August 2009 - Tractors & Parts For Sale

All Classified Ads

Allis Chalmers B, 1939, sn 13116, wishbone front, new tires. All bearings have been replaced in the transmission, pto housing, and final drives. Steering box and front end are all new. Parade quality paint. Crank start only. New clutch. Starts easily runs nice, $2100. Pictures e-mailed at request; Mike Cristler 530-666-7395 or junktractormike@msn.com (Zamora CA)

Allis Chalmers B, 1939, sn B18114, new fronts and good rears, hydraulics need cylinder, re-done in 1993, $1,500. A/C Model 151 Planter/Lister, $250. Will deliver to Brooks Steam-Up; Russ Shorten 509-382-8925 or 509-876-1795 (Dayton WA)

Allis Chalmers B, 1939. Good rubber front & rear tires, rebuilt carburetor, recent tune-up, new temperature gauge, runs good. Must see to appreciate, $2000; Rich Dorn 951-532-5270 (Mira Loma CA)

Allis Chalmers B, 1941, good paint, tires, sheet metal, new battery, $795; Al Norwood 760-347-6462 (Indio CA)

Allis Chalmers C, 1949, one of 664 built with single front wheel, hydraulics, good tires, re-done in 1993, $1,850. Will deliver to Brooks Steam-Up; Russ Shorten 509-382-8925 or 509-876-1795 (Dayton WA)

Allis Chalmers D-17 gas with AC loader. Nice tin, 3pt, good tires, two speed works fine, power steering. Runs good, $3750 obo; Jake Winn 541-207-8327 or weasel2278@aol.com (Albany OR)

Allis Chalmers D-17 series 4 diesel with AC loader, new cylinder head, clutch, engine seals, good transmission, new paint, excellent condition, $6,850 obo; Chuck Tillman 208-466-1796 (Nampa ID)

Allis Chalmers HD-5, good runner, good undercarriage, blade, drum, canopy, nice cat, $4250; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)

Allis Chalmers HD-7 farm cat, very straight with cab, finish installing steering brakes, $1500; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)

Allis Chalmers KO? Needs total restoration, but complete with blade & drum, $2100; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)

Belt pulley for Ford 8N tractor-factory assembly bolts to the pto shaft, complete and working, $100. Email for photos; John Boehm 530-668-9410 or ratractor-fs@yahoo.com (Woodland CA)

Best 60 with original canopy, runs & drives great. A rare find. Call or email for photos. Check website www.omnitrac.com Dennis Wilkinson 541-963-0139 or dwilkinson@omnitrac.com (Cove OR)

BGS Oliver and Cletrac crawlers: two complete, one for parts, all have Carco model E winches; Don Foltz 503-394-3937 (Scio OR)

Carburetor: Marvel-Schebler DLTX-53. Fits John Deere A '41-47. Excellent condition, $175; Dave Itel 503-678-2307 (Aurora OR)

Case 12-20 Cross motor, 1923, runs and drives good, 100% original and complete. Good tin, poor exhaust manifold, $9,500; Bob Lockwood 970-884-4107 (Bayfield CO)

Case 22-36 threshing machine. 1907 patent date. Complete and working-used to thresh wheat in 2009. Includes all belts, $900. Email for photos; John Boehm 530-668-9410 or ratractor-fs@yahoo.com (Woodland CA)

Case C, 1929 flat belt, on full steel, restored, $4000; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)

Case C, 1929, have two: both are complete and stuck on cut-downs to rubber. One has rare flat belt water pump and 1 set of rear steel, package deal, $1650 obo; Mark Parker 541-619-2692 (Lebanon OR)

Case C, 1937, $2500; Dave Mendoza 408-274-1932 (San Jose CA)

Case DO orchard, 1952. Eagle hitch, good working condition. Hydraulics and lights work. It has only been used about 20 to 30 hours a year for the past 30 years. Always stored indoors, $2500 obo; Charles Saucy 503-362-7120, lv message (Salem OR) [link to photo]

Case L, 1930, on steel, flat belt, new rings, valve grind, new Kingston manifolds with Kingston carb as original equipment, very nice, $4000; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)

Case RC, 1936, restored, new rubber, over center steering, $3000; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)

Case S, 1944, wide front, running when parked, good sheet metal, tires leak air, electric start, tractor complete, $1,200; Dale Eisert 916-652-6636 (Loomis CA)

Case VA wide front, really nice shape, should run, $900; Fred Buldhaupt 253-394-6447 (South Prairie WA)

Case VAH, 1947, high crop, wide front, new front & rear tires & tubes, rough sheet metal, engine free, $1,400; Dale Eisert 916-652-6636 (Loomis CA)

Case VOA parts: hood, side panels, grill, rear fenders, seat frame, belt pulley; Dave Mendoza 408-274-1932 (San Jose CA)

Caterpillar 10 1929, Running when parked, original side panels, good sheet metal, painted yellow, hydraulic blade. $4,150; Dale Eisert 916-652-6636 (Loomis, CA)

Caterpillar 10 narrow gauge complete swing frame with springs, reduced to $250; Cat Ten block, pistons, cam, crank, no pan, head or governor, reduced to $400 obo; Greg Andrade 510-427-8095 or dunefrk@razzolink.com (San Juan Bautista CA)

Caterpillar 10 PT631, wide gauge, restored, all original with engine side curtains, good UC, $9500 beautiful tractor. Call or email for photos. Check website www.omnitrac.com Dennis Wilkinson 541-963-0139 or dwilkinson@omnitrac.com (Cove OR)

Caterpillar 10 through Cat 60 misc used parts. Check website www.omnitrac.com Dennis Wilkinson 541-963-0139 or dwilkinson@omnitrac.com (Cove OR)

Caterpillar 10, 15, 20, 22, 28 parts, call with your needs; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)

Caterpillar 10, have two wide gauge, more than enough parts to make one good one, $2650 for both; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)

Caterpillar 15, complete, ready to restore, $1250; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)

Caterpillar 17-A (early) parts, approximately 3 tons worth, $300; William Transue 530-836-2415 (Cromberg CA)

Caterpillar 20 PL 2328, complete with all original equipment including engine side shields, great to restore, $4500; Check our web site www.omnitrac.com. Call or email for pictures. Dennis Wilkinson 541-963-0139 or dwilkinson@omnitrac.com (Cove OR)

Caterpillar 20, narrow gauge, Big 20, complete, $1500; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)

Caterpillar 20/25 lower fender panels to drawbar, hard to find in good shape, $140; Cat 20/25 carb, complete, reduced to $250 obo; Greg Andrade 510-427-8095 or dunefrk@razzolink.com (San Juan Bautista CA)

Caterpillar 20/25/28 PTO complete, reduced to $350; Cat 20/25/28 radiator grill, $200; Cat 20/25/28 hood, great shape, no tears, no dings, nor any torched holes, $200; Greg Andrade 510-427-8095 or dunefrk@razzolink.com (San Juan Bautista CA)

Caterpillar 22 (early style) air cleaner, complete, reduced to $200; Greg Andrade 510-427-8095 or dunefrk@razzolink.com (San Juan Bautista CA)

Caterpillar 22 belt pulleys, choice, both loose, complete, metal cast pulley or conventional, $600 each; Cat 22 Zenith K5 Propane carb complete with spare gas Zenith carb, $200; Cat 22 Zenith K5 carbs complete, two carbs, $175; Greg Andrade 510-427-8095 or dunefrk@razzolink.com (San Juan Bautista CA)

Caterpillar 22 engine, very nice, $1000; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)

Caterpillar 22 tailseat gas tractor, came from the California Central Valley so all the original metal is all in great shape, light surface rust; nothing is rotted due to the central valley climate. The tractor starts hot or cold with 3 to 4 pulls of the crank. Tractor motor runs pretty good in all gears. The tractor will need the main clutch brake or clutch linkage adjusted. Does not leak water. Has fuel pump though not currently connected. Manifold does have two longitudenal cracks that are currently RTV'ed. Has un-cut orchard fenders and factory footrest, $3200; Greg Andrade 510-427-8095 or dunefrk@razzolink.com (San Juan Bautista CA)

Caterpillar 22, orchard model, high seat, four stroke, $1950; lots of Cat 22 parts machines also; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)

Caterpillar 28, early restoration. Runs good, nice cat, $3950; Cat 28, complete, needs total restoration, $1450; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)

Caterpillar 2S straight dozer for D25U, complete with Cat front unit, good condition, reduced to $2400. Check our web site www.omnitrac.com. Call or email for pictures. Dennis Wilkinson 541-963-0139 or dwilkinson@omnitrac.com (Cove OR)

Caterpillar 30 crawlers: several to choose from, wide & narrow gauge, ready for restoration. Call or email for photos. Check website www.omnitrac.com Dennis Wilkinson 541-963-0139 or dwilkinson@omnitrac.com (Cove OR)

Caterpillar 30 gas tractor crawler dozer, came from the California Central Valley, was always parked in a shed so all the original metal is all in great shape, light surface rust, nothing is rotted. The main clutch snaps into engagement like a new tractor and it steers like a dream. Clutches and brakes work fabulously. Has original fuel tank / valve, original Ensign carb and fuel strainer, and original air cleaner. Undercarriage is very good (60 to 70%). Has all of the original sheet-metal, all four brass tags (sn S6300) making it a 1927 San Leandro Thirty. Tractor even has a BeeGee pump on the back for hydraulically controlling implements but have not tested BeeGee. Can provide lots of pictures, $5500; Greg Andrade 510-427-8095 or dunefrk@razzolink.com (San Juan Bautista CA)

Caterpillar 30 gas tractor, Central Calif. Tractor, no rot or rust, runs great, great brakes and clutches, sn S6300 (San Leandro Thirty). Starts easy hot or cold, $5000; Greg Andrade 510-427-8095 or dunefrk@razzolink.com (San Juan Bautista CA)

Caterpillar 30, have 2, one engine turns over, complete, one has double drums for logging, $3250 each or $6000 for pair; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)

Caterpillar 35 diesel, good looking Cat, final problems, come look, make offer; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)

Caterpillar 35 gas, rough but complete with LaPlant-Chout blade, very unique, complete, ready to restore, $4750; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)

Caterpillar 35, diesel, 1934. Excellent overall condition, easy start, both engines run good. Excellent undercarriage, steering clutches & brakes. New starting engine clutch, new "Hahn" seats, $5900; Gordon Rhode 503-720-6657 cell or 503-678-1961 (Aurora OR) [link to photo]

Caterpillar 40 diesel, runner, to restore, $4950; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)

Caterpillar 44 hydraulic pump, metal lines, switching control valve, no coupler, reduced to $500, or unit with lines, switching control valve, coupler & mounting bracket for $1000 obo; Greg Andrade 510-427-8095 or dunefrk@razzolink.com (San Juan Bautista CA)

Caterpillar 50 5A1255 wide gauge with cable dozer, runs & drives great, good UC, complete with original carb & mag. Runs & drives excellent, $5950. Check website www.omnitrac.com Dennis Wilkinson 541-963-0139 or dwilkinson@omnitrac.com (Cove OR)

Caterpillar 50, gas, complete, ready to restore, $4950; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)

Caterpillar 60 PA13275, complete with all original equipment including cold weather package, includes new fuel tank and fenders, has front pull hook, engine is free. Check website www.omnitrac.com Dennis Wilkinson 541-963-0139 or dwilkinson@omnitrac.com (Cove OR)

Caterpillar 60, have 3, one has double drums. Come look & make offer, one or all; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)

Caterpillar 65, gas, rare, call for info; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)

Caterpillar 75 diesel, runner with blade, come look, make offer; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)

Caterpillar combine, pull with Cat 30, complete, circa early 1930's, $2750; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)

Caterpillar D2 belly pans, have several, some with pull hook. Oil pan for D47U. Rear BEGE hydraulic unit for D2. Call or email for photos. Check website www.omnitrac.com Dennis Wilkinson 541-963-0139 or dwilkinson@omnitrac.com (Cove OR)

Caterpillar D2 belt pulley, $350; D2 fender tank, $200; Greg Andrade 510-427-8095 or dunefrk@razzolink.com (San Juan Bautista CA)

Caterpillar D2 dozer, tilt/angle, compete with hydraulics & grill guard, $1250. Check our web site www.omnitrac.com. Call or email for pictures. Dennis Wilkinson 541-963-0139 or dwilkinson@omnitrac.com (Cove OR)

Caterpillar D2 fender tank, clean, valve, ready to use $200; Greg Andrade 510-427-8095 or dunefrk@razzolink.com (San Juan Bautista CA)

Caterpillar D2 J series: has five. Two of the tractors are wide gauges and three are standard gauges. Four have the main engines loose. Asking $3000 for all five (actually 4.5 tractors) which is approaching scrap price but Rick is not a supporter of scrapping whole tractors and wants to sell to a party who may put one or more of the tractors to use in a restoration or as parts donors to another restoration; for details Rick Hawksworth 559-658-5711 or dunefrk@razzolink.com (Ahwahnee CA)

Caterpillar D2 tilt/angle dozer for D25U, compete with Cat front unit, good condition, $2600. Check our web site www.omnitrac.com. Call or email for pictures. Dennis Wilkinson 541-963-0139 or dwilkinson@omnitrac.com (Cove OR)

Caterpillar D2, sn 13388 late series electric start pony, new paint & seats, repaired as necessary, very straight, $6500; Call or email for photos. Check website www.omnitrac.com Dennis Wilkinson 541-963-0139 or dwilkinson@omnitrac.com (Cove OR)

Caterpillar D2, sn 15155 late series electric start pony, new paint & seats, repaired as necessary, very straight, $6500; Call or email for photos. Check website www.omnitrac.com Dennis Wilkinson 541-963-0139 or dwilkinson@omnitrac.com (Cove OR)

Caterpillar D2-5J orchard model, good UC, very clean, $3750. Check website www.omnitrac.com Dennis Wilkinson 541-963-0139 or dwilkinson@omnitrac.com (Cove OR)

Caterpillar D2-5U 15454 parts: solid front idlers, $450 each; fan guard, $125; hard fenders, $250; floor boards R & L, $125; clutch, steering clutches POR; Check website www.omnitrac.com Dennis Wilkinson 541-963-0139 or dwilkinson@omnitrac.com (Cove OR)

Caterpillar D2-5U series tractors needing minor repair, some with dozers. Several, fix one of your own and enjoy the heritage. Call or email for photos. Check website www.omnitrac.com Dennis Wilkinson 541-963-0139 or dwilkinson@omnitrac.com (Cove OR)

Caterpillar D4 belt pulley, $350; Greg Andrade 510-427-8095 or dunefrk@razzolink.com (San Juan Bautista CA)

Caterpillar D4 parts: drawbar $15, fender $10, grill guard $10, sprocket assembly, $25; Ron Nevins 530-474-3228 or hidcrk@yahoo.com (Shingletown CA)

Caterpillar D4 pto bolt-on belt pulley, works, new repapering of pulley, $400. Located in Orchard IA (Jim Zimmerman's); Greg Andrade 510-427-8095 or dunefrk@razzolink.com (San Juan Bautista CA)

Caterpillar D4, make offer; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)

Caterpillar D4-7U crawler wrecking out. Undercarriage is 80%, elec. start pony motor and diesel motor stuck. Sold clutch and top rollers otherwise complete tractor, $1250 obo for everything. Pictures avail.; Scott Wilkinson 253-606-4246 or swilkinson@potelco.net (Olympia WA)

Caterpillar D4-7U late series 38291, 5-roller, DE start, hydrulics, very nice farm Cat, runs excellent, $5950; Check website www.omnitrac.com Dennis Wilkinson 541-963-0139 or dwilkinson@omnitrac.com (Cove OR)

Caterpillar D4-7U loader, $3500; William Transue 530-836-2415 (Cromberg CA)

Caterpillar Ensign Cat 10/15/20/Pony Ensign carb removed from working tractor, $800; Caterpillar Ensign Cat 10/15/20/Pony Ensign carb lower bowl/body assembly, has mounting ear fracture that was long-ago-repaired, $450; Greg Andrade 510-427-8095 or dunefrk@razzolink.com (San Juan Bautista CA)

Caterpillar NOS parts: fuel pump, crank; Dave Mendoza 408-274-1932 (San Jose CA)

Caterpillar PV15, completely rebuilt manifold setup (intake, exhaust, heatbox) from late Jerry Gast, which has working heatbox. Heat valve rebuilt & fully operational. All studs & brass nuts replaced. Fit for showcase tractor restoration. I can email photos; Greg Andrade 510-427-8095 or dunefrk@razzolink.com (San Juan Bautista CA)

Caterpillar R2 hood, excellent shape, no tears, dings, or torched holes, still reads Caterpillar on it, $250; Automotive grade restoration late model "U" series lights. New sealed beams. Bead blasted, primed, wet-sanded, multiple coats of ebony black, new wiring $350; R2 (4J/6J) Zenith K5 carb and correct p/n elbow, good shape, $300; Greg Andrade 510-427-8095 or dunefrk@razzolink.com (San Juan Bautista CA)

Caterpillar rails & pads for 2 Ton, 10, 15 & 22, some with offset pads. Check website www.omnitrac.com Photos available; Dennis Wilkinson 541-963-0139 or dwilkinson@omnitrac.com (Cove OR)

Caterpillar RD4, 1936, runs good, strong engine, will push a full blade, working cable blade although cable unit needs to be adjusted for raising the blade better, crawler located near Philomath Oregon, $3500; George Best 503-649-3576 (Beaverton OR) [link to photo]

Caterpillar RD4, have two, older collectors, make offer; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)

Caterpillar used parts for 10, 15, 20, 22, 30, 60, D2, D4, 2 Ton; Call or email for photos. Check website www.omnitrac.com Dennis Wilkinson 541-963-0139 or dwilkinson@omnitrac.com (Cove OR)

Caterpillar, large pull-type grader, very good, pull with D-6, $2750; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)

Cletrac AG-6 Crawler, 1946, tracks are in good shape, rebuilt starter, carb, new fuel pump, new correct seat cushions, decent sheet metal and grille, original battery box, runs excellent. Can deliver to Brooks or along the I-5 from So.Cal in July, $3500; Larry Daniels 909-844-2500 (Phelan CA)

Cletrac BG5, 1952, dozer 7ft, new clutch, steering brakes, carb, hydraulic valves & hoses, $4500; Jim Marchiando 805-964-7709 (Santa Barbara CA)

Cletrac F, have two. One is near complete and restorable, the other is for parts, $3500 for both. Email for more info; Stan Good 813-846-2707 (Tampa FL)

Cletrac F, sn 1165-36. Has been in inside storage for 25 years. I believe it is all there. Has a weld repair on left output housing and left pedal pivot is broken out. I have a couple older pictures if you are interested, $7650; Ron Domoe 775-267-0514 (Minden NV)

Cletrac HG-42 parts, have many, call for needs; Daniel Morgan 760-378-3448 or MorganDM95@aol.com (Onyx CA)

Cletrac W, 1920's, have two: one 95% complete, good tin; $2,500; one 75% complete, $1,200; or, the pair $3,000; Bob Lockwood 970-884-4107 (Bayfield CO)

Cletrac, 1934 model " E " 68 un-styled. Striped, sanded, and primered. Ready for paint. Nice crawler but unable to finish. Health issues. RARE find, $1750; Mike Lacey 360-681-4417 (Sequim WA)

Cockshutt 30 with forklift attachment as built for RCAF (Royal Canadian Air Force) approx 1955. Apparently less than 15 built. Everything works and complete, but will need a bit of TLC. Regular 30 drivetrain. Foot throttle, 4 spd trans, hydraulics on belt drive. New front tires, rear incorrect. Looking to trade for Oliver Super 99 or 990 that runs, or take 24 ft+ gooseneck trailer as part trade. Also willing to sell for cash, please contact. Tractor in BC, Canada. Pics available; H Penner 306-783-0274 or tractorboy880@sasktel.net (Yorkton SASK)

Co-op No. 2 1936, wide front, sn 413, Running when parked, new front & rear tires & tubes, painted red, rare rear pto, fast, $2,250; Co-op No. 2, 1936, wide front, sn 206. New front wheels, tires & tubes, toolbox, good sheet metal, engine stuck, square fenders, belt pulley, $1,700; Dale Eisert 916-652-6636 (Loomis, CA)

Co-op No. 3, 1936, wide front, sn 202. Good sheet metal, rare rear PTO, engine stuck, need tires, good for pulling or racing!! $1,200; Dale Eisert 916-652-6636 (Loomis CA)

Earthmaster tractor. Very complete and original. Radiator recored and rebuilt. Carburetor professionally rebuilt. New battery. Hydraulics work. No pto, no implements or parts. Email for more information and pictures, $1600; Fred Gibson 425-486-6082 or fredtrucks@earthtones.com (Bothell WA)

Economy early garden tractor, circa 1945, has new rear tires, recently painted, runs well, nice condition, $650; Jim Harrison 406-543-3275 (Missoula MT) [asked to put it in both tractors and lawn & garden sections]

Farmall 350 side panels, center strip, gas tank; Mark Parker 541-619-2692 (Lebanon OR)

Farmall A, 1941, nice little tractor $800; Warren Harger 541-855-7340 (Central Point OR)

Farmall Cub parts: Just parted complete tractor; John Boehm 530-668-9410 or ratractor-fs@yahoo.com (Woodland CA)

Farmall Cub tractor with sickle bar mower. Tractor has hyd and runs great, tires in good shape and new paint, $2350 obo; Scott Wilkinson 253-606-4246 or swilkinson@potelco.net (Olympia WA)

Farmall Cub with cultivators, plow, as is, $975; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)

Farmall Cub, 1948, overhauled carb, gen, gov, mag, partial paint job, gas tank cleaned, new radiator. Need to assemble, $2,300; Dale Eisert 916-652-6636 (Loomis CA)

Farmall Cub, 1949, runs, painted, decals, nice tires, new wiring, overhauled carb, converted to 12 volt system, $3,200; Dale Eisert 916-652-6636 (Loomis CA)

Farmall Cub, 1959, rebuilt motor, new paint, seat, battery box, radiator, front tires, steering wheel, tool box & carb, $1695; Al Norwood 760-347-6462 (Indio CA)

Farmall Cub, have two. One very solid, runs great with hyd. Other needs restoration, the motor is free. Also have 2 plows, 1 disc, 1 mower, 1 blade, 1 cultivator & owners manual; all for $2500; Gaylord Wilmovsky 360-736-6587 or 360-880-6587 after 5pm (Centralia WA)

Farmall F-12, 1934, single front, starves for gas, rare electric start, rare chain binder hitch lift, good sheet metal & tires, $1,175; Dale Eisert 916-652-6636 (Loomis CA)

Farmall F-12, complete rear end with case, transmission, axles, and excellent factory round spoke rear wheels for 36 inch tires, $450. Also have other F12 parts including a set of factory rear round spokes for 40 inch tires, $250. Email for photos; John Boehm 530-668-9410 or ratractor-fs@yahoo.com (Woodland CA)

Farmall F-14, 1938, on steel. Complete restoration, photos available, $3800; Marc Raubuch 360-269-8942 (Winlock WA)

Farmall H, 11.2x38 straight lug tires on rims, good condition 70% tread, $100 each. Will deliver to Brooks Steam-Up; Russ Shorten 509-382-8925 or 509-876-1795 (Dayton WA)

Farmall H, 1948, with 100 gallon pack tank sprayer & 20 ft booms, $1800; Dennis Pugh 503-538-4135 (Hillsboro OR)

Farmall M gas tractor with factory 8' tandem disk. Runs well, good rubber, $1000. See http://tinyurl.com/nmkepq for pictures; John Laboyteaux 707-923-2670 office or 707 496-3270 cell or helenthemelon@earthlink.net (Redcrest CA)

Farmall M parts tractor. Engine has compression & turn over, no magneto, rear rims bad, $300; 541-980-0982 (Goldendale WA)

Farmall M wide front in good shape, has been sitting for 5yrs, $1500; Mark Parker 541-619-2692 (Lebanon OR)

Farmall M, 1945, original heavy wide front end, set back plate, complete, needs tie rod work. Tires & wheels, cast; Farmall M, 1945, parting out from rear of engine back gone, have most bolt-ons; Clay Shorten 503-625-6497 or btbearclay@gmail.com (Newberg OR)

Farmall M, runs good, needs starter, battery, TLC etc., $650; Larry Daniels 909-844-2500 (Phelan CA)

Farmall Super A, 1949, complete restoration, new tires, Woods belly-mount mower, photos available, $3400; Marc Raubuch 360-269-8942 (Winlock WA)

Ford 2000 tractor, 1963, 4 cylinder gas, good to very good condition, always garaged, 90% tires, good paint, good hydraulics, brakes, motor, clutch, lights, etc, $3500; Marty 636-458-4774 (St. Louis MO)

Ford 2N with Sherman Trans. Runs great. Lots of new parts. Looks nice, $1,700; Steve Blake 971-404-4575 or ncb1978@hotmail.com (Molalla OR)

Ford 2N, 1946, completely rebuilt from top to bottom. New tires, base coat clear coat paint, show quality tractor, $3000 obo; Todd Voth 509-750-2772 (Moses Lake WA)

Ford 2N, 1946, new front tires, new rear tire, electric ignition, 12 v, Sherman hi-lo. New brush hog, single bottom plow, calcium in all tires, no rust; Gary Knittle 360-943-8656 (Olympia WA) [link to photo]

Ford 671 Select-o-Speed, stuck in gear, w/f, original turf tires, has orig cap on pto, had mounted snow blade, $1200; Fred Buldhaupt 253-394-6447 (South Prairie WA)

Ford 800, 1955. Very good tin, paint & tires. Recent ring & valve job. 5-speed, 12 v, front bumper, runs perfect. With 6-1/2 ft, 3-pt modern disc, 5 discs per gang, 4 gangs, 18" blades. Not a cheap light-weight disc, $3850; Hardy McFarland 530-671-2258 (Sutter CA)

Ford 800, reconditioned, runs good, good shape, $4500 obo; Jerry Fischer 503-876-7921 (Willamina OR)

Ford 8N and 9N tractor parts, lots for sale, make offer; Terry Foutch 360-710-4848 (Port Orchard WA)

Ford 8N, runs good, good shape, $2000; Jerry Fischer 503-876-7921 (Willamina OR)

Ford 9N grill, excellent condition; Al Norwood 760-347-6462 (Indio CA)

Ford 9N, 1941, 12V conversion, runs great, new battery. Good condition overall, paint ok, brakes could use work, $1850 obo; Mella-Dee Mayberry 208-337-2020 or mayberrydivers@hotmail.com (Arbuckle CA)

Ford 9N, 1941, running when parked, good sheet metal, good tires, 3pt stuck in down position, new muffler, $2,200; Dale Eisert 916-652-6636 (Loomis CA)

Ford 9N, early aluminum dash, make offer; Fred Buldhaupt 253-394-6447 (South Prairie WA)

Ford 9N, Ford Ferguson, 1940, runs, needs one new rear tire (tire holds air but is cracked), $1000; Todd Voth 509-750-2772 (Moses Lake WA)

Ford/Funk starter housing and bearing (some call it a nose cone). It is hand machined from steel. Not casting that does not hold up. It is for a 8N Ford Funk - 6 cyl 226 cubic engine. Russ or Peggy 253-847-2191 or oldlogtrucker@msn.com (Graham WA)

Fordson Major, 1949, for sale, not running, has all tires, lights, blinkers, stabilizing bar, etc. $800 obo; Janet Good 360-466-3273 (Mt. Vernon WA)

Hyster D4 winch. Complete winch came off D4-7U, drum in great shape. Pictures available, $1000 obo; Scott Wilkinson 253-606-4246 or swilkinson@potelco.net (Olympia WA)

Hyster Logging Bardon drawbar hook for ground skipping, 5 choker mounts, $400; Very unique Hyster logging hitch with 5 choker mounts, should mount on 30 sized tractor $400; Greg Andrade 510-427-8095 or dunefrk@razzolink.com (San Juan Bautista CA)

International 350 Hi-Utility gas, runs, 2000 hrs, fast hitch, 1 hyd. remote all light rare, $1750 obo; Mark Parker 541-619-2692 (Lebanon OR)

International TD-6, 1949, crawler tractor. Has a new overhauled engine with about 350 hours on it. Undercarriage is in real good shape with a brand new set of rails. New paint job last summer. All decals are on this tractor, even though this photo does not show that all are there, $6550; Dale Roth 541-367-6958 (Sweet Home OR) [link to photo]

John Deere 1010 crawler operators/parts manuals, new condition; Fred Buldhaupt 253-394-6447 (South Prairie WA)

John Deere 4020 gas tractor with Westendorf motor & 5 ft box blade. Engine rebuilt once years ago. Twin forks for front for loading big round bales plus bucket. Very good condition, owned 17 years, never pulled a plow, just loaded with it. Front & rear tires about 80%, $8500; Glenn Jobe 503-815-3632 (Tillamook OR)

John Deere 40-C crawler with dozer, recent engine rebuild, $3500; JD 40C crawler with rubber track pads, good sheet metal, $3500. Check website www.omnitrac.com Dennis Wilkinson 541-963-0139 or dwilkinson@omnitrac.com (Cove OR)

John Deere 40T wide, converted to high-crop, runs good, has 950x42" rear tires, new front, has hydraulic leak in left rear arm, price reduced, $3500; Jim Marchiando 805-964-7709 (Santa Barbara CA)

John Deere 40-U, 1954. Runs well, overall good tractor. Comes with Wagner front loader that is not presently on tractor but has been, $3500 obo; Robert Johnson 360-297-2333 (Kingston WA)

John Deere 420W, 1958, 80% restored. New radiator, hoses, cylinder head, gaskets, seat, steering wheel, front tires, front wheels. 5 sp trans, pto, 3 pt hitch with 2-bottom plow, runs great, $3750; Tom Allen 530-409-8091 (Placerville CA) [link to photo]

John Deere 430 Utility tractor, 3 pt, pto, power steering, 5 speed, live power. Has new front tires, steering wheel, shift knob & seat. Has rebuilt starter, water pump & clutch, $3250; Dave Itel 503-678-2307 (Aurora OR)

John Deere 435, 1960, price reduced to $7500 for quick sale. Tires fair, metal good, no ps or fenders. Runs out well but is unrestored. Tractor currently in Montana; Jim Pomajevich 360-606-1233 or pomajevich@aol.com (Vancouver WA)

John Deere 440 crawler, blade, reverser, runs good, $3250; Dick Good 541-619-6090 days, 541-928-7933 eves (Tangent OR)

John Deere 50, wide front, running, sheet metal fair; Dave Gallant 503-663-6535 (Boring OR)

John Deere 60 crankshaft fresh grind, flywheel, rod bearings; Fred Buldhaupt 253-394-6447 (South Prairie WA)

John Deere 60 lots of parts left: crank, head, flywheel, radiator, grill, hood, govnor, long rear axles, draw bar frame, plus misc. part. Call with needs; Mark Parker 541-619-2692 (Lebanon OR)

John Deere 70, sn 7019076, nf, power-trol, pto, stack, $500; Kenny Doyle 559-730-8409 (Exeter CA)

John Deere 720 diesel, 1958, pony start, both engines run good, ready for paint. I have paint, new decals, seat & battery, very good condition, $5100; Al Norwood 760-347-6462 (Indio CA)

John Deere 730D/Electric start, sn 7303125. Just finished installing new tractor clutch plates, going through the PTO clutch, and the steering system. Wide front, with single wheel front avail. $7500; Jack Kohl 503-781-5195 or JKOHL65@JKMANAGE.COM (Wilsonville OR)

John Deere 820, sn 8205679 Both motors run good, tractor clean, just to big to turn around on my small place. $10,000; Jack Kohl 503-781-5195 or JKOHL65@JKMANAGE.COM (Wilsonville OR)

John Deere 830 (2) #1 running, pony, starts and runs good, tires and tin good. #2 pony motor blown, repairable, head cracked. Good tires and tin. Are consecutive serial #s.(3958 & 3959) Sell or trade for other 2cyl. Make offer; Dave Wattenbarger 208-267-7468 (Bonners Ferry ID)

John Deere 830, pony start, straight, runs good, $8000; Dick Good 541-619-6090 days, 541-928-7933 eves (Tangent OR)

John Deere 840 scraper, runs good, new driver tires, $8500; Orman Haenggi 916-207-8200 (East Nicolaus CA)

John Deere A, 1944, sn 529115. This war model has working #5 mower and is ready to mow. Engine overhauled by John Deere shop and starter added. No other wiring. Good runner, $2100. Email for photos; Jim Pomajevich 406-849-5564 or pomajevich@aol.com (Proctor MT)

John Deere A, 1944, sn 534293. This war model runs. Hand start, good hood, no grills, tires fair, needs one pressed steel wheel, $1200; Jim Pomajevich 406-849-5564 or pomajevich@aol.com (Proctor MT)

John Deere A, 1948, good running, good tin, $1500; Dick Good 541-619-6090 days, 541-928-7933 eves (Tangent OR)

John Deere AN, 1937 unstyled, one of 591 built, quite complete but needs restoration, has factory round spoke rear wheels, $4900, Email for photos; John Boehm 530-668-9410 or ratractor-fs@yahoo.com (Woodland CA)

John Deere AN, sn 491443. For parts or restore. Radiator good, good straight tin, 12x38 pressed steel wheels, complete N style front pedestal, partially disassembled but complete, $700 obo; LeRoy Schoot 509-250-0824 or laschoot@wildblue.net (Goldendale WA)

John Deere AO, 1947, unstyled, runs good, unrestored, $4750; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)

John Deere AO, 1953, will paint soon, very nice, $4750; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)

John Deere AR fenders. Brand new reproductions for the later unstyled tractors with the sloped platform. They have surface rust on them, but have never been mounted on a tractor, $500 (CAN) for the pair or best offer; Jon Nessel 604-393-0658 or jonal@shaw.ca (Chilliwack BC)

John Deere AR, unstyled, needs restoration, $2250; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)

John Deere B, 1935 brass tag, restored 10 years ago, new rear tires, front spoke wheels, rear cut-offs. Runs great, good parade tractor. Need room in garage, $4700, Mike Tyler 760-375-3658 or tylermn@earthlink.net (Ridgecrest CA)

John Deere B, 1938, unstyled, rear spokes, good tires, new pistons, rings, valve grind, totally original and nice, $4250; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)

John Deere B, 1944. Good sheet metal, tires, etc. All WWII features. Always been kept under-cover. Have owned for 12 years, known tractor nearly 60 years, $1500; Robert Johnson 360-297-2333 (Kingston WA)

John Deere BN, 1936, sn 26025. Nice tractor, starts easily, new rubber & rear spoke wheels. Just spent $2800 on it for a total $6800 in it. Want $4800 cash, or may trade for old hit & miss engines that are completely restored. Prefer they are no later than 1915, would like a 5 hp or 6 hp Galloway prior to 1915; Alden Barton 509-964-2200 (Ellensburg WA) [link to photo]

John Deere BO Lindeman crawler, 1947, sn 336390, es, blade, undercarriage okay, $8500; Jim Pomajevich 406-849-5564 or pomajevich@aol.com (Proctor MT)

John Deere BO, 1936, rear spokes, good rubber, needs transmission and reassembly but straight, $3250; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)

John Deere BO, 1939, sn 330472, new tires with new fenders yet to installed. Runs very good; Richard Wheeler 509-453-5118 or 509-658-2920 (Yakima WA)

John Deere D parts, 1926 to 1934; Fred Funke 208-877-1698 (Deary ID)

John Deere D, 1929, stuck, missing some parts, $500; Hans Strauss 509-427-8830 (Stevenson WA)

John Deere D, 1935, tin ware a little rough, rear wheel needs repair, $1800; Dennis Pugh 503-538-4135 (Hillsboro OR)

John Deere D, 1937, new rubber, paint, nice condition, $3750; Dick Good 541-619-6090 days, 541-928-7933 eves (Tangent OR)

John Deere D, 1937, sn 134478, new tires on factory round spokes, engine completely rebuilt, new clutch with new fenders yet to be installed, $6000; Richard Wheeler 509-453-5118 or 509-658-2920 (Yakima WA)

John Deere D, 1949, turning brakes, pto, new paint, tires, $4250; Dick Good 541-619-6090 days, 541-928-7933 eves (Tangent OR)

John Deere D, two styled tractors, 1947 and 1948. They have all the sheet metal and are mostly complete, one has a stuck engine, other turns over but not running, tires are poor. Restorable or lots of good parts, $1000 each or both for $1750. Email for photos; John Boehm 530-668-9410 or ratractor-fs@yahoo.com (Woodland CA)

John Deere Dd front spoke wheels, factory wheels, $300; Dave Itel 503-678-2307 (Aurora OR)

John Deere G, 1947, good tin, tires, running, $2450; Dick Good 541-619-6090 days, 541-928-7933 eves (Tangent OR)

John Deere G, 1949, runs great, complete restore, new front tires, rear rubber 90%, $4800; Arland Adams 530-243-8638 (Redding CA)

John Deere G, sn 34906, overhauled in 2007, new tires, paint, sharp; $4500; Jack Kohl 503-781-5195 or JKOHL65@JKMANAGE.COM (Wilsonville OR)

John Deere GP, 1929, sn 204865 overhauled not restored, new valve and guides, new rings and gasket set; Fred Funke 208-877-1698 (Deary ID)

John Deere H, 1941, runs perfectly, unrestored, nice, $3750; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)

John Deere H, 1941, runs, throttle stuck, good sheet metal, fair tires, cute tractor, ready for some TLC!! $1,900; Dale Eisert 916-652-6636 (Loomis CA)

John Deere HN, 1940. Tractor was restored in 2004 and hardly used since then. Stored inside, $6,500. Please email for pictures. Bob Currie 530-333-1028 or tracturs@att.net (Greenwood CA)

John Deere HN, have two. The 1942 is barn fresh complete, not stuck, original tires, new grills and hydraulics. The 1946 is partially restored, partially disassembled. New tires and rims, many new parts, new grills and hydraulics. Both tractors and a ton of used spare H parts, $7,500 or will sell individual tractors for $3,500 each; Chuck Tillman 208-466-1796 (Nampa ID)

John Deere L, (unstyled) 1938, running when parked, overhauled carb, mag, 12 volt system, cleaned gas tank, assembly required, $2,600; Dale Eisert 916-652-6636 (Loomis CA)

John Deere L, 1937. Starts and runs excellent, hand crank, new front tires, one bottom plow. Some surface rust, metal solid, stored in a barn. $1800; Steve Weinert 503-440-1550 or weinert@pacifier.com (Seaside OR)

John Deere LA, 1941, sn 10004. New rear wheels, all new tires, steering wheel, muffler. Rebuilt mag, carb, generator. New paint. Runs good, attached mower, $3000; Cary Hammer 503-551-5954 (Salem OR)

John Deere LA, 1941-1946, sn tag missing. Newly rebuilt engine and external parts, good sheet metal & tires, need to assemble & paint, $4,200; Dale Eisert 916-652-6636 (Loomis CA)

John Deere LA, 1946, starts & runs great, good tires, paint, center blade, rear cultivators, mechanical lifts, $4,250; Dale Eisert 916-652-6636 (Loomis CA)

John Deere Lindeman crawler, late year, very straight, good runner, no blade, $8950; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)

John Deere M Power Depth Controls, plus mounting brackets. Call for price; Daniel Morgan 760-378-3448 or MorganDM95@aol.com (Onyx CA)

John Deere M, no sn. Head overhauled, carburetor rebuilt, excellent rear tires. Frame sanded and primed but tin needs restored. Rear wheel weights sanded and painted. New muffler, belly mount, wheels restored, $1,950; John Evers 503-623-8811 or 503-917-9318 cell (Dallas OR)

John Deere MC or Lindeman tracks, one very nice set, $1250; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)

John Deere MC, total restoration, overhaul, new clutch, brakes, excellent undercarriage, new paint, everything done, no blade, $5750; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)

John Deere MT, single front wheel, 1951, sn 26969. This parts tractor has a very good running engine and transmission. Hear it run. Final drives, steering pedestal are good. Front wheel only; Jim Pomajevich 360-606-1233 or pomajevich@aol.com (Vancouver WA)

John Deere parts: M final drives, hubs, front and rear wheel weights. John Deere A (1943) transmission, rear end. John Deere MT parts, complete engine and transmission, hear it run; Jim Pomajevich 406-849-5564 or Pomajevich@aol.com (Proctor MT)

John Deere parts: No. 1 power block for John Deere A; John Deere 1270R wheels for A or B; 6-spline wheels for early D; Complete radiator with new core for unstyled A; Smooth back covers for A or B; Other parts for unstyled A, B & D; Rick Poulten 208-870-4737 (Kuna ID)

John Deere R manual pony motor starter unit, complete but needs cable, $350; Chuck Tillman 208-466-1796 (Nampa ID)

John Deere R, 1953, in excellent condition, very strong running tractor, no dents or rust outs, straight sheet metal, wheel weights, $5000. Would consider partial trade of interesting tractor or hit & miss engine; Warren Harger 541-855-7340 (Central Point OR)

John Deere unstyled BNH: complete kit to convert your unstyled B to a BNH, includes all front end and rear end parts and wheels. No tag, $2900. Email for photos. John Boehm 530-668-9410 or ratractor-fs@yahoo.com (Woodland CA)

Johnson Work Horse loader, on Farmall M, model 4060, sn 1885, updated from cable trip to hyd bucket, 4-1/2" lift cylinders- 2-1/2" tilt. Manure forks missing. Needs clean-up work on bucket attachment. E for pic. $850; Clay Shorten 503-625-6497 or btbearclay@gmail.com (Newberg OR)

Logging hitch: Very unique and Cat/Hyster 30 (I believe ?) logging hitch with 5 choker mounts, $400; Greg Andrade 510-427-8095 or dunefrk@razzolink.com (San Juan Bautista CA)

Magnetos: Eisemann RT4, rebuildable core loose, $100; Two Eisemann CM4 loose, very rebuildable, excellent cap, real dirty on one side $250; Eisemann CM4, rebuildable cores loose, $250 pair; Greg Andrade 510-427-8095 or dunefrk@razzolink.com (San Juan Bautista CA)

Manuals: Original operators manual for an Oliver 88 tractor, $25 and also a parts manual for a John Deere B, $10; Bill Lengkeek 541-926-8494 or 541-619-8894 (Tangent OR)

Massey Ferguson 165 diesel, good running, good shape, $5500 obo; Jerry Fischer 503-876-7921 (Willamina OR)

Massey Ferguson clone, 245 Perkins 3 cyl. diesel 42 hp. Quick detach loader. SN CI02611MR. Live hydraulics, power steering, tires 13.6 28 95% ROPS comes with 5 ft. howse brush hog. Nice clean tractor, only 601 hrs. All original, $6,000; Glen Carrigan 360-497-0518, can e-mail pictures (Glenoma WA)

Massey Ferguson TO-20, good tin, runs, looks & works good. Rear tires new, 3 pt with rear blade, $2500. Can send photos; Gary Sevold 253-740-3716 (Auburn WA)

Massey Harris 444 std, runs, 1 remote, good shape, $1650 obo; Mark Parker 541-619-2692 (Lebanon OR)

Massey Harris 55 diesel hood, good condition $75 obo; Mark Parker 541-619-2692 (Lebanon OR)

Massey Harris Pony, 1949, runs, good sheet metal, radiator just cleaned, needs to be assembled, $1,950; Dale Eisert 916-652-6636 (Loomis CA)

Massey Harris Pony, good running, good shape, $3500 obo; Jerry Fischer 503-876-7921 (Willamina OR)

McCormick Deering 0-12, 1937, running when parked by previous owner, instruction book, good tires, good sheet metal, $2,400; Dale Eisert 916-652-6636 (Loomis CA)

McCormick Deering 10-20 W, $500; Jim Messick 209-464-8650 (Linden CA) [link to photo]

McCormick Deering 10-20, 1927, running when parked, good sheet metal, original side panels, steel wheels, instruction book, $2,600; Dale Eisert 916-652-6636 (Loomis CA)

McCormick Deering 1020, 1937, paint, sheet metal, tires all good, $1500; Johnnie Everitt 360-573-1510 (Ridgefield WA)

McCormick Deering I-4, have two. One complete, turns over, good shape. Other is a parts tractor. Both for $1650; Mark Parker 541-619-2692 (Lebanon OR)

McCormick Deering O-4, Runs, missing orchard sheet metal, $1450; Mark Parker 541-619-2692 (Lebanon OR)

McCormick Deering O-4, Very early, motor stuck, nice, missing orchard sheet metal, $900; Mark Parker 541-619-2692 (Lebanon OR)

McCormick Deering ODS-6 diesel orchard, stuck, motor all complete, rare tractor, $1750 obo; Mark Parker 541-619-2692 (Lebanon OR)

McCormick Deering T20, no engine, very good tracks, $700; Orman Haenggi 916-207-8200 (East Nicolaus CA) [link to photo]

McCormick Deering, steel wheeled, has not ran for some time. Engine stuck setting in barn. Sheet metal fair, as is most of the tractor. Flange for crack housing is only thing we see broken. Email for pictures, $1000 obo; Fred Gibson 406-257-7596 or mtnwmn1@centurytel.net (Kalispel MT)

Midgi antique tractor crawler dozer military cat, rare. Less than 13 Midgi's exist today. The Midgi was made by a man named Merle Tobias located in Portland Oregon. Tractor has Farmall Super A motor and hydraulics. Tractor runs and drives well, has brand new rails and track pads. Since motor is 4 cylinder IH Super A, that is electric or crank start, parts are easy to get still. Tractor has hydraulic blade with small custom fab root rake. Tractor looks really great; true mini-dozer. Runs and drives very well & has a throatie sound to it when running. Needs only correct rear seat. Tractor show ready as-is or can invest small amount of time and make a real tractor show icon, $5500 obo; Greg Andrade 510-427-8095 or dunefrk@razzolink.com (San Juan Bautista CA)

Minneapolis Moline R, 1948, wide front, running when parked, clean gas tank, paint, decals, new tires/tubes, good sheet metal, $3,400; Dale Eisert 916-652-6636 (Loomis CA)

Minneapolis Moline RTS, restored, new paint, new rubber, $3750; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)

Minneapolis Moline U, runs good, good tin, $1150; Dick Good 541-619-6090 days, 541-928-7933 eves (Tangent OR)

Minneapolis Moline-BG (Avery), 1955, 3pt, rebuilt eng, new tires, only 900 made, rare model. Comes with Mighty Mac chipper and a lift boom, $3000, consider trade; Jim Gardner 503-927-6217 or oldironjim@netscape.net (Vernonia OR)

Misc used parts for JD Lindeman, International TD6 and TD9. Call or email for photos. Check website www.omnitrac.com Dennis Wilkinson 541-963-0139 or dwilkinson@omnitrac.com (Cove OR)

Oliver 60 row crop, runs great with very good tires, good tin, no side panels, $1250. Email for photos; John Boehm 530-668-9410 or ratractor-fs@yahoo.com (Woodland CA)

Oliver 60 row-crop, new tires, runs good, $1150; Dick Good 541-619-6090 days, 541-928-7933 eves (Tangent OR)

Oliver 60, 1940, sn 600779, new 500x15 fronts, excellent 9x32 rears, all original 7" lights, PTO covers, panels & fenders. Motor re-built in school Ag shop-(oops) needs new main bearings, $1,200. Will deliver to Brooks Steam-Up. Russ Shorten 509-382-8925 or 509-876-1795 (Dayton WA)

Oliver 66 row crop, WF, 1953, completely restored, runs & drives great, with new tires all the way around, $6000; Daniel Morgan 760-378-3448 or MorganDM95@aol.com (Onyx CA)

Oliver 66 row-crop, 1953, fully restored, runs great & has new tires all the way around; Daniel Morgan 760-378-3448 or morganM8181@aol.com (Onyx CA)

Oliver OC6 set of tracks, 12" wide bushings do not seem to have much wear. They might also fit the HG, $500. Brush protector for grill for small crawler, round holes 20" wide 34" high, $50. Good fender for Oliver 60 Standard, $50; Ken McDonald 360-896-5114 or oliver88n@comcast.net (Vancouver WA)

Panther antique tractor crawler dozer. Less than 20 to 25 Panthers exist today. This tractor has rebuilt engine, brakes, new $500 radiator, and newly fabricated replacement fuel tank. Undercarriage is great! Each track pad still reads Panther as like new. Have new decals also to go with it. Could be taken to show as-is or with some minimal cosmetic work; could be high-grade show tractor. Has original aluminum fenders and remanufactured steel fenders. Runs and drives very well..Has correct original seat, $5500 obo; Greg Andrade 510-427-8095 or dunefrk@razzolink.com (San Juan Bautista CA)

Perkins 6-354 diesel parts, 3 of everything; Fred Buldhaupt 253-394-6447 (South Prairie WA)

Reproduction parts: Solid brass fuel shutoffs, $55. Primer petcocks, $65. Compression relief petcocks, $67.50. Shift knobs, 2" oval, $12.60. 1-3/8" round knobs, $9.10. Battery box covers for D2-D6, $30. Battery box thumb screws, $18 per pair. Cat 30 and 60 brass radiator tubes with fins, $27.50 and $29.50. Check website www.omnitrac.com Dennis Wilkinson 541-963-0139 or dwilkinson@omnitrac.com (Cove OR)

Rumely DoAll 1930. Original except for radiator, steel wheels, rare tractor to own, needs TLC to run, not stuck, $3,600; Dale Eisert 916-652-6636 (Loomis CA)

Silver King parts- Just parted two tractors with Hercules engine, Email for photos and complete parts list; John Boehm 530-668-9410 or ratractor-fs@yahoo.com (Woodland CA)

Square tube wide front assembly, will fit John Deere A, 60, 620, 630, B, 50, 520, 530, and 70, 720, 730. Complete and ready to install, $1275. Email for photos; John Boehm 530-668-9410 or ratractor-fs@yahoo.com (Woodland CA)

Tires & wheels: John Deer tires and wheels, 750x22, fits JD L, 95% rubber, nice wheels. Asking $1200 obo; Don Braun 541-218-6557 (Grants Pass OR)

Tires: various sizes: two 11.-24; 14-9--28; 14-9-26; 14-9-24; 7.50-16; 16-9-24; Tri-18RS, $100 each; Ron Ludford 530-885-0171 (Auburn CA)

Twin City KTA. Barn stored after 1990's, restoration original and complete, with old style MM umbrella, looks and runs good, $3,600; Bob Lockwood 970-884-4107 (Bayfield CO)

Twin City: 21-32 and 27-44 and early GTA, not running; Chuck Wallace 425-508-3545 (Toledo WA)

Wheel weights: front & rear wheel weights for Ford 2N; Wilson & Nutwell rear wheel weights for Allis Chalmers C; Front & rear wheel weights for McCormick-Deering 10-20; Daniel Morgan 760-378-3448 or MorganDM95@aol.com (Onyx CA)

Wheels: 2 hubs 12 spline axel 2 cast iron centers heavy 2 rims 42" 1 tires 11.42" Good, fits John Deere GM, sn 18782; Fred Funke 208-877-1698 (Deary ID)

Wheels: HD 32-spoke contractor steel wheels for McCormick Deering W-30, $600; Jim Farber 707-894-4759 or tractasaurus @pacific.net (Yorkville CA)

Wheels: one set of 9N-2N-8N tip-toe rear steel, $200; Todd Voth 509-750-2772 (Moses Lake WA)

Wheels: set of rear steel wheels for Ford 9N or 2N. Just missing a few lugs, $200; Steve Blake 971-404-4575 or ncb1978@hotmail.com (Molalla OR)

Wico magneto, 4 cylinder Model X ? Number XH2045, $50; Jack Dale 503-738-5973 (Warrenton OR)