September 2009 - Tractors & Parts For Sale

All Classified Ads

1940's US Forest Service Beetle Tractor # 115, the second oldest of the less than 20 known to exist today. Very good condition, complete and very original. The Beetle Tractor is an amazing 2,000 pound crawler with an even more amazing story. Email me for a copy of the story. Pictures of a Beetle Tractor can be viewed on the tracklayinggardentractor website under Marv's toys. If after checking it all out you are interested give me a call; Steve Hansen 541-980-4475 or hrwebcruiser@yahoo.com (Cascade Locks OR)

Allis Chalmers B, 1939, runs very good, new fronts, good rears, hydraulics, sn 18114, $1,750; Russ Shorten 509-382-8925 or 509-876-1795 (Dayton WA) [link to photo]

Allis Chalmers B, 1939, sn 13116, wishbone front, new tires. All bearings have been replaced in the transmission, pto housing, and final drives. Steering box and front end are all new. Parade quality paint. Crank start only. New clutch. Starts easily runs nice, $2100. Pictures e-mailed at request; Mike Cristler 530-666-7395 or junktractormike@msn.com (Zamora CA)

Allis Chalmers B, 1941, good paint, tires, sheet metal, new battery, $795; Al Norwood 760-347-6462 (Indio CA)

Allis Chalmers C, 1949, has cultivator mounts & hydraulics, runs good, $1,950; Russ Shorten 509-382-8925 or 509-876-1795 (Dayton WA) [link to photo]

Allis Chalmers D-17 gas with AC loader. Nice tin, 3pt, good tires, two speed works fine, power steering. Runs good, $3750 obo; Jake Winn 541-207-8327 or weasel2278@aol.com (Albany OR)

Allis Chalmers D-17 series 4 diesel with AC loader, new cylinder head, clutch, engine seals, good transmission, new paint, excellent condition, $6,850 obo; Chuck Tillman 208-466-1796 (Nampa ID)

Allis Chalmers G parts: 1 engine block, steering columns, 2 transmission rear-end units, front axles /front axle spindles, misc other parts, frame parts, AC bell housings; Phil Wall 360-825-5453 or cell 253-370-8668 (Enumclaw WA)

Allis Chalmers G, 1950, new tires, new battery box, new steering wheel front weight. Runs good, doesn't smoke, no breaks, looks like new, $2500; Wallace Weaver 951-685-3195 (Riverside CA)

Allis Chalmers G, sn 6322xx, cultivators, hydraulics, new tires, electric start. Looks & runs great. Truly nice original tractor. Will consider John Deere in partial trade, $4000 obo; Pat Boyle 360-835-8473 (Washougal WA) [link to photo]

Allis Chalmers HD-5, dozer, canopy, winch, excellent, $4250; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)

Allis Chalmers HD-7 farm cat with cab, 371 Detroit, $1500; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)

Allis Chalmers KO? Needs total restoration, has blade & drum, $2100; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)

Baker hydraulic attachment for most John Deere letter-series tractors, $300; Roy Phelps 509-447-0482 (Newport WA)

Farmall F-30 belt pulley, $50; Daniel Morgan 760-378-3448 or MorganDM95@aol.com (Onyx CA)

BGS Oliver and Cletrac crawlers: two complete, one for parts, all have Carco model E winches; Don Foltz 503-394-3937 (Scio OR)

Carburetor: Marvel-Schebler DLTX-53. Fits John Deere A '41-47. Excellent condition, $175; Dave Itel 503-678-2307 (Aurora OR)

Case 12-20 Cross motor, 1923, runs and drives good, 100% original and complete. Good tin, poor exhaust manifold, $9,500; Bob Lockwood 970-884-4107 (Bayfield CO)

Case C, 1929 on steel, 95% restored, $4000; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)

Case C: have two 1929's, both are complete and stuck on cutdowns to rubber. 1 has rare flat belt water pump and 1 set of rear steel. Package deal $1650 obo; Mark Parker 541-619-2692 (Lebanon OR)

Case DI, 1945, parts or restore, needs #1 rod, complete, $300; Lon Sisson 707-548-6399 or 707-829-8785 eves (Sebastopol CA)

Case DO orchard, 1952. Eagle hitch, good working condition. Hydraulics and lights work. It has only been used about 20 to 30 hours a year for the past 30 years. Always stored indoors, $2500 obo; Charles Saucy 503-362-7120, lv message (Salem OR) [link to photo]

Case L on rear steel wheels, motor free, Kingston carb came from dry country, missing gas tank & hood, $1250 obo; Mark Parker 541-619-2692 (Lebanon OR)

Case L, 1930, on steel, 90% restored, $4000; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)

Case L, good running solid tractor, $2500; Warren Harger 541-261-3168 (Central Point OR)

Case RC, 1936, restored, new rubber, $3000; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)

Case S, 1944, wide front, running when parked, good sheet metal, tires leak air, electric start, tractor complete, $1,200; Dale Eisert 916-652-6636 (Loomis CA)

Case VA, 1948, garaged. Shop & owners manuals, extra starter & ignition, starts & runs, one owner, $800; Bill Boatman 360-957-2707 or 360-673-4093 days, after dark 360-274-6173 (Kelso WA) [link to photo]

Case VAC, sn 5159813, new paint and decals, narrow front end, rear tires good, front tires iffy, runs good, $1500, can email pics; Jack Maki 509-732-4352 or deepcreek@ultraplix.com (Colville WA)

Case VAH, 1947, high crop, wide front, new front & rear tires & tubes, rough sheet metal, engine free, $1,400; Dale Eisert 916-652-6636 (Loomis CA)

Caterpillar 10 1929, Running when parked, original side panels, good sheet metal, painted yellow, hydraulic blade. $4,150; Dale Eisert 916-652-6636 (Loomis, CA)

Caterpillar 10 narrow gauge complete swing frame with springs, reduced to $250; Cat Ten block, pistons, cam, crank, no pan, head or governor, $350 obo; Greg Andrade 510-427-8095 or dunefrk@razzolink.com (San Juan Bautista CA)

Caterpillar 10 standard gauge, runs and drives excellent. Original engine curtains, very good manifold. Factory PTO with controls. Ensign carb. Starts great hot or cold. Valve job about 10 running hours ago. Can provide pictures, $6500; Greg Andrade 510-427-8095 or dunefrk@razzolink.com (San Juan Bautista CA)

Caterpillar 10 wide gauge, $2000; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)

Caterpillar 10, PT2981. Starts and runs good. Undercarriage is not very good, $2500; Larry Kuehner 541-995-6250 or larrykueh@aol.com (Harrisburg OR)

Caterpillar 15, complete, ready to restore, $1500; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)

Caterpillar 20, Big 20, narrow gauge, runs, $2500; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)

Caterpillar 20/25 lower fender panels to drawbar, hard to find in good shape, $140; Cat 20/25 carb, complete, $250 obo; Greg Andrade 510-427-8095 or dunefrk@razzolink.com (San Juan Bautista CA)

Caterpillar 20/25/28 PTO complete, reduced to $350; Cat 20/25/28 radiator grill, $200; Cat 20/25/28 hood, great shape, no tears, no dings, nor any torched holes, $200; Greg Andrade 510-427-8095 or dunefrk@razzolink.com (San Juan Bautista CA)

Caterpillar 22 (early style) air cleaner, complete, $200; Greg Andrade 510-427-8095 or dunefrk@razzolink.com (San Juan Bautista CA)

Caterpillar 22 belt pulleys, choice, both loose, complete, metal cast pulley or conventional, $600 each; Cat 22 Zenith K5 Propane carb complete with spare gas Zenith carb, $200; Cat 22 Zenith K5 carbs complete, two carbs, $175; Greg Andrade 510-427-8095 or dunefrk@razzolink.com (San Juan Bautista CA)

Caterpillar 22 tail-seat gas tractor, came from the California Central Valley so all the original metal is all in great shape, light surface rust; nothing is rotted due to the central valley climate. The tractor starts hot or cold with 3 to 4 pulls of the crank. Tractor motor runs pretty good in all gears. The tractor will need the main clutch brake or clutch linkage adjusted. Does not leak water. Has fuel pump though not currently connected. Manifold does have two longitudinal cracks that are currently RTV'ed. Has uncut orchard fenders and factory footrest, $3200; Greg Andrade 510-427-8095 or dunefrk@razzolink.com (San Juan Bautista CA)

Caterpillar 22, orchard model, complete, $2500; Caterpillar 22 engine, very nice, $950; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)

Caterpillar 28, early restoration. Runs good, nice Cat, $3950; Cat 28, parts or restore, $1750; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)

Caterpillar 2-ton, 1925. 90% undercarriage. Runs great, $4,800. Can deliver for additional fee; Louis Montero 209-296-8816 (Jackson CA)

Caterpillar 30G wide-gauge factory electric start with D4 winch and all controls (not mounted to tractor currently). Plus Hyster wheel arch. Logging setup. Tractor Runs and drives very well. Tractor has rebuilt top end, great manifolds, rebuilt electric starter. CM4 magneto, lights, factory nose-guard, mushroom air-breather. Very straight tractor which is unrestored. D4 winch off working/running D4 with all controls. Original unmolested Hyster D4 wheeled Logging arch with steel spoked wheels (EWC) that is unrestored. Can provide pictures. Package price for arch, winch & tractor $12,000. Not selling arch separate; Greg Andrade 510-427-8095 or dunefrk@razzolink.com (San Juan Bautista CA)

Caterpillar 30G-R4 brand new old stock exhaust manifold with fins. Fabulous shape. Indescribably good, $1500. Can provide pictures; Greg Andrade 510-427-8095 or dunefrk@razzolink.com (San Juan Bautista CA)

Caterpillar 30G-R4 Intake manifold in very good shape (no drop tube), $450. Can provide pictures; Greg Andrade 510-427-8095 or dunefrk@razzolink.com (San Juan Bautista CA)

Caterpillar 35 diesel, good cat, $2000; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)

Caterpillar 35 gas, with LaPlant-Chout blade, $4750; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)

Caterpillar 35, diesel, 1934. Excellent overall condition, easy start, both engines run good. Excellent undercarriage, steering clutches & brakes. New starting engine clutch, new "Hahn" seats, $5900; Gordon Rhode 503-720-6657 cell or 503-678-1961 (Aurora OR) [link to photo]

Caterpillar 40 diesel, runner, to restore, $4950; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)

Caterpillar 44 hydraulic pump, metal lines, switching control valve, no coupler, reduced to $500, or unit with lines, switching control valve, coupler & mounting bracket for $1000 obo; Greg Andrade 510-427-8095 or dunefrk@razzolink.com (San Juan Bautista CA)

Caterpillar 50, gas, complete, rare, $4950; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)

Caterpillar 5U wide gauge direct electric start large front idler toolbar dozer. Tractor runs and drives very well. Tractor had the top end gone through this winter with head shaved/trued, all new glow-plugs, All new injector nozzles, new gaskets, new thermostat, new main clutch. $2k in just new parts alone. New hydraulic hoses from factory metal lines to hydraulic rams. Factory PTO with belt pulley attachment. Nearly new steering clutches. Belly pan (no hook). Tractor starts great hot or cold. Cat 44 single spool front mounted pump. Can provide more pictures. Extremely original. 158XX serial number. $12,000; Greg Andrade 510-427-8095 or dunefrk@razzolink.com (San Juan Bautista CA)

Caterpillar 60, have 3. Come look & make offer, one or all; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)

Caterpillar 65, gas, very rare, call for info; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)

Caterpillar 75 diesel, with blade, extra engine, $6950; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)

Caterpillar combine, circa early 1930's, $2750; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)

Caterpillar D2 (U-series) hard-nose, not beaten up, $350. Can provide pictures; Greg Andrade 510-427-8095 or dunefrk@razzolink.com (San Juan Bautista CA)

Caterpillar D2 belt pulley, $350; Greg Andrade 510-427-8095 or dunefrk@razzolink.com (San Juan Bautista CA)

Caterpillar D2 fender tank, clean, valve, ready to use $200; Greg Andrade 510-427-8095 or dunefrk@razzolink.com (San Juan Bautista CA)

Caterpillar D2 J series: has five. Two of the tractors are wide gauges and three are standard gauges. Four have the main engines loose. Asking $3000 for all five (actually 4.5 tractors) which is approaching scrap price but Rick is not a supporter of scrapping whole tractors and wants to sell to a party who may put one or more of the tractors to use in a restoration or as parts donors to another restoration; for details Rick Hawksworth 559-658-5711 or dunefrk@razzolink.com (Ahwahnee CA)

Caterpillar D4 belt pulley, $350; Greg Andrade 510-427-8095 or dunefrk@razzolink.com (San Juan Bautista CA)

Caterpillar D4 parts: drawbar $15, fender $10, grill guard $10, sprocket assembly, $25; Ron Nevins 530-474-3228 or hidcrk@yahoo.com (Shingletown CA)

Caterpillar D4, needs clutch, $1500; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)

Caterpillar D4, sn 4G8623W, wide front, has dozer with pto on back, hydraulic pump on front. Has cage/canopy, runs well, 1 steering clutch needs adjustment, $4000; Chris True 208-355-2614 (Midvale ID)

Caterpillar R2 belly pan with tow hook. Used pretty decent shape, $500. Can provide pictures; Greg Andrade 510-427-8095 or dunefrk@razzolink.com (San Juan Bautista CA)

Caterpillar R2 hood, excellent shape, no tears, dings, or torched holes, still reads Caterpillar on it, $250; Automotive grade restoration late model U series lights. New sealed beams. Bead blasted, primed, wet-sanded, multiple coats of ebony black, new wiring $350; R2 (4J/6J) Zenith K5 carb and correct p/n elbow, good shape, $300; Greg Andrade 510-427-8095 or dunefrk@razzolink.com (San Juan Bautista CA)

Caterpillar R2 J-series brand new old stock intake manifold and exhaust manifold. Intake $1500 & exhaust $750, or $2k for pair. Can provide pictures; Greg Andrade 510-427-8095 or dunefrk@razzolink.com (San Juan Bautista CA

Caterpillar R2 J-series complete manifold, good shape, $1000. Can provide pictures; Greg Andrade 510-427-8095 or dunefrk@razzolink.com (San Juan Bautista CA)

Caterpillar R2 J-series wide gauge. Tractor Runs and drives very well. Has been completely repainted about 5 years ago and tent/shop kept. Comes with brand new Hahn seat still in the box. Have brand new lower engine panels that are primed and ready for painting. Includes rebuilt Eisemann magneto w/impulse cover. Has all brass tags. Includes unrestored heat-box linkage, generator w/pulley, mounting bracket, lights, and brackets. Smokes a lightly when cold. Can provide current pictures. $7500; Greg Andrade 510-427-8095 or dunefrk@razzolink.com (San Juan Bautista CA)

Caterpillar RD4, $2250; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)

Caterpillar RD4, 1936, runs good, strong engine, will push a full blade, working cable blade although cable unit needs to be adjusted for raising the blade better, crawler located near Philomath Oregon, $3500; George Best 503-649-3576 (Beaverton OR) [link to photo]

Caterpillar: Large selection of antique caterpillar tractors Cat 10 thru 60, some restored, some ready to restore. Check our web site www.omnitrac.com; Dennis Wilkinson 541-963-0139 or dwilkinson@omnitrac.com (Cove OR)

Cletrac BG5, 1952, dozer 7ft, new clutch, steering brakes, carb, hydraulic valves & hoses, $4500; Jim Marchiando 805-964-7709 (Santa Barbara CA)

Cletrac F, have two. One is near complete and restorable, the other is for parts, $3500 for both. Email for more info; Stan Good 813-846-2707 (Tampa FL)

Cletrac HG-42 engine & transmission parts. Also have undercarriage parts; Daniel Morgan 760-378-3448 or MorganDM95@aol.com (Onyx CA)

Cletrac W, 1920's, have two: one 95% complete, good tin; $2,500; one 75% complete, $1,200; or, the pair $3,000; Bob Lockwood 970-884-4107 (Bayfield CO)

Cockshutt 50, 1954, completely restored with new rubber, overhaul and paint. Budda 6 cylinder engine. Pictures available. $6,000; Bill Holt 360-273-2095 or holt273@comcast.net (Rochester WA)

Co-op No. 2, 1936, wide front, sn 413, Running when parked, new front & rear tires & tubes, painted red, rare rear pto, fast, $2,250; Co-op No. 2, 1936, wide front, sn 206. New front wheels, tires & tubes, toolbox, good sheet metal, engine stuck, square fenders, belt pulley, $1,700; Dale Eisert 916-652-6636 (Loomis, CA)

Co-op No. 3, 1936, wide front, sn 202. Good sheet metal, rare rear PTO, engine stuck, need tires, good for pulling or racing!! $1,200; Dale Eisert 916-652-6636 (Loomis CA)

Detroit 2 53 diesel engine from 440-I-C-D, condition unknown, $100; Larry Jacobson 801-254-3904 (So Jordan UT)

Earthmaster tractor. Very complete and original. Radiator recored and rebuilt. Carburetor professionally rebuilt. New battery. Hydraulics work. No pto, no implements or parts. Email for more information and pictures, $1600; Fred Gibson 425-486-6082 or fredtrucks@earthtones.com (Bothell WA)

Economy early garden tractor, circa 1945, has new rear tires, recently painted, runs well, nice condition, $650; Jim Harrison 406-543-3275 (Missoula MT) [asked to put it in both tractors and lawn & garden sections]

Farmall 140, stuck, $650; Wallace Weaver 951-685-3195 (Riverside CA)

Farmall 350 side panels, center stirp, gas tank; Mark Parker 541-619-2692 (Lebanon OR)

Farmall 450 [I think], 1954 diesel with a Farmhand F-11 loader, PTO & 3pt. hitch. The tractor runs well and all hydraulics work. Run or restore, $2000 obo. The tractors are in Chiloquin OR, 25 miles north of Klamath Falls; John D. Stewart 541-783-2050 or grandynpapa@aol.com (Chiloquin OR)

Farmall A, 1941, nice little tractor $800; Warren Harger 541-855-7340 (Central Point OR)

Farmall AV 1941, runs good, starts easy, clean tractor, needs fenders. $2000; Mark Brown 760-801-6910 or jibdty@roadrunner.com (Fallbrook CA)

Farmall C, 1951. The tractor runs OK and is basically complete to use or restore, $1500 obo. The tractors are in Chiloquin OR, 25 miles north of Klamath Falls; John D. Stewart 541-783-2050 or grandynpapa@aol.com (Chiloquin OR)

Farmall Cub, 1955, Low Boy, looks to be an industrial-has orignal yellow paint, no hydraulics, no pto, runs, needs TLC; Mark Brown 760-801-6910 or jibdty@roadrunner.com (Fallbrook CA)

Farmall Cub parts. Call or email for needs; Daniel Morgan 760-378-3448 or MorganDM95@aol.com (Onyx CA)

Farmall Cub with cultivators, plow, as is, $975; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)

Farmall Cub, 1948, overhauled carb, gen, gov, mag, partial paint job, gas tank cleaned, new radiator. Need to assemble, $2,300; Dale Eisert 916-652-6636 (Loomis CA)

Farmall Cub, 1949, runs, painted, decals, nice tires, new wiring, overhauled carb, converted to 12 volt system, $3,200; Dale Eisert 916-652-6636 (Loomis CA)

Farmall Cub, 1959, rebuilt motor, new paint, seat, battery box, radiator, front tires, steering wheel, tool box & carb, $1695; Al Norwood 760-347-6462 (Indio CA)

Farmall Cub, have two. One very solid, runs great with hyd. Other needs restoration, the motor is free. Also have 2 plows, 1 disc, 1 mower, 1 blade, 1 cultivator & owners manual; all for $2500; Gaylord Wilmovsky 360-736-6587 or 360-880-6587 after 5pm (Centralia WA)

Farmall F-12, 1934, single front, starves for gas, rare electric start, rare chain binder hitch lift, good sheet metal & tires, $1,175; Dale Eisert 916-652-6636 (Loomis CA)

Farmall F-14, 1938, on steel. Complete restoration, photos available, $3800; Marc Raubuch 360-269-8942 (Winlock WA)

Farmall H belt pulley, $50, can email pics; Jack Maki 509-732-4352 or deepcreek@ultraplix.com (Colville WA)

Farmall M parts tractor. Engine has compression & turn over, no magneto, rear rims bad, $300; Wes Stebbins 541-980-0982 (Goldendale WA)

Farmall M wide front in good shape, has been sitting for 5yrs, $1500; Mark Parker 541-619-2692 (Lebanon OR)

Farmall M, propane, loose, $500; Wallace Weaver 951-685-3195 (Riverside CA)

Farmall M, wide front. PN# 5671DA, needs tie rod work, $750; 11x38 rims, $100 ea or $175 pr; Belly mount hyd system, $100; Foot pedal assembly, $50; Clay Shorten 503-625-6497 or btbearclay@gmail.com (Newberg OR)

Farmall MD starter mower, runs good, $100; Larry Jacobson 801-254-3904 (So Jordan UT)

Farmall MD, loose, $800; Wallace Weaver 951-685-3195 (Riverside CA)

Farmall SM, stuck, perfect sheet metal, $700; Wallace Weaver 951-685-3195 (Riverside CA)

Farmall Super A, 1949, complete restoration, new tires, Woods belly-mount mower, photos available, $3400; Marc Raubuch 360-269-8942 (Winlock WA)

Farmall Super A, runs good, needs battery box & paint, $1600; Larry Jacobson 801-254-3904 (So Jordan UT)

Ferguson & Massey Ferguson used and new parts; Abe or Gordon 360-794-7232 (Arlington WA)

Ford 2N with Sherman Trans. Runs great. Lots of new parts. Looks nice, $1,700; Steve Blake 971-404-4575 or ncb1978@hotmail.com (Molalla OR)

Ford 2N with Sherman, 3 new tires, need electrical work, $975; George Kurtz 541-926-7144 (Albany OR)

Ford 2N, 1946, completely rebuilt from top to bottom. New tires, base coat clear coat paint, show quality tractor, $3000 obo; Todd Voth 509-750-2772 (Moses Lake WA)

Ford 2N, 1946, new front tires, new rear tire, electric ignition, 12 v, Sherman hi-lo. New brush hog, single bottom plow, calcium in all tires, no rust; Gary Knittle 360-943-8656 (Olympia WA) [link to photo]

Ford 8N and 9N tractor parts, lots for sale, make offer; Terry Foutch 360-710-4848 (Port Orchard WA)

Ford 8N, 1950-51, good running, new carb, rebuilt hyd system, new battery, Sherman transmition, $2300; Tom Parker 541-285-8701 or motnweez@comcast.com (Leaburg OR)

Ford 8N, runs good, good condition, good tires, 12 V, $1495; Stan Raney 503-349-8425 (Oregon City OR)

Ford 9N grill, excellent condition; Al Norwood 760-347-6462 (Indio CA)

Ford 9N, 1941, running when parked, good sheet metal, good tires, 3pt stuck in down position, new muffler, $2,200; Dale Eisert 916-652-6636 (Loomis CA)

Ford 9N, 1942, with front-end loader. Runs good, looks good. Nice tires, everything works, $2995; Stan Raney 503-349-8425 (Oregon City OR)

Ford 9N, Ford Ferguson, 1940, runs, needs one new rear tire (tire holds air but is cracked), $1000; Todd Voth 509-750-2772 (Moses Lake WA)

Ford/Funk starter housing and bearing (some call it a nose cone). It is hand machined from steel. Not casting that does not hold up. It is for a 8N Ford Funk - 6 cyl 226 cubic engine. Russ or Peggy 253-847-2191 or oldlogtrucker@msn.com (Graham WA)

Fordson & parts: Fordson tractor, 1921, $550; High compression head for Fordson, casting # Ford-F133DR, $80; two after-market magneto setups for Fordson tractor, $135 each. I have all parts to put them on; Dale Roth 541-367-6958 (Sweet Home OR)

Fordson Major, 1949, for sale, not running, has all tires, lights, blinkers, stabilizing bar, etc. $800 obo; Janet Good 360-466-3273 (Mt. Vernon WA)

Fordson Super Dextra, complete, sheet metal decent, tires hold air, has been sitting idle for three years, 3 pt, can't find serial #, $600, pictures avail; Frank Vantacich 916-549-2230 or rustymetal@sbcglobal.net (Loomis CA)

Hyster Logging Bardon drawbar hook for ground skipping, 5 choker mounts, $400; Very unique Hyster logging hitch with 5 choker mounts, should mount on 30 sized tractor $400; Greg Andrade 510-427-8095 or dunefrk@razzolink.com (San Juan Bautista CA)

IH Farmall 350 Wheatland Utility, 1957, less than 900 made. Runs good, good sheet metal and fenders, good tires, paint is old and faded, $3750; Larry Daniels 909-844-2500 (Phelan 92371 CA)

International 300 Ind, 1955, HD Wagner loader, motor frozen, needs two rear tires, for parts or fixer-upper, $400; Lon Sisson 707-548-6399 or 707-829-8785 eves (Sebastopol CA)

International 350 Hi-Utility gas, runs, 2000 hrs., fast hitch 1 hyd. remote all lights, $1750 obo; Mark Parker 541-619-2692 (Lebanon OR)

International Hydro 100 wheel tractor with big bale hay loader, runs good, good tires, $3500; Chris True 208-355-2614 (Midvale ID)

International O-4 tractor, no orchard tin, lots of good parts & tires $375; Fred Gilbertson 541-942-7086 or fjgfarm@aol.com (Creswell OR)

International TD-6, 1949, crawler tractor. Has a new overhauled engine with about 350 hours on it. Undercarriage is in real good shape with a brand new set of rails. New paint job last summer. All decals are on this tractor, even though this photo does not show that all are there, $6550; Dale Roth 541-367-6958 (Sweet Home OR) [link to photo]

John Deere 4020 gas tractor with Westendorf motor & 5 ft box blade. Engine rebuilt once years ago. Twin forks for front for loading big round bales plus bucket. Very good condition, owned 17 years, never pulled a plow, just loaded with it. Front & rear tires about 80%, $8500; Glenn Jobe 503-815-3632 (Tillamook OR)

John Deere 40T wide, converted to high-crop, runs good, has 950x42" rear tires, new front, has hydraulic leak in left rear arm, price reduced, $3500; Jim Marchiando 805-964-7709 (Santa Barbara CA)

John Deere 40T, sn 71389. Complete, stored inside, ran when parked, have fenders, rears 50%, front useable. All manuals. New seat, steering wheel. Tin real good, extra step, headlights, 3 pt, new muffler, rear scraper complete. Would be a nice one to restore, no time to complete, $2650; Tom Barrett 760-378-2295 eves 6-10 p.m. (Weldon CA)

John Deere 40-U, 1954. Runs well, overall good tractor. Comes with Wagner front loader that is not presently on tractor but has been, $3500 obo; Robert Johnson 360-297-2333 (Kingston WA)

John Deere 420C, 1959, gas, hydraulic blade, looks & runs great, $5000; Mark Smith 530-333-4338 (SW Montana)

John Deere 420C, 1959, hydraulic blade, looks & runs great, $5000; Mark Smith 530-333-4338 (SW Montana)

John Deere 420W, 1958, 80% restored. New radiator, hoses, cylinder head, gaskets, seat, steering wheel, front tires, front wheels. 5 sp trans, pto, 3 pt hitch with 2-bottom plow, runs great, $3750; Tom Allen 530-409-8091 (Placerville CA) [link to photo]

John Deere 430 Utility tractor, 3 pt, pto, power steering, 5 speed, live power. Has new front tires, steering wheel, shift knob & seat. Has rebuilt starter, water pump & clutch, $3250; Dave Itel 503-678-2307 (Aurora OR)

John Deere 435, 1960, price reduced to $7500 for quick sale. Tires fair, metal good, no ps or fenders. Runs out well but is unrestored. Tractor currently in Montana; Jim Pomajevich 360-606-1233 or pomajevich@aol.com (Vancouver WA)

John Deere 440 crawler, gas, blade, reverser, runs good, $3000; Dick Good 541-619-6090 days, 541-928-7933 eves (Tangent OR)

John Deere 50, wide front, running, sheet metal fair; Dave Gallant 503-663-6535 (Boring OR)

John Deere 520, 1956 wide front end (only), excellent condition, $1500; Kalli Deschamps 406-721-3370 or alonze1952@yahoo.com (Missoula MT)

John Deere 520, 1956, fully restored, working parts as well as cosmetics, narrow front end, original 3-pt hitch, drawbar, new air-ride seat, new John Deere sunshade, new tires and batteries, $8,000; Kalli Deschamps 406-721-3370 or alonze1952@yahoo.com (Missoula MT)

John Deere 60 parts: crank, head, flywheel, radiator, grill, hood, governor, long rear axles, draw bar frame, plus misc. parts. Call with needs; Mark Parker 541-619-2692 (Lebanon OR)

John Deere 720 diesel, 1958, pony start, both engines run good, ready for paint. I have paint, new decals, seat & battery, very good condition, $5100; Al Norwood 760-347-6462 (Indio CA)

John Deere 830 (2) #1 running, pony, starts and runs good, tires and tin good. #2 pony motor blown, repairable, head cracked. Good tires and tin. Are consecutive serial #s.(3958 & 3959) Sell or trade for other 2cyl. Make offer; Dave Wattenbarger 208-267-7468 (Bonners Ferry ID)

John Deere 830, one pony start, $7500, one electric start, $7500; Dick Good 541-619-6090 days, 541-928-7933 eves (Tangent OR)

John Deere 950, 1981, with Yanmar Diesel. New rears, starter & paint. Like new condition, $6,500; Dick Wilson 559-897-3862 (Kingsburg CA)

John Deere A parts: crankshaft, axle shaft; Phil Wall 360-825-5453 or cell 253-370-8668 (Enumclaw WA)

John Deere A, 1948, good running, good tin, $1500; Dick Good 541-619-6090 days, 541-928-7933 eves (Tangent OR)

John Deere A, 1949, good project, $650; Dick Good 541-619-6090 days, 541-928-7933 eves (Tangent OR)

John Deere AO, 1947, unstyled, runs good, unrestored, $4750; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)

John Deere AO, 1949, un-styled electric starter, hydraulics, fresh oil and filter, older restoration but the paint and sheet metal are excellent. Good tires, runs and drives very well, $5500; Larry Daniels 909-844-2500 (Phelan CA)

John Deere AO, 1953, restored, $7500; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)

John Deere AR, 1949, parting out. No head or wheels. Rough fenders. Good radiator; Glen Carrigan 1-360-497-0518 (Glenoma WA)

John Deere AR, unrestored, $2250; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)

John Deere B, 1935 brass tag, restored 10 years ago, new rear tires, front spoke wheels, rear cut-offs. Runs great, good parade tractor. Need room in garage, $4700, Mike Tyler 760-375-3658 or tylermn@earthlink.net (Ridgecrest CA)

John Deere B, 1938, spokes, rebuilt engine, $6250; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)

John Deere B, wide front end, very nice looking, have not started tractor in 4 years, needs one rear tire, $2000; Warren Harger 541-261-3168 (Central Point OR)

John Deere BO, 1935, sn 325148, restored, all new tires and fenders, all fuel model, $10000; Bob Boyd 360-457-4224 or abbey@wavecable.com (Port Angeles WA) [link to photo]

John Deere BO, 1937 unstyled, fully restored, working parts and cosmetics, excellent tin, new tires, original factory plate SN, $8,000; Kalli Deschamps 406-721-3370 or alonze1952@yahoo.com (Missoula MT)

John Deere BO, 1939, sn 330472, new tires with new fenders yet to installed. Runs very good; Richard Wheeler 509-453-5118 or 509-658-2920 (Yakima WA)

John Deere crankshaft for unstyled A, $100; Roy Phelps 509-447-0482 (Newport WA)

John Deere D on rubber. Unstyled 1928 model. Runs. Mag, carb, etc. rebuilt, $2,900; Dick Wilson 559-897-3862 (Kingsburg CA)

John Deere D parts, 1926 to 1934; Fred Funke 208-877-1698 (Deary ID)

John Deere D, 1929, stuck, missing some parts, $500; Hans Strauss 509-427-8830 (Stevenson WA)

John Deere D, 1937, sn 134478, new tires on factory round spokes, engine completely rebuilt, new clutch with new fenders yet to be installed, $6000; Richard Wheeler 509-453-5118 or 509-658-2920 (Yakima WA)

John Deere D, styled, electric start, pto, turning brakes, painted, $4000; D, unstyled, new tires, painted, $4000; Dick Good 541-619-6090 days, 541-928-7933 eves (Tangent OR)

John Deere Dd front spoke wheels, factory wheels, $300; Dave Itel 503-678-2307 (Aurora OR)

John Deere G, 1947, good condition, $2950; Dick Good 541-619-6090 days, 541-928-7933 eves (Tangent OR)

John Deere G, 1947. Narrow front, 6 speed with high and low range. Runs excellent. $3,000. Pictures available; Bill Holt 360-273-2095 or holt273@comcast.net (Rochester WA)

John Deere G, 1949, runs great, complete restore, new front tires, rear rubber 90%, $4800; Arland Adams 530-243-8638 (Redding CA) [link to photo]

John Deere GP, 1929, sn 204865 overhauled not restored, new valve and guides, new rings and gasket set; Fred Funke 208-877-1698 (Deary ID)

John Deere H left grill; Phil Wall 360-825-5453 or cell 253-370-8668 (Enumclaw WA)

John Deere H, 1941, runs excellent, with plow, $3750; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)

John Deere H, 1941, runs, throttle stuck, good sheet metal, fair tires, cute tractor, ready for some TLC!! $1,900; Dale Eisert 916-652-6636 (Loomis CA)

John Deere hitch assembly, complete, (with loop drawbar), $250; Roy Phelps 509-447-0482 (Newport WA)

John Deere HN, have two. The 1942 is barn fresh complete, not stuck, original tires, new grills and hydraulics. The 1946 is partially restored, partially disassembled. New tires and rims, many new parts, new grills and hydraulics. Both tractors and a ton of used spare H parts, $7,500 or will sell individual tractors for $3,500 each; Chuck Tillman 208-466-1796 (Nampa ID)

John Deere L, (unstyled) 1938, running when parked, overhauled carb, mag, 12 volt system, cleaned gas tank, assembly required, $2,600; Dale Eisert 916-652-6636 (Loomis CA)

John Deere LA transmission, $125; Wallace Weaver 951-685-3195 (Riverside CA)

John Deere LA, 1941-1946, sn tag missing. Newly rebuilt engine and external parts, good sheet metal & tires, need to assemble & paint, $4,200; Dale Eisert 916-652-6636 (Loomis CA)

John Deere LA, 1946, starts & runs great, good tires, paint, center blade, rear cultivators, mechanical lifts, $4,250; Dale Eisert 916-652-6636 (Loomis CA)

John Deere Lindeman crawler parts, 40 year accumulation. Prefer to sell as lot, $5000; Roy Phelps 509-447-0482 (Newport WA)

John Deere Lindeman crawler, last year, runs good, $8950; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)

John Deere live hydraulic pump attachment for most John Deere letter-series tractors. (Fits in mag hole.) $300; Roy Phelps 509-447-0482 (Newport WA)

John Deere M grill. The grill has been repaired and painted. It is not perfect but is in very good condition, $350; Tom Agosti 503-341-5552 (Washougal WA)

John Deere M Power Depth Controls, plus mounting brackets. Call for price; Daniel Morgan 760-378-3448 or MorganDM95@aol.com (Onyx CA)

John Deere M Power-Depth-Controls, have two, $165 for each with mounting brackets; Daniel Morgan 760-378-3448 or MorganDM95@aol.com (Onyx CA)

John Deere M, 1948, restored, all new tires. Good runner, parade or show, only $3000; Lon Sisson 707-548-6399 or 707-829-8785 eves (Sebastopol CA)

John Deere MC, total restoration, blade available, $7000; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)

John Deere parts: M, LA, D parting out; Dick Good 541-619-6090 days, 541-928-7933 eves (Tangent OR)

John Deere R manual pony motor starter unit, complete but needs cable, $350; Chuck Tillman 208-466-1796 (Nampa ID)

John Deere Wico-X or Wico-C for sale. Completely rebuilt magnetos for $189.00 ea. (Exchange) I will need your old magneto as a core. If you have no mag, there is a core charge. Magneto Rebuilding Service - If you have a tractor or an engine that has a magneto in need of repair, please contact me. I have repaired and or restored many magnetos for nearly every brand of tractor and have worked on nearly every brand of magneto. I take cores in trade towards the purchase of rebuilt magnetos or buy them outright and can ship anywhere in the US for $11.00 USPS Priority Mail. I have rebuilt magnetos for sale as well. Check out my website at www.rebuiltmags.com; Rudy Calin 651-233-6655 or rudy@rebuiltmags.com (FOREST LAKE MN)

Logging hitch: Very unique and Cat/Hyster 30 (I believe ?) logging hitch with 5 choker mounts, $400; Greg Andrade 510-427-8095 or dunefrk@razzolink.com (San Juan Bautista CA)

Magnetos: Eisemann RT4, rebuildable core loose, $100; Two Eisemann CM4 loose, very rebuildable, excellent cap, real dirty on one side $250; Eisemann CM4, rebuildable cores loose, $250 pair; Greg Andrade 510-427-8095 or dunefrk@razzolink.com (San Juan Bautista CA)

Massey Ferguson 97 with 18.4 x 34 duels. Very nice tractor - lots of trophies, $6750; George Kurtz 541-926-7144 (Albany OR)

Massey Ferguson TO-20, good tin, runs, looks & works good. Rear tires new, 3 pt with rear blade, $2500. Can send photos; Gary Sevold 253-740-3716 (Auburn WA)

Massey Harris 444. Gas standard, runs good, great sheet metal, hard to find, $1650 obo; Mark Parker 541-619-2692 (Lebanon OR)

Massey Harris 55 Diesel hood, good condition, $75 obo; Mark Parker 541-619-2692 (Lebanon OR)

Massey Harris Pony, 1949, runs, good sheet metal, radiator just cleaned, needs to be assembled, $1,950; Dale Eisert 916-652-6636 (Loomis CA)

McCormick Deering 0-12, 1937, running when parked by previous owner, instruction book, good tires, good sheet metal, $2,400; Dale Eisert 916-652-6636 (Loomis CA)

McCormick Deering 10-20 W, $500; Jim Messick 209-464-8650 (Linden CA) [link to photo]

McCormick Deering 10-20, 1927, running when parked, good sheet metal, original side panels, steel wheels, instruction book, $2,600; Dale Eisert 916-652-6636 (Loomis CA)

McCormick Deering 1020, 1937, paint, sheet metal, tires all good, $1500; Johnnie Everitt 360-573-1510 (Ridgefield WA)

McCormick Deering I-4, have two. Complete turns over good shape; other is a parts tractor, both for $1650; Mark Parker 541-619-2692 (Lebanon OR)

McCormick Deering O-4. Runs, missing some orchard sheet metal, $1450; Mark Parker 541-619-2692 (Lebanon OR)

McCormick Deering O-4. Very early motor stuck, nice, missing orchard sheet metal, $900; Mark Parker 541-619-2692 (Lebanon OR)

McCormick Deering rare ODS-6s Orchard diesel. One with motor stuck, all complete, & one parts tractor. Will sell parts or for pair, $2200 obo; Mark Parker 541-619-2692 (Lebanon OR)

McCormick Deering W-30 1935, 3spd trans, belt pulley, good sheet metal, no rot, runs good. $2500; Mark Brown 760-801-6910 or jibdty@roadrunner.com (Fallbrook CA)

McCormick Deering, steel wheeled, has not ran for some time. Engine stuck setting in barn. Sheet metal fair, as is most of the tractor. Flange for crack housing is only thing we see broken. Email for pictures, $1000 obo; Fred Gibson 406-257-7596 or mtnwmn1@centurytel.net (Kalispel MT)

Minneapolis Moline R, 1948, wide front, running when parked, clean gas tank, paint, decals, new tires/tubes, good sheet metal, $3,400; Dale Eisert 916-652-6636 (Loomis CA)

Minneapolis Moline RTS, restored, new tires, $3750; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)

Minneapolis Moline U, painted, nice tractor, $1500; Dick Good 541-619-6090 days, 541-928-7933 eves (Tangent OR)

Minneapolis Moline-BG (Avery), 1955, 3pt, rebuilt eng, new tires, only 900 made, rare model. Comes with Mighty Mac chipper and a lift boom, $3000, consider trade; Jim Gardner 503-927-6217 or oldironjim@netscape.net (Vernonia OR)

Oliver 1850 D painted as MM G 850 with 23.1 x 34 rears (60%) and new 10 x 16 fronts, $4950; George Kurtz 541-926-7144 (Albany OR)

Oliver 550 gas tractor, 3 pt, live pto, hydraulics, power steering, lights, turf tires are like new, good paint, starts & runs good. I can email pics; Kent Covert 208-484-4818 (Kuna ID)

Oliver 60 front steering unit; Ernest Walker 541-884-3856 or 541-331-0791 (Klamath Falls OR)

Oliver 66 row crop, WF, 1953, completely restored, runs & drives great, with new tires all the way around, $6000; Daniel Morgan 760-378-3448 or MorganDM95@aol.com (Onyx CA)

Oliver OC-3 late HD model with heavy frame and factory dozer and hydraulics. Rebuilt starter, generator, water pump & radiator. Engine excellent. 70% + tracks 95% sprockets. Needs steering bands, drums, and most idlers rebuilt. Have rear PTO and belt pulley attachment. Also older OC-3 for parts. $1000 both. Will help load; Steve Parsons 360-683-1309 or parsons@olypen.com (Sequim WA)

Oliver OC-3 tractor, for parts or restoration. Has cracked block, but I have two good blocks to rebuild. Lots of new parts, good sheet metal, $500 obo; Dave Rovegno 916-417-5168 (Herald CA) [link to photo]

Oliver OC6 set of tracks, 12" wide bushings do not seem to have much wear. They might also fit the HG, $500. Brush protector for grill for small crawler, round holes 20" wide 34" high, $50. Good fender for Oliver 60 Standard, $50; Ken McDonald 360-896-5114 or oliver88n@comcast.net (Vancouver WA)

Oliver Row-Crop 66, 1953, WF, restored, tractor runs, drives & looks outstanding. Has all new tires, paint, decals, gauges & lights. Email for pictures, $5500 obo; Mike Morgan 760-378-3448 or morganM8181@aol.com (Onyx CA)

Panther antique tractor crawler dozer. Less than 20 to 25 Panthers exist today. This tractor has rebuilt engine, brakes, new $500 radiator, and newly fabricated replacement fuel tank. Undercarriage is great! Each track pad still reads Panther as like new. Have new decals also to go with it. Could be taken to show as-is or with some minimal cosmetic work; could be high-grade show tractor. Has original aluminum fenders and remanufactured steel fenders. Runs and drives very well. Has correct original seat, $5500 obo; Greg Andrade 510-427-8095 or dunefrk@razzolink.com (San Juan Bautista CA)

Radiators: one Allis Chalmers M, one McCormick Deering. Tanks & side rail excellent, cores fair, $200 each plus shipping; Phil Marcucci 707-544-4789 (Santa Rosa CA) [link to photo]

Reproduction parts: Solid brass fuel shutoffs, $55; primer petcocks, $65; compression relief petcocks, $67.50. Shift knobs 2" oval, $12.60, 1-3/8 round knobs, $9.10. Battery box covers for D2-D6, $30; battery box thumbscrews $18 per pair. Cat 30 and 60 brass radiator tubes with fins, $27.50 and $29.50. Check our web site www.omnitrac.com; Dennis Wilkinson 541-963-0139 or dwilkinson@omnitrac.com (Cove OR)

Rumely DoAll 1930. Original except for radiator, steel wheels, rare tractor to own, needs TLC to run, not stuck, $3,600; Dale Eisert 916-652-6636 (Loomis CA)

Terramite T-50, 1998, loader backhoe, excellent condition, 500.8 hours, $4,500. Delivery available; Louis Montero 209-296-8816 (Jackson CA)

Tire: 11.2x28 tire, $50; Ernest Walker 541-884-3856 or 541-331-0791 (Klamath Falls OR)

Tire: One 9.5-42 Goodyear "Traction Sure-Grip" with 45 degree tread angle. Tire in outstanding condition. Has no weather checks, has 90+% tread left, $250; Daniel Morgan 760-378-3448 or MorganDM95@aol.com (Onyx CA)

Tires & wheels: John Deer tires and wheels, 750x22, fits JD L, 95% rubber, nice wheels. Asking $1200 obo; Don Braun 541-218-6557 (Grants Pass OR)

Tires: one Kelly 9.5-24 tire with 45 degree tread angle. Has weather checking, but is very usable. And, one Goodyear 9.5-24 "Sure-Grip" tire with 45-degree tread angle. Has weather checking but is very usable, $125 for each or $200 for the pair; Daniel Morgan 760-378-3448 or MorganDM95@aol.com (Onyx CA)

Tires: Two 11.2 x28" Firestone tractor tires. New condition, $450; Louis Montero 209-296-8816 (Jackson CA)

Tires: various sizes: two 11.-24; 14-9--28; 14-9-26; 14-9-24; 7.50-16; 16-9-24; Tri-18RS, $100 each; Ron Ludford 530-885-0171 (Auburn CA)

Twin City KTA. Barn stored after 1990's, restoration original and complete, with old style MM umbrella, looks and runs good, $3,600; Bob Lockwood 970-884-4107 (Bayfield CO)

Twin City: 21-32 and 27-44 and early GTA, not running; Chuck Wallace 425-508-3545 (Toledo WA)

Used parts for Cat 10, 15, 20, 22, 30, 60, D2, D4, 2 Ton, D2, D4, JD Lindeman and JD crawlers, some TD6 and TD9 parts. Dozers, canopies, belly pans and winches. Check our web site www.omnitrac.com; Dennis Wilkinson 541-963-0139 or dwilkinson@omnitrac.com (Cove OR)

Wheel weights: Cockshutt rear wheel weights, $75; Bill Holt 360-273-2095 or holt273@comcast.net (Rochester WA)

Wheel weights: Farmall Cub wheel weights, front and rear, $100 for all; Bill Holt 360-273-2095 or holt273@comcast.net (Rochester WA)

Wheel Weights: Front & rear weights for Ford 2N or 9N, $300. Front & rear weights for McCormick Deering 10-20, $350; Wilson & Nutwell rear weights for Allis Chalmers C, $200; Daniel Morgan 760-378-3448 or MorganDM95@aol.com (Onyx CA)

Wheel weights: front & rear wheel weights for Ford 2N; Wilson & Nutwell rear wheel weights for Allis Chalmers C; Front & rear wheel weights for McCormick-Deering 10-20; Daniel Morgan 760-378-3448 or MorganDM95@aol.com (Onyx CA)

Wheel weights: two rear wheel weights, approx. 150# each, fit Ford tractors 1954 and up, $250 plus shipping; Phil Marcucci 707-544-4789 (Santa Rosa CA) [link to photo]

Wheels: 2 hubs 12 spline axel, 2 cast iron centers heavy, 2 rims 42", 1 tires 11.42" Good, fits John Deere GM, sn 18782; Fred Funke 208-877-1698 (Deary ID)

Wheels: HD 32-spoke contractor steel wheels for McCormick Deering W-30, $600; Jim Farber 707-894-4759 or tractasaurus @pacific.net (Yorkville CA)

Wheels: one set of 9N-2N-8N tip-toe rear steel, $200; Todd Voth 509-750-2772 (Moses Lake WA)

Wheels: set of rear steel wheels for Ford 9N or 2N. Just missing a few lugs, $200; Steve Blake 971-404-4575 or ncb1978@hotmail.com (Molalla OR)

Wico magneto, 4 cylinder Model X ?, number XH2045, $50; Jack Dale 503-738-5973 (Warrenton OR)

Wide 24" conventional pads for D4/R4/30/28. Rails ok, not special. 64 pads total with tall grouser height and little wear. Slight pitting in some pads as these came from the south, $1750. Can provide pictures; Greg Andrade 510-427-8095 or dunefrk@razzolink.com (San Juan Bautista CA)

Winch: Carco "E" series winch with mounts for PV15, 8C20, and 22. All controls. Was removed from working Cat 22 by me last year. Strong winch, $1500. Can provide pictures; Greg Andrade 510-427-8095 or dunefrk@razzolink.com (San Juan Bautista CA)

Winch: Hyster D2N winch. Removed from working tractor. Complete with controls. Strong winch, $1500. Can provide pictures; Greg Andrade 510-427-8095 or dunefrk@razzolink.com (San Juan Bautista CA)

Winch: Rare Hyster Oil Field winch for Cat 20/25/28. Very complete with drawbar and power controls. Brass tag. Great shape, very heavy duty, $1000. Can provide pictures; Greg Andrade 510-427-8095 or dunefrk@razzolink.com (San Juan Bautista CA)