Allis Chalmers Monarch 35 or K belt pulley & attachment, $800; Buck Evans nnn-nnn-nnnn (Greenville IL)
Allis Chalmers WC, 1937, single front with sickle bar belly mower, front & rear 2-row cultivator. Tractor restored, mower & cultivator are not, $2650 obo; Carl Schroeder nnn-nnn-nnnn (Madera CA)
Allis Chalmers WD, 1952, all new tires, restored 5 years ago, looks great, runs great, $3300; Lon Sisson nnn-nnn-nnnn or nnn-nnn-nnnn (Sebastapol CA)
Case 400, 1959. Freeman loader, hydraulics, case-o-matic, $2500, interesting trade may be possible; Warren Harger nnn-nnn-nnnn (Central Point OR)
Case C parting out, call with needs; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Case C, 1929, complete and stuck on cut downs to rubber. 1 has rare flat belt water pump, $750 obo; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Case C, S or R F&H hc245 rear round spoke wheels 9x24, very nice and rare, $500; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Case CI, 1934, restored, tires like new, new rings, manifold, needs water pump, $2300 obo; Lon Sisson nnn-nnn-nnnn or nnn-nnn-nnnn (Sebastapol CA)
Case S, 1948, needs motor to be rebuilt. Did run 5 years ago, has back blade hyg ram. Pictures are on Reno Nevada Craigs List. $600.; John Calvet nnn-nnn-nnnn or xxxx@xxxx.xxx (Stagecoach/Silversprings NV)
Case SC, 1953. Good metal, paint oxidized, $1900, trade; Warren Harger nnn-nnn-nnnn (Central Point OR)
Case SC, adjustable wide front, rare. Fresh valve job. Good sheet metal. Needs to be painted. Has hydraulics single valve. $1850 obo; Ken McDonald nnn-nnn-nnnn or xxxx@xxxx.xxx (Vancouver WA)
Case SO, 1950, older restoration, tires good, runs but needs rings, $1500; Lon Sisson nnn-nnn-nnnn or nnn-nnn-nnnn (Sebastapol CA)
Case tractor parts, used, for VA, S, O & LA, and some parts for other Case models. Also have some complete tractors. Call for info; Steve Stevens nnn-nnn-nnnn (Medical Lake WA
Caterpillar 10 & 15 gas tanks; Don Chappell nnn-nnn-nnnn (St Helens OR)
Caterpillar 10, sn PT 2413. Standard gauge, runs excellent, steers great, excellent undercarriage, nice tractor, reduced to $3000; Don Chappell nnn-nnn-nnnn (St Helens OR)
Caterpillar 15’s, have two: PV7430, PV575 both run, good UC, needs restoration, your choice $1950. Check our web site www.omnitrac.com. Dennis Wilkinson nnn-nnn-nnnn or xxxx@xxxx.xxx (Cove OR)
Caterpillar 22, sn 2F-7100W, stored inside, clean, stuck, reduced to $1250; Bob Qualey nnn-nnn-nnnn (Silverton OR)
Caterpillar Carburetors for sale: 2 ea Ensign AEL for Cat 20, 2 ea Ensign AAE all brass for Cat 60, 1 ea Ensign AAE for Cat 60 with standard bowl, 2 ea Zenith K5A for Cat 22, 1 ea Ensign AEL for Cat 30, 1 ea fuel pump for Cat 22. All rebuilt Check our web site www.omnitrac.com. Dennis Wilkinson nnn-nnn-nnnn or xxxx@xxxx.xxx (Cove OR)
Caterpillar D2-5U with Holt straight dozer, electric start pony, runs excellent, good UC, $2750. Check our web site www.omnitrac.com. Dennis Wilkinson nnn-nnn-nnnn or xxxx@xxxx.xxx (Cove OR)
Caterpillar D4, 1955, 7U30543, Cat dozer, 5 roller track frame, Cat angle dozer, front hyd. Unit , track pins and bushings worn bad. Started last year, but not used for years, $1800; James Sund nnn-nnn-nnnn, eves (Stevensville MT)
Caterpillar large hydraulic rams (2) from a D4-7U front loader. Both for $95. Photos available by internet; Ron Nevins nnn-nnn-nnnn or xxxx@xxxx.xxx (Shingletown CA)
Caterpillar PTO unit, complete with control parts for D-2, $250; Jerry VanDeWalle nnn-nnn-nnnn (Yamhill OR)
Caterpillar RD4 4G2780 with toolbar dozer runs good, blade needs a little TLC, $1500. Check our web site www.omnitrac.com. Dennis Wilkinson nnn-nnn-nnnn or xxxx@xxxx.xxx (Cove OR)
Caterpillar tractors Cat 15 thru 65, some restored, some ready to restore. All tractors are being discounted as much as 50%. If you want a collector tractor now is the time. Check our web site www.omnitrac.com. Email xxxx@xxxx.xxx, or call for a discounted price; Dennis Wilkinson nnn-nnn-nnnn or xxxx@xxxx.xxx (Cove OR)
Cletrac 20 or AG transmission housing and other parts; Don Decker nnn-nnn-nnnn or xxxx@xxxx.xxx (Ridgecrest CA)
Cletrac W, 1919, $5000; Buck Evans nnn-nnn-nnnn (Greenville IL)
Complete BeGe hyd. pump, controls and tank assembly w/PTO shaft for D-2 Cat for rear remotes, reduced to $500; Don Chappell nnn-nnn-nnnn (St Helens OR)
Co-op E-3 for sale; Al Barkl nnn-nnn-nnnn (Elko NV)
DECALS: The correct valve cover, oil filter, fuel mixture, and now the correct air cleaner decal for the unstyled McCormick and Farmall tractors, 1940 and older. These decals are commercial grade vinyl that are oil and gasoline resistant. They apply to the 10-20, 15-30, 22-36, Regular, T-series, F-series, and W-series tractors. I'll pay the postage; $5 each or the set of four, $18; Bob Currie nnn-nnn-nnnn or xxxx@xxxx.xxx (Greenwood CA)
Early double drum LeTourneau control unit specifically made for a Caterpillar Sixty, including drive shaft, $450 obo. Other Sixty and Thirty, 20 and 22 parts; Don Decker nnn-nnn-nnnn (Ridgecrest CA)
Farmall 350 side panels, center strip; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Farmall Cub parts: Wagner Cub loader complete $400; cultivator $50; mounting plate and arm for rear lift $25; 6V generator $50; Fred Gilbertson nnn-nnn-nnnn or xxxx@xxxx.xxx (Creswell OR)
Farmall Cub, 1948-1949, recent restoration, runs and looks great, ready to show, $2900. Email for photos. Free delivery to Turlock or Tulare; John Boehm nnn-nnn-nnnn or xxxx@xxxx.xxx (Woodland CA)
Farmall Cubs, have 2, both are early tractors. The better of the 2 is a 1947, in original unrestored condition, hydraulic lift. It hasn’t run in a couple years and probably could use a good cleaning up. The second tractor is in need of total restoration but is all there. It has a manual lift. I also have a blade, 2 moldboard plows, and a sickle bar mower for these tractors. I have used the sickle bar and it works very well. I would like to get $1700 obo for them; Tom Parker nnn-nnn-nnnn or xxxx@xxxx.xxx (Leaburg OR)
Farmall SMTA, 1954. Power steering, excellent running, all new rubber; Al Barkl nnn-nnn-nnnn (Elko NV)
Farmall Super H, 1954. New sleeves & piston. Excellent running condition, new paint & decals; Al Barkl nnn-nnn-nnnn (Elko NV)
Farmall Super M motor & shifter, stuck, great project, $750; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Ferguson, pto, mower, loader, post hole digger, scraper, weights, perfect, $3000; Bud Johnson nnn-nnn-nnnn (San Jose CA) [link to photo]
Ford 2N ready to work, new sleve kit, 12 volt system, many new parts $ 2800; Jody Stover nnn-nnn-nnnn or xxxx@xxxx.xxx (Grass Valley CA)
Ford 2N, 1943. Fresh valve jobs, rebuilt magneto, new tires and 12 volt starting. Ready to work or restore, $1195; Lee deVries nnn-nnn-nnnn (Crawfordsville OR)
Ford 8N - one 11x28 rear rim, adjustable in width, $50; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)
Ford 8N 9N parts: belt pulley $50, cradle mount generator $50, manifold $35, fender mount tool box $15, 8N battery lolder $15, 13.6 X 28 tire (no wheel) $85, fan & water pump $35, side mount distributor $35; Fred Gilbertson nnn-nnn-nnnn or xxxx@xxxx.xxx (Creswell OR)
Ford 8N motor, sn 89310479. Not stuck, turns over; Joseph Brick nnn-nnn-nnnn (Klamath Falls OR)
Ford 8N, 1949, sn 157349. Engine rebuilt, other parts reconditioned. Willing to take your tired 8N on trade, plus cash. Present rear tires weather-checked so keep your rear tires on exchange if in better condition. Not a show tractor; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)
Ford 8N, 1952. All original except 12v electrical system. Excellent sheet metal, lights, front & rear wheel weights, stabilizer kit. Good rubber, $2250 firm; Carl Schroeder nnn-nnn-nnnn (Madera CA)
Ford 8N, late model, has side mount distributor and factory tach. Sheet metal straight. Decent rear tires, could use better fronts. Needs new battery and tune-up. Selling as is before it goes into the shop, $1250; Don Chappell nnn-nnn-nnnn (St Helens OR)
Ford 8N, series #177 makes this a 1947, one of the first of over 500,000 8N's. This tractor is totally restored. Has factory front bumper, headlights, rear work light and factory tail light-all rebuilt. New radiator, wiring harness, gauges, water pump, battery, etc. Has the original Firestone 10x28 tires with excellent tread and 4x19 fronts (original) Much more-come see-make offer. Don Chappell nnn-nnn-nnnn (St Helens OR)
Ford 8N-9N miscellaneous parts; Al Norwood nnn-nnn-nnnn or nnn-nnn-nnnn (Indio CA)
Ford 9N orchard model. tractor runs, 3 pt not working, has orchard fenders, original tool box, Ford emblem, pat. emblem asking $2400 or trade? for other steel wheel tractor? Can email pics; Dennis Rutherford nnn-nnn-nnnn or xxxx@xxxx.xxx (Norco CA)
Ford 9N-2N-8N parts: Air cleaner, $45; Cyl head, $70; Distributor with coil & cap, $90; Hardy McFarland nnn-nnn-nnnn (Sutter CA)
Ford Ferguson 52-54?, 4 cyl overhead gas, 1/2 yd front bucket (750lb), pto, 3 pt hitch, good tires, extra wheel, 1 wheel weight, $1000; Richard Beloit nnn-nnn-nnnn (Palo Cedro CA)
Ford tractor parts, new and used; Jody nnn-nnn-nnnn (Grass Valley CA)
Fordson F 1920 with Ferguson single 16 wheeless mounted plow. Runs, looks and drives good, wheels banded for parades. with front mount buzz saw frame & belt pulley & extra parts, $4150; E. Phillips nnn-nnn-nnnn (Coquille OR)
Fordson parts: Rare drag line double drum winch fits the American Fordson tractor. Also other Fordson parts including fenders and nice steel rear wheels with grousers; Don Decker nnn-nnn-nnnn (Ridgecrest CA)
International 350 Hi-Utility Rare 800 built gas runs 2000 hrs. fast hitch 1 hyd. remote all lights, $1500; Mark Parker nnn-nnn-nnnn (Lebanon OR)
International 684, 4-wheel drive, 4-cylinder diesel, manual transmission, category II 3-point hitch, (3) auxiliary hydraulic valves, live PTO, very good front tires, rear tires aren't much. This is a beefy, reliable farm/ranch tractor, very hard to find in 4-wheel drive! I added a very heavy front weight. I do not know real hours, as the tach has not worked for a long time; but this is a late '70s, early '80s tractor, and I have owned it for 19 years. Serial # is 2947. $8,500. Also have an extreme-duty Servis Rhino 72" Gyro 3-point double-blade hopper/mower/mulcher, $1100; Richard nnn-nnn-nnnn or xxxx@xxxx.xxx (Geyserville CA)
International A, good paint and condition, $1500; Dick Good nnn-nnn-nnnn (Tangent OR)
International TD6 motor parts block head; Mark Parker nnn-nnn-nnnn (Lebanon OR)
International TD6 orchard tail seat, runs good, steers good, tinware is nice and straight. Good undercarriage, has hydraulics and one remote, $5,000; Dennis Gullick nnn-nnn-nnnn (Redwood Valley CA)
International TD-6 Parts...New & Used. New: Rollers, valves, sleeves & pistons. Used: Track chains, rollers, sprockets, idlers, engine clutches, steering clutches, gears, shafts & final drives. Have acquired many parts, too numerous to list. E-mail your requests or questions (include your phone number) with RE:"Tractor Parts" to xxxx@xxxx.xxx or phone: Steve Flynn nnn-nnn-nnnn (Calistoga CA)
John Deere (have 3): 1945 H, 1949 B, 1959 B. All with tricycle front, good paint, all run well, $1895 & up; Al Norwood nnn-nnn-nnnn or nnn-nnn-nnnn (Indio CA)
John Deere 1010, 1964, sn 1010U-46960. Has dual tires in the rear, pto, 7ft. blade. 36 Hp 4 Cyl. 5ft. Bucket loader in front. Cage over driver seat. Original paint color of orange. This tractor worked well, but did not have anti-freeze in radiator past winter, now water in oil, will run with some encouragement. Possible/probable cracked ?, $1800; Mike nnn-nnn-nnnn (Auburn WA)
John Deere 40 and M engines and engine parts; Don Decker nnn-nnn-nnnn (Ridgecrest CA)
John Deere 40S, 1953? with or without front end loader. Operators manual, service manual, parts catalog, $1700 without loader. $1900 with loader. Nice tractor! May deliver; David Wall nnn-nnn-nnnn (Corning CA)
John Deere 420 crawler finals, $250 each; Dick Good nnn-nnn-nnnn (Tangent OR)
John Deere 420 U w/loader 3pt need tranny work, $1650; Dick Good nnn-nnn-nnnn (Tangent OR)
John Deere 440 CI with blade, good shape, $5,000; Jerry Isakson nnn-nnn-nnnn (Sandy OR)
John Deere 440 crawler parts: 2 cyl diesel eng $1500 obo; reverser $400; tranny and rear end $400; Dick Good nnn-nnn-nnnn (Tangent OR)
John Deere 5010 rebuilt pump excellent runner, $5000. John Deere 730 diesel electric start, wide front good tractor used for baling, $5000. I have over 100 restorable tractors of most makes. E-mail me with your wants I may have it. Prefer to sell whole tractors; Jerry Nash nnn-nnn-nnnn (Bridger MT)
John Deere 60 parted out, lots left: crank, block, head, flywheel, grill, hood, governor, long rear axles, plus misc. parts, call with needs; Mark Parker nnn-nnn-nnnn (Lebanon OR)
John Deere A clutch pulley, New Old Stock, $300; Buck nnn-nnn-nnnn (Greenville IL)
John Deere AO, 1953, electric start, totally restored, $3000; Don Chappell nnn-nnn-nnnn (St Helens OR)
John Deere B, 1938, on spokes, rebuilt engine, $4250; Don Chappell nnn-nnn-nnnn (St Helens OR)
John Deere B, 1939 part: head, block, pistons, complete assembly, $500. Complete radiator, $300; Don Chappell nnn-nnn-nnnn (St Helens OR)
John Deere B. Good sheet metal, good paint, needs rear tire, wide front end, $2000; Warren Harger nnn-nnn-nnnn (Central Point OR)
John Deere BNH, 1947, with spoked 40 inch rear wheels and spoke front wheel. Only 448 styled BNH's made, complete, stuck, needs tires, $4500. Email for photos. Free delivery to Turlock or Tulare; John Boehm nnn-nnn-nnnn or xxxx@xxxx.xxx (Woodland CA)
John Deere BO, electric start very nice, $5000; Don Chappell nnn-nnn-nnnn (St Helens OR)
John Deere BO, hand start, $3250; Dick Good nnn-nnn-nnnn (Tangent OR)
John Deere Duplex carburetor, DLTX109UA, JD#AR50347, New Old Stock, $250; Steve nnn-nnn-nnnn (Stockton CA)
John Deere Early A and AR magneto Fairbanks Morse DRV2A, rebuilt in great condition, $600; Mark Parker nnn-nnn-nnnn (Lebanon OR)
John Deere Factory Dual 9-Bolt Hubs (with wedges) and Rims. The part numbers on the hubs is R28490R which will fit many tractors from the John Deere 60 -730 and many new generation tractors including 3010’s, 4010’s, 4020’s, etc. The part number for the wedges are A4384R and R32224 and are specifically for a 3 1/8” axle (3010, 3020, 4000, 4010, etc.) No cracks in the hubs or sleeves! Rims will fit 15.5x38” tires, part number JD3222. Hubs would be great for tractor pulling as well. Hard to find!! Price reduced to $550; Matthew Terra nnn-nnn-nnnn (Escalon CA)
John Deere G, 1951. Runs, single front wheel with 800 series 3 point hitch, $2150. I also have R-O-M and/or wide front end for sale with this tractor; Merf Hixson nnn-nnn-nnnn (Hemet CA)
John Deere GP, 1930, rebuilt engine, on rubber, reduced to $2750; Don Chappell nnn-nnn-nnnn (St Helens OR)
John Deere H, 1941, recent restoration, runs and looks great, ready to show, $4250. Email for photos. Free delivery to Turlock or Tulare; John Boehm nnn-nnn-nnnn or xxxx@xxxx.xxx (Woodland CA)
John Deere H, 1946, electric start, restored, very nice, reduced to $3500; Don Chappell nnn-nnn-nnnn or cell nnn-nnn-nnnn (St Helens OR)
John Deere H, electric start, runs good, $3970; Don Chappell nnn-nnn-nnnn (St Helens OR)
John Deere L engine, electric start, clutch, (needs front cylinder sleeved), $200; Buck Evans nnn-nnn-nnnn (Greenville IL)
John Deere L or LA in rebuildable condition; Robert Ensley nnn-nnn-nnnn (Homedale ID)
John Deere LA, 1941. Restored, starts and runs Great! S/N 2951 but tag is not on tractor. $3900; price is firm. Can email photos to serious buyers; Jim nnn-nnn-nnnn or xxxx@xxxx.xxx (Prescott Valley AZ)
John Deere LA, elec start, all tim all original, $2750; Dick Good nnn-nnn-nnnn (Tangent OR)
John Deere M, 1948, recent restoration, runs and looks great, ready to show, $3500. Email for photos. Free delivery to Turlock or Tulare; John Boehm nnn-nnn-nnnn or xxxx@xxxx.xxx (Woodland CA)
John Deere MC, totally restored, as new, $5000; Don Chappell nnn-nnn-nnnn (St Helens OR)
John Deere rebuilt 12-v starter for a 1947-56 JD 60 or A tractor, Delco #1108950, JD#TY1436, $250. No core; Steve nnn-nnn-nnnn (Stockton CA)
John Deere styled AR AO 60 620 tractor parts: Very nice hood/fuel tank/baffles $200; good 11-26 rear rim $100; decent rear fenders $200; AR-O engine parts. email for needs.; Jake Winn nnn-nnn-nnnn or xxxx@xxxx.xxx (Albany OR)
John Deere tractors: JD 40U, sn 63633 and JD 520, sn 520 2779 (?), $7000 for both; JH Keith nnn-nnn-nnnn (Hermiston OR)
Massey Harris 101 Jr. Standard, runs, needs side panels, $750; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Massey Harris 44, 1949. Tin pretty good with very light surface rust, $750; Warren Harger nnn-nnn-nnnn (Central Point OR)
Massey Harris 444 gas standard, 1 finger power steering, live pto hydraulic remote, runs good, great sheet metal hard to find, $1600; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Massy Harris 81, 1941. Runs good, has been converted to 12 volt. Good rubber, new battery, Rebuilt master cylinders fresh grease in transmission and rear axle. Everything works as it should, $1000 obo; Mark Wiggins nnn-nnn-nnnn or xxxx@xxxx.xxx (Hermiston OR)
McCormick Deering I-4, have 2. One complete, turns over, good shape. Other is a parts tractor. Both for $1650; Mark Parker nnn-nnn-nnnn (Lebanon OR)
McCormick Deering O-4: Runs, missing some orchard sheet metal, $1250; McCormick Deering O-4: Very early motor stuck nice, missing orchard sheet metal, $750; Mark Parker nnn-nnn-nnnn (Lebanon OR)
McCormick Deering rare ODS-6s Orchard diesel, 1 with motor stuck, all complete, and 1 parts tractors. Will sell parts or for pair, $2000 obo; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Minneapolis Moline 1956 UTS special. Full fender big tractor, no rust outs, $2000; Warren Harger nnn-nnn-nnnn (Central Point OR)
Minneapolis Moline GVI, 1960, 476 cu in engine. 6 cyl, factory L.P. Priced fair obo. This is a powerful unit. Barn fresh in excellent condition, low hrs; Stu Wade nnn-nnn-nnnn or nnn-nnn-nnnn (Chico CA)
Minneapolis Moline Z 1952, sn 00800253. Wide front end, nice tin, needs tires, needs restoration $500; Augie Scoto nnn-nnn-nnnn (Atwater CA)
Minneapolis Moline ZTU, 1948, pulling project. I started on this project about a year ago and have lost interest. It has a 220 OHV engine replacing the 186 side valve engine. Exhaust has been modified to come out of stock hood outlet. Battery box moved to front. Has electric fan to be installed, GM one wire alternator. Has good 12.4-38 tires on pressed rims. Needs wiring finished, weight brackets built and installed, carb rebuilt. Tractor starts and drives. Asking $1500 obo. Can send pix; Jake Winn nnn-nnn-nnnn or xxxx@xxxx.xxx (Albany OR)
Minneapolis Moline, 1944, 4 spd, 4 cyl gas, tricycle front, row crop, one flat rear tire, hasn’t run in 2 years, good steering, 12.38 tires on back, $600; Richard Beloit nnn-nnn-nnnn (Palo Cedro CA)
Oliver 60 wheel weights, have 2, $50 pair; Dick Good nnn-nnn-nnnn (Tangent OR)
Oliver 70 motor parts disassembled, $75; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Oliver: Water pump assy for Hercules engine off of Oliver OG4 tractor, $75; Oliver HG gas tank, good condition, $75; Oliver HG front idler assy, rebuilt, $150; Oliver HG bottom track roller, $100; W.F. Henderson nnn-nnn-nnnn (Sheridan OR)
Paint for all tractors; Al Norwood nnn-nnn-nnnn or nnn-nnn-nnnn (Indio CA)
Reproduction parts: Solid brass fuel shutoffs $55.00, primer petcocks $65.00, compression relief petcocks $67.50. Shift knobs 2” oval $12.60, 1-3/8 round knobs $9.10. Battery box covers for D2-D6 $30.00, battery box thumb screws $18.00 per pair. Cat 30 and 60 brass radiator tubes with fins $27.50 and $29.50.Brass fuel inlet bowls for most Ensign carbs $48 with acorn nut $60, Cat 60 fender kits and track frame covers. New reproduction ID plates, Cat 60-75 fan Shrouds $490, Durabla High temp gasket material 18x18” sheets $32, crank recoil springs $12; Dennis Wilkinson nnn-nnn-nnnn or xxxx@xxxx.xxx (Cove OR)
Rim: 1 center drop 42in rim, $75; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Rim: John Deere 34” rear rim off of 3020, $75; Buck Evans nnn-nnn-nnnn (Greenville IL)
Rims: pair 11-38 9 bolt pressed steel rims in nice shape $250; (3) 11-38 rims for cast centers (JD, MM, Oliver, Case) $85 each; Jake Winn nnn-nnn-nnnn or xxxx@xxxx.xxx (Albany OR)
Rumely K, 12-20 engine gears. Crankshaft, camshaft and governor gears, nice machined new gears, have 2 sets $1500 per set; Dennis Rutherford nnn-nnn-nnnn or xxxx@xxxx.xxx (Norco CA)
Tires (used): Two 14.9x26 Armstrong on rims, 90% rubber, $450. One 10x24 Firestone, $50. One 11x24 General, $50. One 13x28, $25. One 14.9x38, $50. One 16.9x30, $50. Two John Deere 36" rims w/9.5x36 tires, $300; Dick Good nnn-nnn-nnnn (Tangent OR)
Tires: 9-24 Chicken Track tread rear tires. Good used shape. approx 60% tread. Good for AC B or C, JD LA or M, MM BF, Farmall A, B. $150 for the pair. Can send pix; Jake Winn nnn-nnn-nnnn or xxxx@xxxx.xxx (Albany OR)
Tires: (1) Firestone 13.6-38 Field and Road Like New $250; (1) 16.9-30 45degree bar tire. 75% tread, good sidewalls. $200; PAIR of CO-OP 13.6-38 %60-70% tread. Some small weather checks but very useable $300 for pair; several 12.4, 12, 13-26 tires. No pairs, good useable condition $125 each. Can email pix.; Jake Winn nnn-nnn-nnnn or xxxx@xxxx.xxx (Albany OR)
Tires: two new 650x16 6-ply mounted on rims; Al Norwood nnn-nnn-nnnn or nnn-nnn-nnnn (Indio CA)
Topeka Highway Mower tractor (needs 162 Continental engine), 4x4, sideboom mower (rotary), $1000 or trades; Buck Evans nnn-nnn-nnnn (Greenville IL)
Tractors, parting out: Minneapolis Moline M-5 diesel; Massey 65; Monarch 35; Buck Evans nnn-nnn-nnnn (Greenville IL)
Used parts for Cat 10, 15, 20, 22, 30, 40, 60, D2, D4, 2 Ton, D2, D4, JD Lindeman and JD crawlers, some TD6 and TD9 parts. Check our web site www.omnitrac.com; Dennis Wilkinson nnn-nnn-nnnn or xxxx@xxxx.xxx (Cove OR)
Wheel weights: for 16" wheels, $200 for the set; JH Keith nnn-nnn-nnnn (Hermiston OR)
Wheel weights: Large Minnie rear wheel weights, $200. Case V rear wheel weights, $200. David Bradley, $100. Minnie 4-star front weight bracket, $100. Front weights, $50 each; Buck Evans nnn-nnn-nnnn (Greenville IL)
Wheels: 3 industrial front wheels w/hard rubber and cast centers for Case L or LA, $100 each or 3 for $275; Don Chappell nnn-nnn-nnnn (St Helens OR)