November 2009 - Tractors & Parts For Sale

All Classified Ads

1940's US Forest Service Beetle Tractor # 115, the second oldest of the less than 20 known to exist today. Very good condition, complete and very original. The Beetle Tractor is an amazing 2,000 pound crawler with an even more compelling story. Email me for a copy of the story. Pictures of a Beetle Tractor can be viewed on the Yahoo tracklayinggardentractor website under: Beetle Crawler. If after checking it all out you are interested email or give me a call. hrwebcruiser@yahoo.com ; Steve Hansen 541-374-5017 (Cascade Locks OR)

AgriCat crawler with blade, runs, drives, $2000; Jim Zimmerman 641-982-4207 (Orchard IA)

Allis Chalmers CA, wide front. Good tin, rear tires, rims. Rebuilt clutch, starter, generator, new battery, battery box, and cables. Has hydraulic lift, snap coupler. Starts and runs good, have photos, $1100 obo; Jake Winn 541-207-8327 or weasel2278@aol.com (Albany OR)

Allis Chalmers D-12 series II, 1966, 3 pt live pto, repainted, CHERRY!! pictures available on request; $7500; Carol Rockman 507-394-2352 or carolrockman@hotmail.com (Rushmore MN)

Allis Chalmers G, 1950, fully restored with cultivator bar and tines, fair tires, $3000 without 5 foot loose (and in good shape) restorable sickle bar mower, or $3600 with mower; Daryl Temple 208-249-8112 (Caldwell ID)

Allis Chalmers G, 1950, new tires, new battery box, new steering wheel front weight. Runs good, doesn't smoke, no breaks, looks like new, $2500; Wallace Weaver 951-685-3195 (Riverside CA)

Allis Chalmers G, has a single-bottom plow. Continental 4 cyl engine runs like new. Ready for a show or a parade, $4500; Bob Vogel 805-320-3294 (Santa Paula CA) [link to photo]t

Allis Chalmers G, sn 6322xx, cultivators, hydraulics, new tires, electric start. Looks & runs great. Truly nice original tractor. Will consider John Deere in partial trade, price reduced to $3500; Pat Boyle 360-835-8473 (Washougal WA) [link to photo]

Allis Chalmers HD-5, dozer, canopy, winch, excellent, $4250; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)

Allis Chalmers HD-7 farm cat with cab, 371 Detroit, $1500; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)

Allis Chalmers KO? Needs total restoration, has blade & drum, $2100; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)

Allis Chalmers U, 1937, restored a few years ago and looks and good and runs exceptionally well. Weighs 4590 pounds. Crank starts very easy on first pull almost every time. Painted pumpkin orange. Has new front tires, rear tires have very minor cracks but in over all good shape. Photos upon request. 4 speed trans, with foot operated clutch, PTO and a belt drive shaft. Not many of these around at all, and a real crowd pleaser, hp unknown, $2400; Jeff Parker 360-653-5271 or BOA721@aol.com (Marysville WA)

Allis Chalmers W Cuter tire rim for WC with rear cast center in wheel rim. In good condition with clamps, $150; Irvin Baker 209-599-3496 or the2bakers@clearwire.net (Ripon CA)

Allis Chalmers WM, 1934, crawler. Has not been started since replacing track pads, new final drive bearing, two new bearings in transmission, ground valves, replaced some of steering clutch discs, whole tractor was sand blasted and painted. Beautiful tractor. Pictures on demand. $3500; Bob Arndt 530-836-0236 or sierrarn@psln.com (Cromberg CA)

Belt pulley needs to be rebuilt, paper rotten, hooks to pto shaft, don't know what kind of tractor it came off but it's red, $30; Jack Maki 509-732-4352 or deepcreek@ultraplix.com (Colville WA)

Best 30 tracks, one pair for late Best 30. Pads have strips welded on the grousers, $2000; Irvin Baker 209-599-3496 (Ripon CA)

Case 1950 DO, first owner, stored inside, excellent condition, hydraulic blade, orchard fenders, repainted, original decals, manual, excellent tires, etc, $6000; Gary Spanfelner 530-524-8416 (Red Bluff CA)

Case 300 tractor engine free, tires good. Needs restored, $450; Kurt Spegel 503-648-9052 (Cornelius OR)

Case C, 1929 on steel, 95% restored, $3750; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)

Case C, have two 1929's. Both are complete and stuck on cutdowns to rubber. 1 has rare flat belt water pump and 1 set of rear steel, package deal, $1650 obo; Mark Parker 541-619-2692 (Lebanon OR)

Case hyd. pump goes on back of tractor. Could be for S or SC 2 ports on each side with 2 control levers. Don't know if it works or not but it is free and all there, $40; Jack Maki 509-732-4352 or deepcreek@ultraplix.com (Colville WA)

Case L on rear steel wheels, motor free, Kingston carb, came from dry country, missing gas tank and hood, $1250 obo; Mark Parker 541-619-2692 (Lebanon OR)

Case L, 1930, on steel, 90% restored, $3750; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)

Case RC, 1936, restored, new rubber, $3000; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)

Case V tractor engine free, good tires. Needs restored, $350; Kurt Spegel 503-648-9052 (Cornelius OR)

Case VAIW "tug", 1945, sn 4926162. Runs and looks good. Needs a new seat and paint. Pictures available. $1250 obo; Nick Huff 360-830-4508 or jdlovr@q.com (Seabeck WA)

Case, 1945, good paint, single front tire, good rear tires, runs good, needs to be run & carb adjustment, $1450; Carl Polley 360-263-6561 (LaCenter WA)

Case: Hood, grille & other misc. sheet metal parts for some sort of Case "Tripl-Range" tractor; Daniel Morgan 760 378-3448 or MorganDM95@aol.com (Onyx CA)

Caterpillar 10 narrow gauge complete swing frame with springs, reduced to $250; Cat Ten block, pistons, cam, crank, no pan, head or governor, $350 obo; Greg Andrade 510-427-8095 or dunefrk@razzolink.com (San Juan Bautista CA)

Caterpillar 15 top seat standard gauge. Excellent sheet metal and undercarriage. Has brass tags and original carburetor. Engine is stuck, $1500; Wally Adams 408-268-3308 (Morgan Hill CA)

Caterpillar 15, have 3, $1500 each; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)

Caterpillar 15, runs and drives well. Has non-original carb, radiator, manifold and no hood. $1000; Wally Adams 408-268-3308 (Morgan Hill CA)

Caterpillar 2 ton parts, Zenith T5T carb excellent $1200, Stromberg air cleaner complete $950,Track with pads very good $950, Cast seat brackets $250 lots of other parts. Check our web site www.omnitrac.com, Email dwilkinson@omnitrac.com, or call Dennis Wilkinson 541-963-0139 new (Cove OR)

Caterpillar 20, Big 20, have two, $2500 each; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)

Caterpillar 20/25 carb, complete, $250 obo; Greg Andrade 510-427-8095 or dunefrk@razzolink.com (San Juan Bautista CA)

Caterpillar 20/25/28 PTO complete, reduced to $350; Cat 20/25/28 radiator grill, $200; Cat 20/25/28 hood, great shape, no tears, no dings, nor any torched holes, $200; Greg Andrade 510-427-8095 or dunefrk@razzolink.com (San Juan Bautista CA)

Caterpillar 22 (early style) air cleaner, complete, $200; Greg Andrade 510-427-8095 or dunefrk@razzolink.com (San Juan Bautista CA)

Caterpillar 22 belt pulleys, choice, both loose, complete, metal cast pulley or conventional, $600 each; Cat 22 Zenith K5 Propane carb complete with spare gas Zenith carb, $200; Cat 22 Zenith K5 carbs complete, two carbs, $175; Greg Andrade 510-427-8095 or dunefrk@razzolink.com (San Juan Bautista CA)

Caterpillar 22 wide gauge top seat. Good operating condition (disked with it last year). New Hahn seat, $3500; Wally Adams 408-268-3308 (Morgan Hill CA)

Caterpillar 22, orchard model, complete, $2500; Caterpillar 22 engine, very nice, $950; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)

Caterpillar 28 4F1169 Orchard wide gauge, run and drives very good, all original a rare tractor $5500. Check our web site www.omnitrac.com, Email dwilkinson@omnitrac.com, or call Dennis Wilkinson 541-963-0139 new (Cove OR)

Caterpillar 28, early restoration. Runs good, nice Cat, $3950; Cat 28, needs restoration, with parts Cat $2500; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)

Caterpillar 30G wide-gauge factory electric start with D4 winch and all controls (not mounted to tractor currently). Plus Hyster wheel arch. Logging setup. Tractor Runs and drives very well. Tractor has rebuilt top end, great manifolds, rebuilt electric starter. CM4 magneto, lights, factory nose-guard, mushroom air-breather. Very straight tractor which is unrestored. D4 winch off working/running D4 with all controls. Original unmolested Hyster D4 wheeled Logging arch with steel spoked wheels (EWC) that is unrestored. Can provide pictures. Package price for arch, winch & tractor $11,000. Will sell tractor only separate for $8500; Greg Andrade 510-427-8095 or dunefrk@razzolink.com (San Juan Bautista CA)

Caterpillar 30G-R4 brand new old stock exhaust manifold with fins. Fabulous shape. Indescribably good, $1500. Can provide pictures; Caterpillar 30G-R4 Intake manifold in very good shape (no drop tube), $450. Can provide pictures; Greg Andrade 510-427-8095 or dunefrk@razzolink.com (San Juan Bautista CA)

Caterpillar 35 diesel, good Cat, restorable, $2000; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)

Caterpillar 35 gas, with LaPlant-Chout blade, $8750; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)

Caterpillar 40 diesel, runner, to restore, $3750; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)

Caterpillar 44 hydraulic pumps (have 2), metal lines, 2 switching control valves, coupler, mounting plate, $1000; Greg Andrade 510-427-8095 or dunefrk@razzolink.com (San Juan Bautista CA)

Caterpillar 50, gas, to restore, complete, $8750; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)

Caterpillar 60, have 2, make one, $6000; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)

Caterpillar 65, gas, very rare, restore or parts, call for info; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)

Caterpillar 75 diesel, with blade, extra engine, good, $8750; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)

Caterpillar combine, with header, very restorable, $2500; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)

Caterpillar D2 (U-series) hard-nose, not beaten up, $350. Can provide pictures; Greg Andrade 510-427-8095 or dunefrk@razzolink.com (San Juan Bautista CA)

Caterpillar D2 belt pulley, $350; Greg Andrade 510-427-8095 or dunefrk@razzolink.com (San Juan Bautista CA)

Caterpillar D2 J series: has four. One of the tractors is wide gauge and three are standard gauges. Four have the main engines loose. Asking $2500 for all four (actually 3.5 tractors) which is approaching scrap price but Rick is not a supporter of scrapping whole tractors and wants to sell to a party who may put one or more of the tractors to use in a restoration or as parts donors to another restoration; for details Rick Hawksworth 559-658-5711 or dunefrk@razzolink.com (Ahwahnee CA)

Caterpillar D2, no blade, needs work, $1250; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)

Caterpillar D4 belt pulley, $350; Greg Andrade 510-427-8095 or dunefrk@razzolink.com (San Juan Bautista CA)

Caterpillar D4 parts: drawbar $15, fender $10, grill guard $10, sprocket assembly $25; Ron Nevins 530-474-3228 or hidcrk@yahoo.com (Shingletown CA)

Caterpillar D4, 1939, straight crawler, parting out; Sean Elliot 530-873-4014 (Chico CA)

Caterpillar D4, parts or restore, needs clutch, $1250; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)

Caterpillar D6 engine #9U19445 both engines start and run good. Comes complete with radiator and oil clutch, $1500. Also have final drives, steering clutches, transmission for 9U D6 available for parts; George Krick 208-660-4364 (Sagle ID)

Caterpillar D8 slide bar with triple drums; logger, $6750; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)

Caterpillar R2 belly pan with tow hook. Used pretty decent shape, $500. Can provide pictures; Greg Andrade 510-427-8095 or dunefrk@razzolink.com (San Juan Bautista CA)

Caterpillar R2 hood, excellent shape, no tears, dings, or torched holes, still reads Caterpillar on it, $250; R2 (4J/6J) Zenith K5 carb and correct p/n elbow, good shape, $300; Greg Andrade 510-427-8095 or dunefrk@razzolink.com (San Juan Bautista CA)

Caterpillar RD4, restorable, $1750; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)

Caterpillar RD7 #9g344w unrestored, both engines start and run. Straight dozer with rear Bg pump, has front power takeoff shaft off the crankshaft. Good undercarriage, this is a good hard working tractor, located in North Idaho. I can email pictures, $4000; Shawn Wheeler 509-307-3993 or shawnwheeler88@yahoo.com (Sagle ID)

Caterpillar: Large selection of antique caterpillar tractors Cat 10 thru 60, some restored, some ready to restore. Check our web site www.omnitrac.com; Dennis Wilkinson 541-963-0139 or dwilkinson@omnitrac.com (Cove OR)

Cletrac AG 4 with home-made dozer. A little rough but runs OK, $850; Jim Chamberlin 530-823-2353 (Auburn CA)

Cletrac AG-6-H. Good shape, runs good, has battery box, $1450; Jim Chamberlin 530-823-2353 (Auburn CA)

Cletrac BG5, 1952, dozer 7ft, new clutch, steering brakes, carb, hydraulic valves & hoses, $4500; Jim Marchiando 805-964-7709 (Santa Barbara CA)

Cletrac radiator with slant top core is 20" high and 22-1/2" wide, cast iron, is good. Core has good front with bad spot on back, $250; Irvin Baker 209-599-3496 or the2bakers@clearwire.net (Ripon CA)

Cletrac: Streamline Cletrac, 1936, early sn, #62 gauge, complete sheet metal, $4800; Unstyled 74 gauge Cletrac, runs good, $2500; Cletrac E parts; Dana Davis 360-683-3845 eves (Sequim WA)

Earthmaster tractor. Runs good, hydraulics work. Please e-mail for more information and pictures. $1400; Fred Gibson 425-486-6082 or fredtrucks@earthtones.com (Bothell WA)

Earthmaster, full set of front & rear wheel weights for model CH, $200; Factory disk in good shape, attaches to hydraulic lift assembly, fits model C or CH, $250; Gil Easter 707-263-7416 (Lakeport CA)

Farmall 140, stuck, $650; Wallace Weaver 951-685-3195 (Riverside CA)

Farm-All 300 Gas. Motor runs. Clutch is out. Tires poor. Tin is rough, $500; Dennis Gullick 707-485-0956 (Redwood Valley CA)

Farmall 350 side panels, center stirp, gas tank; Mark Parker 541-619-2692 (Lebanon OR)

Farmall B, 1941, original, perfect shape, runs great, 12-volt conversion, pulley, $2900. Will deliver up to 1000 miles for this price; Raymond Friesen 541-273-4526 or rfriesen4526@yahoo.com (Klamath Falls OR)

Farmall Cub misc parts; Daniel Morgan 760 378-3448 or MorganDM95@aol.com (Onyx CA)

Farmall Cub planter, two-row, could be four-row with another hopper, front cultivator parts, $300 obo; Terry Leske 509-435-3571 (Cheney WA)

Farmall Cub, 1947, parts tractor. Tins are good, lots of good parts, $500 obo; Terry Leske 509-435-3571 (Cheney WA)

Farmall Cub, 1947, runs good, nice shape, has hydraulics, homemade front blade, $1800 obo; Terry Leske 509-435-3571 (Cheney WA)

Farmall Cub, 1948, runs good, great shape, ready for parade. Has 3 new tires, 4th tire is okay, has hydraulic & pto, center blade-mold plow draw bar & hand lift, all in great shape, $2500; Terry Leske 509-435-3571 (Cheney WA)

Farmall F20, 1938, sn FA127245N, older restoration with recent valve and ring job. Starts and runs well. Rear tires very good, fronts poor. Easily made into a nice show tractor, $1800; Bill Bains 360-452-3340 or willbains@msn.com (Port Angeles WA)

Farmall F-30 belt pulley, $75 obo; Daniel Morgan 760 378-3448 or MorganDM95@aol.com (Onyx CA)

Farmall H, have 2 rear steel cut off rims and 42 lugs, rims are bent and need to be straightened, $300; Irvin Baker 209-599-3496 or the2bakers@clearwire.net (Ripon CA)

Farmall M wide front in good shape, has been sitting for 5yrs, $1500; Mark Parker 541-619-2692 (Lebanon OR)

Farmall M, propane, loose, $500; Wallace Weaver 951-685-3195 (Riverside CA)

Farmall MD starter mower, runs good, $100; Larry Jacobson 801-254-3904 (So Jordan UT)

Farmall MD, loose, $800; Wallace Weaver 951-685-3195 (Riverside CA)

Farmall Regular, 1928, sn T-22942. Farm fresh tractor with nice F&H round spokes. This was a project started and not finished. A valve job was completed and I have a professionally restored E4A mag and a new radiator. The inside of the engine is great and with some assembly time and a few gaskets it should run well, $1350; Bill Bains 360-452-3340 or willbains@msn.com (Port Angeles WA)

Farmall SM, stuck, perfect sheet metal, $700; Wallace Weaver 951-685-3195 (Riverside CA)

Farmall Super A, runs good, needs battery box & paint, $1600; Larry Jacobson 801-254-3904 (So Jordan UT)

Ford 2N, 1948. Restored 5 years ago. 6-volt system works as well as a 12 volt. NEW Everything: radiator, starter, sleeves, pistons, wheel bearings, engine bearings, belt and hoses. Quality primer and paint over bare steel. Rubber is excellent. In short, a great running Ford 2N in pretty darn near new condition. This tractor was built with the intention of making it like new and never selling it. Three point hitch hydraulics work fine. Has headlights that are currently not hooked up. Not a nicer 2N out there in this condition for this rock bottom price. Pictures on request. Call or email Larry Cronin for a test drive, $2000 firm; Larry Cronin 360-253-9540 (Vancouver WA)

Ford 600, 1954, front bucket, rear backhoe, runs great. Must sell $7500 obo. Call for more info. Delivery possible; Michael Beasley 760-366-2860 or sheribeasley@roadrunner.com (Joshua Tree CA) [link to photo]

Ford 800, 1955, 5-speed, pto, 12 volt, front bumper. Good paint, tires. Runs perfect. With 6-1/2ft disc, $3645; Hardy McFarland 530-671-2258 (Sutter CA)

Ford 800, excellent shape, 3 point with snow plow and chains, $3500; Rich Ellis 509-773-4566 (Goldendale WA)

Ford 800, great condition, runs good, new tires, good metal, $3500; Terry Foutch 360-710-4848 (Port Orchard WA)

Ford 8N parts: rear wheels, have 2, one with Wards Riverside 10-18 tire, 40%, $165 for both. Ford 8/9N gas tank, good, $75; Ford 8N hood, $145; Other 8/9N parts; Hardy McFarland 530-671-2258 (Sutter CA)

Ford 9N field fork lift, runs very good, $2500; Gene Anderson 209-296-5416 (Jackson CA) [link to photo]

Ford 9N, 1941, sn 70400, restored in 2003. Painted Ford blue & white. All new rubber. Has had light use (mowing fire guard) since restoration, $2500, possible delivery; Walter Bain 541-218-4336 or walterandsusanbain@msn.com (Grants Pass OR)[link to photo]

Ford 9N, not running now, I think it's spark. Was running when it came in, needs TLC, $750; Bob Vogel 805-320-3294 (Santa Paula CA) [link to photo]

Ford 9N, runs perfect, new battery, wiring, tune up parts, ign coil carb kit cutout and resistor. 90% tires and hi-lo trans. Sheet metal rough. Also Farmall F20, 1937, stuck bad tires complete. Will trade both for anything John Deere; Dave 360-661-4421 or greencorndog1@gmail.com (Ferndale WA)

Ford Hi-Crop kit: kit for Ford 8N or 9N tractor. Rear rims tires, front spindles to make Hi-Crop tractor; Augie Scoto 209-761-0479 (Merced CA)

Ford Troy 6 cyl, 4 speed, new tires, new seats, new paint, runs very good, $2500; Gene Anderson 209-296-5416 (Jackson CA) [link to photo]

HG Oliver crawler front idler, rebuilt & complete, $150; WF Henderson 503-843-3692 (Sheridan OR)

Hyster Logging Bardon drawbar hook for ground skipping, 5 choker mounts, $400; Very unique Hyster logging hitch with 5 choker mounts, should mount on 30 sized tractor $400; Greg Andrade 510-427-8095 or dunefrk@razzolink.com (San Juan Bautista CA)

IHCTD9-91 with tilt/angle dozer, 5 roller runs excellent $5500. Check our web site www.omnitrac.com, Dennis Wilkinson 541-963-0139 dwilkinson@omnitrac.com (Cove OR)

International 100 with 1-row cultivator. Sweet little tractor that purrs like a kitten. Pictures available on request. Original, original, original; Carol Rockman 507-394-2352 or carolrockman@hotmail.com (Rushmore MN)

International 350 Hi-Utility gas, runs, 2000 hrs. Fast-hitch 1 hyd, remote, all lights, $1750 obo; Mark Parker 541-619-2692 (Lebanon OR)

International 806 diesel, 1963. New water pump, new seals in injector pump; new bushings in 3 pt hitch; all oils changed, runs good, good tires. TA slips in low; needs paint. Ugly, $3500; Dennis Gullick 707-485-0956 (Redwood Valley CA)

International A drawbar, $75 obo; Terry Leske 509-435-3571 (Cheney WA)

International Cub Lo-boy, 1959. Rebuilt engine, new wiring, new front and rear tires, completely restored and runs great, $2,500; Dan Floyd 360-921-9129 (Camas WA)

International I-4, 1947, good sheet metal, fair tires, wheel weights on rear wheels, pintal hook draw bar, $1200 obo; Daryl Temple 208-249-8112 (Caldwell ID)

International TD-6 motor parts block head; Mark Parker 541-619-2692 (Lebanon OR)

International TD6, runs good, undercarriage in good shape, $3500; Jerry Isakson 503-668-5608 or ikenbetbp50@verizon.net (Sandy OR)

John Deere 40C, 1955, crawler with blade, runs and steers better that it looks, $2500 obo. Can mail picture on request; Jack Johnson 714-630- 2912 or pd6pro@aol.com (Anaheim CA)

John Deere 430 tractor grill. Needs some repair, not rusted, $150; Jake Winn 541-207-8327 or weasel2278@aol.com (Albany OR)

John Deere 430 Utility assembly: Live pto transmission, clutch housing, clutch and flywheel, 5 speed trans, $850 obo; Jake Winn 541-207-8327 or weasel2278@aol.com (Albany OR)

John Deere 50, 1953, farm fresh, needs restored. Fair tires, have new grill, $1350; Carl Polley 360-263-6561 (LaCenter WA)

John Deere 60. Parting out, lots left: crank, block, head, flywheel, grill, hood, governor, long rear axles, plus misc. parts, call with needs; Mark Parker 541-619-2692 (Lebanon OR)

John Deere 820 black dash. Strong running tractor with rebuilt injection pumps and transfer pump by Renaissance Tractor. New front tires, 50% rears that are weather checked, PTO in a bucket, single remote, and good tin. This is the rare mechanical steering model, and I believe it has the creeper gearing, $6,500; Russell Turner 530-949-6878 (McArthur CA)

John Deere A, 1937, restoration almost finished with new hood, new steering wheel, louvers for radiator, flat back, new rear tires fair fronts. Round factory spokes front and rear, $4800 obo; Daryl Temple 208-249-8112 (Caldwell ID)

John Deere A, Unstyled 1937, restored. Pretty much like new! Paint, rubber with fenders. Starts easy, runs strong, nice machine for work and parades. Cut out vinyl decals, Firestone tires. New fluids, has original brass lifetime oil filter. Double wall chrome exhaust stack, $7200; Larry Cronin 360-253-9540 or larrysindabarn@live.com (Vancouver WA)

John Deere AN, sn 491443. For parts or restore. Radiator good, good straight tin, 12x38 pressed steel wheels, complete N style front pedestal, partially disassembled but complete, out she goes! Best offer; LeRoy Schoot 509-250-0824 or laschoot@wildblue.net (Goldendale WA)

John Deere AO, 1947, runs good, unrestored, $3750; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)

John Deere AO, 1949, sn 270888. Farm fresh. Runs good and does not need overhaul, but price does include lots of spare parts including new gaskets, bearings and rings. Good original tractor. Pictures available, $2500; Nick Huff 360-830-4508 or jdlovr@q.com (Seabeck WA)

John Deere AO, 1953, totally restored, $7500; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)

John Deere AOS, sn AO1035, $7500; Mike Thomas 360-435-8326 (Arlington WA)

John Deere B, 1938, spokes, rebuilt engine, $5950; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)

John Deere B, 1943, sn 151874, new paint, rings & valves, new front tires, needs grill & rear tires; Carl Polley 360-263-6561 (LaCenter WA)

John Deere B, unstyled long frame tractor, old restoration, $2950; Dave Itel 503-678-2307 (Aurora OR)

John Deere B, wide front, 1941, sn 109508. Engine is loose but does need work. Some spare parts included. Pictures available, $2500; Nick Huff 360-830-4508 or jdlovr@q.com (Seabeck WA)

John Deere BN, 1936, #26293, on steel wheels. Good condition. Not many were made. Runs fine, $6800; Rick Bollinger 559-645-4719 or rickboll@localnet.com (Madera CA)

John Deere BN, 1949, engine rebuilt, new tires, auto quality paint job, $5500; Fred Green 530-877-8006 (Paradise CA)

John Deere BO, runs good, restored 20 yrs ago. TRACTOR AUCTION - FRESNO, CA Oct. 31, 2009 Sat. See Huismanauction.com for listing and photos. 209-745-4390

John Deere BR, 1943, on steel wheels, Runs very good #332811. Some small dents in hood and back of fenders. Older restoration, $5400; Rick Bollinger 559-645-4719 or rickboll@localnet.com (Madera CA)

John Deere D 1953 & 1935 styled and unstyled parts: 1953 tranny & rear end with rear wheels. Serial No. tag included. Draw bar & the cast rear fender mounts. Radiator top & sides. Dash & steering column. JD D 1935 sheet metal. Rough, but not smashed or dented. I have both rear fenders, hood, radiator guard, air cleaner, tranny cover, crank case cover with bottom of tool box attached. All for $50.00; Larry Cronin 360-253-9540 or larrysindabarn@live.com (Vancouver WA)

John Deere D, 1929, on rubber, not running, all there, $1500 obo; Keith Gilles 306-932-4805 or kgilles@live.com (Kelfield SASK)

John Deere D, 1947, styled. Electric start, pto, dual exhaust, lights. Looks & runs very good, $3950; Hardy McFarland 530-671-2258 (Sutter CA)

John Deere G, unstyled, older restoration, $4500; Dave Itel 503-678-2307 (Aurora OR)

John Deere H, 1941, runs excellent, with plow, $3750; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)

John Deere H, 1946, sn 58424, new rings & valves, new front tires, fair rear tires, needs carb adjustment, $1500; Carl Polley 360-263-6561 (LaCenter WA)

John Deere L, 39 or 40, original, runs great, excellent sheet metal, hand start, no serial number, $2400; Pat Boyle 360-835-8473 (Washougal WA)

John Deere LA transmission, $125; Wallace Weaver 951-685-3195 (Riverside CA)

John Deere Lindeman crawler, $8950; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)

John Deere Luc engine turns over block not broke good for parts no carb or mag $50; Mark Parker 541-619-2692 (Lebanon OR)

John Deere M gas tractor in good condition. Includes a Brushhog and a Two-Stage plow. Very functional, a piece of American history. Price includes the attachments, $3950 cash for all; Dave Black 503-695-5369 or blacknstone@gmail.com (Corbett OR)

John Deere M hood. The hood is in very good condition, has been stripped and repainted. I believe it will also fit Deere 40, 420, MC, MT, $195. Photos available on request; Tom Agosti 503-341-5552 or 360-835-7213 or agosti@comcast.net (Washougal WA)

John Deere M parts: I have a hood in very good to excellent condition, $175. Right side battery side cover with toolbox, excellent condition, $40. Left side battery door, good to very good condition, $20. M front grill, very good condition, $350. Photos available. Tom Agosti 503-341-5552 or agosti@comcast.net (Washougal WA)

John Deere M Power-Depth-Controls with mounting brackets. Have two, $165 each, obo; Daniel Morgan 760 378-3448 or MorganDM95@aol.com (Onyx CA)

John Deere M, no serial number. Head overhauled, carburetor rebuilt, excellent rear tires. Frame sanded and primed but tin needs restored. Rear wheel weights sanded and painted. New muffler, belly mount, wheels restored, $1250; John Evers 503-623-8811 or 503-917-9318 cell (Dallas OR)

John Deere MC 60 dozer blade, $400; tracks 3-roller 40 or MC very good pins and bushings, 14 inch pads, 420 C 4-roller tracks; Ralph Newman 541-472-9196 (OR)

John Deere MC, 1952 crawler, new head gasket, new clutch-throw-out and pilot bearings. Runs and steers good. Located at the vista, Ca tractor museum where I drove it in the parades last June, $ 3000 obo. Can mail picture on request; Jack Johnson 714-630- 2912 or pd6pro@aol.com (Anaheim CA)

John Deere MC, total restoration, blade available, $7000; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)

John Deere R, 1951, restored, rebuilt engine, new tires, $7500; Dave Gilson 208-263-3555 or 208-263-8609 (Sagle ID) [link to photo]

John Deere rear rims: 12x26 for 40, 420, 430 utility and standard. Nice condition, $200 each; Jake Winn 541-207-8327 or weasel2278@aol.com (Albany OR)

John Deere tractors for parts: Styled AR, 430 Utility, Mid-40's BN. Call or email with list of needed parts. John Deere round tube wide front axle. Knees, spindles and tube in good shape. Pivot plate has been repaired. Missing tie rods, $550; Jake Winn 541-207-8327 or weasel2278@aol.com (Albany OR)

Logging hitch: Very unique and Cat/Hyster 30 (I believe?) logging hitch with 5 choker mounts, $400; Greg Andrade 510-427-8095 or dunefrk@razzolink.com (San Juan Bautista CA)

Magnetos: Eisemann RT4, rebuildable core loose, $100; Two Eisemann CM4 loose, very rebuildable, excellent cap, real dirty on one side $250; Eisemann CM4, rebuildable cores loose, $250 pair; Greg Andrade 510-427-8095 or dunefrk@razzolink.com (San Juan Bautista CA)

Massey Ferguson 1100 diesel, 6 cylinder, 100 hp, 3 pt, power adjust rear rims, all new electrical. Starts, runs, drives. Clutch weak. Too many projects, $2200; Dave Schirrick 775-623-4353 (Winnemucca NV)

Massey Harris 101 Jr. Standard, runs, needs side panels, $750; Mark Parker 541-619-2692 (Lebanon OR)

Massey Harris 444 gas, standard, runs good, great sheet metal, hard to find, $1650 obo; Mark Parker 541-619-2692 (Lebanon OR)

Massey Harris 55 diesel hood, good condition, $75 obo; Mark Parker 541-619-2692 (Lebanon OR)

McCormick Deering I-4, have 2 One complete, turns over, good shape, other is a parts tractor, both for $1650; Mark Parker 541-619-2692 (Lebanon OR)

McCormick Deering O-4, 1946, with all sheet metal. The metal is off now being painted. Full fenders will require some work and painting. Very good tires. Solid cast iron front wheels, $5000; Daryl Temple 208-249-8112 (Caldwell ID)

McCormick Deering O-4, runs, missing some orchard sheet metal, $1250; Mark Parker 541-619-2692 (Lebanon OR)

McCormick Deering O-4, very early, motor stuck, nice, missing orchard sheet metal, $750; Mark Parker 541-619-2692 (Lebanon OR)

McCormick Deering rare ODS-6s Orchard diesel, 1 with motor stuck, all complete, and 1 parts tractors. Will sell parts or for pair, $2200 obo; Mark Parker 541-619-2692 (Lebanon OR)

McCormick Deering W-4, 1949, good sheet metal, fair tires, wheel weights two on each rear wheel, $1200 obo; Daryl Temple 208-249-8112 (Caldwell ID)

McCormick Deering WD9's, one running and one for parts. Scrap price $2000 for both. Or parts tractor only, not running, stuck. Best offer; Walt Roys 509-689-3544 after 9PM (Brewster WA)

Midge crawler tractors, have two. One needs minor work. One needs rearend parts & final drive parts. Both engines stuck, $5500 for pair obo; Jim Zimmerman 641-982-4207 (Orchard IA)

Minneapolis Moline RTS, restored, new tires & paint, $3250; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)

Oliver 66 RC, NF, completely restored, sn 423188c66c, perfect for parades and ready to go. It starts and runs great. Add this one to your Oliver collection. Pictures available on request; Carol Rockman 507-394-2352 (Rushmore MN)

Oliver 66 Row-Crop, WF, 1953. Has been mechanically & cosmetically restored. Runs & drives great, $5500 obo; Mike Morgan 760-378-3448 or morganm8181@aol.com (Onyx CA)\

Oliver HG 42 crawler, needs engine work, $895; Bob Smythe 503-257-9615 (Sandy OR)

Oliver HG42 crawler, 1951, sn 59GA380. Good running tractor, good hydraulics. Later model tracks. Oversized fuel tank was installed. Pictures available,$2250; Nick Huff 360-830-4508 or jdlovr@q.com (Seabeck WA)

Oliver Row Crop 70, 1939, runs and drives, tractor would be an easy restoration, $1200 obo; Rich Ellis 509-773-4566 (Goldendale WA)

Pettibone (Reliance) Mercury Airport Tugger: Mercury industrial model AWGT-1. Runs good. New paint. Cab, no doors, automatic transmission, $1150; Ray Koenig 541-884-8679

Pull Away crawler, runs, drives, no attachments, $750; Jim Zimmerman 641-982-4207 (Orchard IA)

Rear rims: Have several rear 38" rear tractor rims for Deere, Moline, Farmall, and others for cast centers. 8, 9, 10, 11, and 14" width. All in good useable shape. $100 each or $175 pair; Jake Winn 541-207-8327 or weasel2278@aol.com (Albany OR)

Reproduction parts: Solid brass fuel shutoffs, $55; primer petcocks, $65; compression relief petcocks, $67.50. Shift knobs 2" oval, $12.60, 1-3/8 round knobs, $9.10. Battery box covers for D2-D6, $30; battery box thumbscrews $18 per pair. Cat 30 and 60 brass radiator tubes with fins, $27.50 and $29.50. Check our web site www.omnitrac.com; Dennis Wilkinson 541-963-0139 or dwilkinson@omnitrac.com (Cove OR)

Schramm "Ford Air" 60 crawler, runs, drives. These are rare units built in the 40s'. Only around 150 units built, $3500; Jim Zimmerman 641-982-4207 (Orchard IA)

Steel wheels complete with lugs fits John Deere D SN's 30400-123990, $300 for the pair; Frank Busch 408 202-2810 (Morgan Hill CA)

Tires: A pair of 500.21 power implement tires and tubes brand new never mounted. Priced at half of cost of new. The brand is Bridgestone, $200; Ron Hunter 253-370-1381 or johndeereman04@msn.com (Puyallup WA)

Tires: three 13x26, 45 degree tread, 90% left. On rims, weather checked, one matched pair, $100 each; Tom McDowell 541-544-2189 (Wamic OR)

Tractors: We have a number of tractors for sale, some of which can go right to work on a farm. Would like to get in touch with any row-crop farmer needing a 2-row or 1-row Farmall H or Farmall 100 ready to work. These 2 tractors are in good condition as I have put new batteries and plugs & points in them. They have never done any fieldwork such as disking or hard pulling. Each tractor has cultivators and double side dresser units enabling them to apply two different fertilizers at the same time; Don Mapes 360-755-0385, cell, 360-708-5290 or jdmmusic@verizon.net (Burlington WA)

Used parts for Cat 10, 15, 20, 22, 30, 60, D2, D4, 2 Ton, D2, D4, JD Lindeman and JD crawlers, some TD6 and TD9 parts. Dozers, canopies, belly pans and winches. Check our web site www.omnitrac.com; Dennis Wilkinson 541-963-0139 or dwilkinson@omnitrac.com (Cove OR)

Wagner TRS-14 Serial #1267 This is a very large articulating farm tractor. The old Cummins engine runs well, a lot of work was done on it last summer. It was built in Portland, Oregon. $5000 cash or trade for 60s or 70s 100 hp farm tractor. Would add cash for a John Deere; Gene Clark 503-407-5296 (Scio OR)

Weights: Suitcase weights, have ten, 85lb, $50 each obo; Daryl Temple 208-249-8112 (Caldwell ID)

Wheel weights: Two rear weights, approx. 150#. Wilson & Nutwell, Fresno # 8 Ca, $200. for both; Ken Pylman 916-775-1066 (Sacramento CA)

Wheels: John Deere D factory front spoke wheels, 1 pair, $350; 10-spline spoke wheels for unstyled John Deere A, 1 pair, call for price; Dave Itel 503-678-2307 (Aurora OR)

Wide 24" conventional pads for D4/R4/30/28. Rails ok, not special. 64 pads total with tall grouser height and little wear. Slight pitting in some pads as these came from the south, $1750. Can provide pictures; Greg Andrade 510-427-8095 or dunefrk@razzolink.com (San Juan Bautista CA)

Winch: Carco "E" series winch with mounts for PV15, 8C20, and 22. All controls. Was removed from working Cat 22 by me last year. Strong winch, $1500. Can provide pictures; Greg Andrade 510-427-8095 or dunefrk@razzolink.com (San Juan Bautista CA)

Winch: Rare Hyster Oil Field winch for Cat 20/25/28. Very complete with drawbar and power controls. Brass tag. Great shape, very heavy duty, $1000. Can provide pictures; Greg Andrade 510-427-8095 or dunefrk@razzolink.com (San Juan Bautista CA)