compression. Most of the sheet metal is in pretty good shape except driveshaft cover, $1200 obo; Bob Stere nnn-nnn-nnnn or xxxx@xxxx.xxx (Sherwood OR)
John Deere LA parts: 2 rear wheels with tires, set of fenders, tranny, other misc parts -no engine. Will take to Turlock CA swap meet Mar 10th; Frank nnn-nnn-nnnn (Morgan Hill CA)
John Deere LA, 1941. Restored, starts and runs Great! S/N 2951 but tag is not on tractor. $3900; price is firm. Can email photos to serious buyers; Jim nnn-nnn-nnnn or xxxx@xxxx.xxx (Prescott Valley AZ)
John Deere LA, elec start, all original, $2750; Dick Good nnn-nnn-nnnn (Tangent OR)
John Deere M, 1948, recent restoration, runs and looks great, ready to show, $3500. Email for photos. Free delivery to Turlock or Tulare; John Boehm nnn-nnn-nnnn or xxxx@xxxx.xxx (Woodland CA)
John Deere M, 1950, sn 41300, very nice original tractor. Has mounted M-20 mower. Tractor located in Montana, $2850; Email with questions or to request photos Jim Pomajevich nnn-nnn-nnnn or xxxx@xxxx.xxx (Vancouver WA)
John Deere MC dozer blade depth shoe MC 100. Part no. ADZ 2329 YC SUB FOR ADZ2229YC. Ever wonder what those protuberances on the back of your MC blade were for? Part of them are to accommodate this depth control shoe. Please email for photos or if you have questions. $125 Jim Pomajevich nnn-nnn-nnnn or xxxx@xxxx.xxx (Vancouver WA)
John Deere MC, 1951, sn 13643. Interesting crawler from the Napa Valley. Equipped with a roll cage, heavy duty air cleaner and strengthened final drive housing. Christian Brother Winery tractor equipped to comply with CA OSHA rules. Good metal, runs well, $2950. Email with questions or to request photos; Jim Pomajevich nnn-nnn-nnnn or xxxx@xxxx.xxx (Vancouver WA)
John Deere MC, totally restored, as new, $5000; Don Chappell nnn-nnn-nnnn (St Helens OR)
John Deere MI. Your choice of four from $4500. All have new drawbars, repaired fenders with new brackets and supports as needed. 1950, #10079, $6500, in Montana, needs gauges, nearly complete, new turf tires, new front tires. 1951 #10628 runs, in Montana, nearly complete, missing M1258T lift arm, gauges, $4500. 1952 #10711 in Montana, restored, painted, complete $7500. 1952 #11003 restoring, complete engine rebuild, all new tires, not painted $7500 in WA. One of these has to go. Make an offer. Also have MI-7 mower nearly complete with a tractor only at $450. Reproduction MI drawbar $275. Email with questions or to request photos; Jim Pomajevich nnn-nnn-nnnn or xxxx@xxxx.xxx (Vancouver WA)
John Deere rebuilt 12-v starter for a 1947-56 JD 60 or A tractor, Delco #1108950, JD#TY1436, $250. No core; Steve nnn-nnn-nnnn (Stockton CA)
John Deere styled AR, AO, 60, 620 tractor parts: Very nice hood/fuel tank/baffles, $200; good 11-26 rear rim, $100; decent rear fenders, $200; AR-O engine parts. email for needs; Jake Winn nnn-nnn-nnnn or xxxx@xxxx.xxx (Albany OR)
John Deere: B head, B block, other styled A and B parts, some G and H parts. Call for needs; Dave Wattenbarger nnn-nnn-nnnn (Bonners Ferry ID)
Massey Harris 101 Jr. Standard, runs, needs side panels, $750; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Massey Harris 44, 1949. Tin pretty good with very light surface rust, $750; Warren Harger nnn-nnn-nnnn (Central Point OR)