17-24 on rubber; Chuck Wallace 425-508-3545 (Toledo WA) [ed note: we have NO idea what mfg this is!)
Allis Chalmers B, 1939, sn B18114, new fronts and good rears, hydraulics need cylinder, re-done in 1993, $1,500. A/C Model 151 Planter/Lister, $250. Will deliver to Brooks Steam-Up; Russ Shorten 509-382-8925 or 509-876-1795 (Dayton WA)
Allis Chalmers B, 1939. Good rubber front & rear tires, rebuilt carburetor, recent tune-up, new temperature gauge, runs good. Must see to appreciate, $2000; Rich Dorn 951-532-5270 (Mira Loma CA)
Allis Chalmers B, 1941, good sheet metal & paint, runs good, $995; Al Norwood 760-347-6462 (Indio CA)
Allis Chalmers C, 1949, one of 664 built with single front wheel, hydraulics, good tires, re-done in 1993, $1,850. Will deliver to Brooks Steam-Up; Russ Shorten 509-382-8925 or 509-876-1795 (Dayton WA)
Allis Chalmers HD-5, good runner, good undercarriage, blade, drum, canopy, nice cat, $4250; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)
Allis Chalmers HD-7 farm cat, very straight with cab, finish installing steering brakes, $1500; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)
Allis Chalmers KO? Needs total restoration, but complete with blade & drum, $2100; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)
Allis Chalmers WD, 1948-1950?, runs good, has very good sheet metal, needs paint, fair tires, $1100; Ken Morrison 509-773-6994 or 509-250-1747 cell (Goldendale WA)
Belt pulley for Ford 8N tractor-factory assembly bolts to the pto shaft, complete and working, $100. Email for photos. John Boehm 530-668-9410 or ratractor-fs@yahoo.com (Woodland CA)
Best 60 with original canopy, ready for restoration. A rare find. Call or email for photos. Check website www.omnitrac.com Dennis Wilkinson 541-963-0139 or dwilkinson@omnitrac.com (Cove OR)
Big Twin City, 6ft steel wheels, 98% complete; Chuck Wallace 425-508-3545 (Toledo WA)
Case C, 1929 flat belt, on full steel, restored, $4000; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)
Case C, 1929, have two: both are complete and stuck on cut-downs to rubber. One has rare flat belt water pump and 1 set of rear steel, package deal, $1650 obo; Mark Parker 541-619-2692 (Lebanon OR)
Case C, 1937, $2500; Dave Mendoza 408-274-1932 (San Jose CA)
Case CC vegetable tractor, single front wheel with wide extended rear axel, mostly complete, $1250; Irvin Baker 209-599-3496 (Ripon CA)
Case L, 1930, on steel, flat belt, new rings, valve grind, new Kingston manifolds with Kingston carb as original equipment, very nice, $4000; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)
Case LA, 1949, very nice looking tractor, $2000. May trade for something of interest; Warren Harger 541-855-7340 (Central Point OR)
Case RC, 1936, restored, new rubber, over center steering, $3000; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)
Case SC Tractor, model 5328072SC. About 1952. Turns over, but won't start, rusty but sheet metal good. Has fenders. Tires are bad. Is complete. $1000.00 OBO Also have wood saw w/belt for tractor, 2 bottom 14" trip plow on rubber. 2 Case 4 row planters.; Bob Swafford 816-465-3333 (Hamilton MO)
Case SC, 1940-1950?, good sheet metal, have everything to put motor back together, new rebuilt head. I am not a mechanic and not capable of putting it together, $650; Ken Morrison 509-773-6994 or 509-250-1747 cell (Goldendale WA)
Case VA wide front, really nice shape, should run, $900; Fred Buldhaupt 253-394-6447 (South Prairie WA)
Case VAO, full mechanical restoration, less than 20 hours on rebuilt engine, runs great, excellent sheet metal, Eagle hitch, $1795. Email for photos. John Boehm 530-668-9410 or ratractor-fs@yahoo.com (Woodland CA)
Case VOA parts: hood, side panels, grill, rear fenders, seat frame, belt pulley; Dave Mendoza 408-274-1932 (San Jose CA)
Caterpillar 10 narrow gauge complete swing frame with springs, $300; Cat Ten block, pistons, cam, crank, no pan, head or governor, $500 obo; Greg Andrade 510-427-8095 or dunefrk@razzolink.com (San Juan Bautista CA)
Caterpillar 10 PT631, wide gauge, restored, all original with engine side curtains, good UC, $9500 beautiful tractor. Call or email for photos. Check website www.omnitrac.com Dennis Wilkinson 541-963-0139 or dwilkinson@omnitrac.com (Cove OR)
Caterpillar 10, 15, 20, 22, 28 parts, call with your needs; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)
Caterpillar 10, have two wide gauge, more than enough parts to make one good one, $2650 for both; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)
Caterpillar 15, complete, ready to restore, $1250; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)
Caterpillar 17-A (early) parts, approximately 3 tons worth, $300; William Transue 530-836-2415 (Cromberg CA)
Caterpillar 20 PL 2328, complete with all original equipment including engine side shields, great to restore, $4500; Check our web site www.omnitrac.com. Call or email for pictures. Dennis Wilkinson 541-963-0139 or dwilkinson@omnitrac.com (Cove OR)
Caterpillar 20, narrow gauge, Big 20, complete, $1500; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)
Caterpillar 20/25 lower fender panels to drawbar, hard to find in good shape, $140; Cat 20/25 carb, complete, $300 obo; Greg Andrade 510-427-8095 or dunefrk@razzolink.com (San Juan Bautista CA)
Caterpillar 20/25/28 PTO complete, reduced to $350; Cat 20/25/28 radiator grill, $200; Cat 20/25/28 hood, great shape, no tears, no dings, nor any torched holes, $200; Ensign carb Cat 20/25, bowl has surface cracks, $200; Greg Andrade 510-427-8095 or dunefrk@razzolink.com (San Juan Bautista CA)
Caterpillar 22 (early style) air cleaner, complete, $250; Greg Andrade 510-427-8095 or dunefrk@razzolink.com (San Juan Bautista CA)
Caterpillar 22 belt pulleys, choice, both loose, complete, metal cast pulley or conventional, $600 each; Cat 22 Zenith K5 Propane carb complete with spare gas Zenith carb, $200; Cat 22 Zenith K5 carbs complete, two carbs, $175; Greg Andrade 510-427-8095 or dunefrk@razzolink.com (San Juan Bautista CA)
Caterpillar 22 engine, very nice, $1000; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)
Caterpillar 22, orchard model, high seat, four stroke, $1950; lots of Cat 22 parts machines also; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)
Caterpillar 22, tail seat standard gauge, runs & drives. Does not appear to leak water. Oil has slight weep from valve cover. Steers fairly decent. Will need main clutch brake or clutch linkage adjusted, only slows clutch, almost stopping it. Drives & steers fine in all gears. Has fuel pump, though not currently connected. Manifold has 2 longitudinal cracks that are currently RTV'ed. Starts cold or hot on 3-4 pulls. Has uncut orchard fenders, factory footrest. Can provide photos, $3250; Greg Andrade 510-427-8095 or dunefrk@razzolink.com (San Juan Bautista CA)
Caterpillar 28, early restoration. Runs good, nice cat, $3950; Cat 28, complete, needs total restoration, $1450; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)
Caterpillar 2S straight dozer for D25U, complete with Cat front unit, good condition, reduced to $2400. Check our web site www.omnitrac.com. Call or email for pictures. Dennis Wilkinson 541-963-0139 or dwilkinson@omnitrac.com (Cove OR)
Caterpillar 30 crawlers: several to choose from, wide & narrow gauge, ready for restoration. Call or email for photos. Check website www.omnitrac.com Dennis Wilkinson 541-963-0139 or dwilkinson@omnitrac.com (Cove OR)
Caterpillar 30 gas tractor crawler dozer, came from the California Central Valley, was always parked in a shed so all the original metal is all in great shape, light surface rust, nothing is rotted. The main clutch snaps into engagement like a new tractor and it steers like a dream. Clutches and brakes work fabulously. Has original fuel tank / valve, original Ensign carb and fuel strainer, and original air cleaner. Undercarriage is very good (60 to 70%). Has all of the original sheet-metal, all four brass tags (sn S6300) making it a 1927 San Leandro Thirty. Tractor even has a BeeGee pump on the back for hydraulically controlling implements but have not tested BeeGee. Can provide lots of pictures, $5500; Greg Andrade 510-427-8095 or dunefrk@razzolink.com (San Juan Bautista CA)
Caterpillar 30, have 2, one engine turns over, complete, one has double drums for logging, $3250 each or $6000 for pair; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)
Caterpillar 35 diesel, good looking Cat, final problems, come look, make offer; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)
Caterpillar 35 gas, rough but complete with LaPlant-Chout blade, very unique, complete, ready to restore, $4750; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)
Caterpillar 40 diesel, runner, to restore, $4950; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)
Caterpillar 44 hydraulic pump, metal lines, switching control valve, no coupler, reduced to $550; Greg Andrade 510-427-8095 or dunefrk@razzolink.com (San Juan Bautista CA)
Caterpillar 44 hydraulic pump, metal lines, switching control valve, coupler, mounting plate, $1000; Greg Andrade 510-427-8095 or dunefrk@razzolink.com (San Juan Bautista CA)
Caterpillar 50 5A1255 wide gauge with cable dozer, runs & drives great, good UC, complete with original carb & mag. Runs & drives excellent, $5950. Check website www.omnitrac.com Dennis Wilkinson 541-963-0139 or dwilkinson@omnitrac.com (Cove OR)
Caterpillar 50, gas, complete, ready to restore, $4950; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)
Caterpillar 60 PA13275, complete with all original equipment including cold weather package, includes new fuel tank and fenders, has front pull hook, engine is free. Check website www.omnitrac.com Dennis Wilkinson 541-963-0139 or dwilkinson@omnitrac.com (Cove OR)
Caterpillar 60, have 3, one has double drums. Come look & make offer, one or all; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)
Caterpillar 65, gas, rare, call for info; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)
Caterpillar 75 diesel, runner with blade, come look, make offer; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)
Caterpillar combine, pull with Cat 30, complete, circa early 1930's, $2750; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)
Caterpillar D2 belly pans, have several, some with pull hook. Oil pan for D47U. Rear BEGE hydraulic unit for D2. Call or email for photos. Check website www.omnitrac.com Dennis Wilkinson 541-963-0139 or dwilkinson@omnitrac.com (Cove OR)
Caterpillar D2 belt pulley, $350; D2 fender tank, $200; Greg Andrade 510-427-8095 or dunefrk@razzolink.com (San Juan Bautista CA)
Caterpillar D2 dozer, tilt/angle, compete with hydraulics & grill guard, $1200. Check our web site www.omnitrac.com. Call or email for pictures. Dennis Wilkinson 541-963-0139 or dwilkinson@omnitrac.com (Cove OR)
Caterpillar D2 fender tank, clean, valve, ready to use $200; Greg Andrade 510-427-8095 or dunefrk@razzolink.com (San Juan Bautista CA)
Caterpillar D2 J series: has five. Two of the tractors are wide gauges and three are standard gauges. Four have the main engines loose. Asking $3000 for all five (actually 4.5 tractors) which is approaching scrap price but Rick is not a supporter of scrapping whole tractors and wants to sell to a party who may put one or more of the tractors to use in a restoration or as parts donors to another restoration; for details Rick Hawksworth 559-658-5711 or dunefrk@razzolink.com (Ahwahnee CA)
Caterpillar D2 tilt/angle dozer for D25U, compete with Cat front unit, good condition, $2600. Check our web site www.omnitrac.com. Call or email for pictures. Dennis Wilkinson 541-963-0139 or dwilkinson@omnitrac.com (Cove OR)
Caterpillar D2, sn 13388 late series electric start pony, new paint & seats, repaired as necessary, very straight, $6500; Call or email for photos. Check website www.omnitrac.com Dennis Wilkinson 541-963-0139 or dwilkinson@omnitrac.com (Cove OR)
Caterpillar D2, sn 15155 late series electric start pony, new paint & seats, repaired as necessary, very straight, $6500; Call or email for photos. Check website www.omnitrac.com Dennis Wilkinson 541-963-0139 or dwilkinson@omnitrac.com (Cove OR)
Caterpillar D2-5J orchard model, good UC, very clean, $3750. Check website www.omnitrac.com Dennis Wilkinson 541-963-0139 or dwilkinson@omnitrac.com (Cove OR)
Caterpillar D2-5U 15454 parts: solid front idlers, $450 each; fan guard, $125; hard fenders, $250; floor boards R & L, $125; rollers, sprockets POR; Check website www.omnitrac.com Dennis Wilkinson 541-963-0139 or dwilkinson@omnitrac.com (Cove OR)
Caterpillar D2-5U series tractors needing minor repair, some with dozers. Several, fix one of your own and enjoy the heritage. Call or email for photos. Check website www.omnitrac.com Dennis Wilkinson 541-963-0139 or dwilkinson@omnitrac.com (Cove OR)
Caterpillar D4 belt pulley, $350; Greg Andrade 510-427-8095 or dunefrk@razzolink.com (San Juan Bautista CA)
Caterpillar D4 pto bolt-on belt pulley, works, new repapering of pulley, $400. Located in Orchard IA (Jim Zimmerman's); Greg Andrade 510-427-8095 or dunefrk@razzolink.com (San Juan Bautista CA)
Caterpillar D4, 1946, 5T3699 narrow gauge with blade, runs, $3500; Don Foltz 503-394-3937 (Scio OR)
Caterpillar D4, make offer; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)
Caterpillar D4-7U crawler wrecking out. Undercarriage is 80%, elec. start pony motor and diesel motor stuck. Sold clutch and top rollers otherwise complete tractor, $1250 obo for everything. Pictures avail.; Scott Wilkinson 253-606-4246 or swilkinson@potelco.net (Olympia WA)
Caterpillar D4-7U loader, $3500; William Transue 530-836-2415 (Cromberg CA)
Caterpillar Ensign Cat 10/15/20/Pony Ensign carb removed from working tractor, $800; Caterpillar Ensign Cat 10/15/20/Pony Ensign carb lower bowl/body assembly, has mounting ear fracture that was long-ago-repaired, $450; Greg Andrade 510-427-8095 or dunefrk@razzolink.com (San Juan Bautista CA)
Caterpillar NOS parts: fuel pump, crank; Dave Mendoza 408-274-1932 (San Jose CA)
Caterpillar PV15, completely rebuilt manifold setup (intake, exhaust, heatbox) from late Jerry Gast, which has working heatbox. Heat valve rebuilt & fully operational. All studs & brass nuts replaced. Fit for showcase tractor restoration. I can email photos; Greg Andrade 510-427-8095 or dunefrk@razzolink.com (San Juan Bautista CA)
Caterpillar R2 hood, excellent shape, no tears, dings, or torched holes, still reads Caterpillar on it, $250; Automotive grade restoration late model "U" series lights. New sealed beams. Bead blasted, primed, wet-sanded, multiple coats of ebony black, new wiring $350; R2 (4J/6J) Zenith K5 carb and correct p/n elbow, good shape, $300; Greg Andrade 510-427-8095 or dunefrk@razzolink.com (San Juan Bautista CA)
Caterpillar rails & pads for 2 Ton, 10, 15 & 22, some with offset pads. Check website www.omnitrac.com Photos available; Dennis Wilkinson 541-963-0139 or dwilkinson@omnitrac.com (Cove OR)
Caterpillar RD4, have two, older collectors, make offer; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)
Caterpillar RD6, wide track, $3000; Jim Messick 209-464-8650 (Linden CA) [link to photo]
Caterpillar used parts for 10, 15, 20, 22, 30, 60, D2, D4, 2 Ton; Call or email for photos. Check website www.omnitrac.com Dennis Wilkinson 541-963-0139 or dwilkinson@omnitrac.com (Cove OR)
Caterpillar, large pull-type grader, very good, pull with D-6, $2750; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)
Cletrac AG-6 Crawler, 1946, tracks are in good shape, rebuilt starter, carb, new fuel pump, new correct seat cushions, decent sheet metal and grille, original battery box, runs excellent. Can deliver to Brooks or along the I-5 from So.Cal in July, $3500; Larry Daniels 909-844-2500 (Phelan CA)
Cletrac F, sn 1165-36. Has been in inside storage for 25 years. I believe it is all there. Has a weld repair on left output housing and left pedal pivot is broken out. I have a couple older pictures if you are interested, $7650; Ron Domoe 775-267-0514 (Minden NV)
Cletrac, 1934 model " E " 68 un-styled. Striped, sanded, and primered. Ready for paint. Nice crawler but unable to finish. Health issues. RARE find, $1750; Mike Lacey 360-681-4417 (Sequim WA)
Cockshutt 30 with forklift attachment as built for RCAF (Royal Canadian Air Force) approx 1955. Apparently less than 15 built. Everything works and complete, but will need a bit of TLC. Regular 30 drivetrain. Foot throttle, 4 spd trans, hydraulics on belt drive. New front tires, rear incorrect. Looking to trade for Oliver Super 99 or 990 that runs, or take 24 ft+ gooseneck trailer as part trade. Also willing to sell for cash, please contact. Tractor in BC, Canada. Pics available; H Penner 306-783-0274 or tractorboy880@sasktel.net (Yorkton SASK)
Farmall 350 side panels, center strip, gas tank; Mark Parker 541-619-2692 (Lebanon OR)
Farmall A, 1940, has balanced sickle mower, fair tires, not running but will run with cleaning and tuning $1000; Larry Daniels 909-844-2500 (San Bernadino CA)
Farmall A, sn FAA67090, 1940, new tires, electric start, good runner, started restoration, $1600; Harvey Dale 208-743-2689 or hvy-duty@clearwire.net (Lewiston ID)
Farmall C 3-pt hookup, $200; Wallace Weaver 951-685-3195 (Riverside CA)
Farmall Cub parts: Just parted complete tractor. Email for photos. John Boehm 530-668-9410 or ratractor-fs@yahoo.com (Woodland CA)
Farmall Cub tractor with sickle bar mower. Tractor has hyd and runs great, tires in good shape and new paint, $2350 obo; Scott Wilkinson 253-606-4246 or swilkinson@potelco.net (Olympia WA)
Farmall Cub with cultivators, plow, as is, $975; Don Chappell 503-397-0152 or cell 503-679-2726 or janc@ados.net (St Helens OR)
Farmall Cub, 1959, new paint, front tires, radiator, battery, seat, with rebuilt engine, $1695; Al Norwood 760-347-6462 (Indio CA)
Farmall F-12, 1937, good restorable condition, 95% complete, single front wheel, rubber rotted off, stuck, $600; Allen Bankhead 541-273-0354 (Klamath Falls OR)
Farmall F-12, complete rear end with case, transmission, axles, and excellent factory round spoke rear wheels for 36 inch tires, $450. Also have other F-12 parts including a set of factory rear round spokes for 40 inch tires ($250). Email for photos. John Boehm 530-668-9410 or ratractor-fs@yahoo.com (Woodland CA)
Farmall FC, 19??, motor is stuck, 3 pt, complete tractor, $500; Rick Clemens 503-630-3739 (Colton OR)
Farmall H, 11.2x38 straight lug tires on rims, good condition 70% tread, $100 each. Will deliver to Brooks Steam-Up; Russ Shorten 509-382-8925 or 509-876-1795 (Dayton WA)
Farmall H, 1948, with 100 gallon pack tank sprayer & 20 ft booms, $1800; Dennis Pugh 503-538-4135 (Hillsboro OR)
Farmall M gas tractor with factory 8' tandem disk. Runs well, good rubber, $1000. See http://tinyurl.com/nmkepq for pictures; John Laboyteaux 707-923-2670 office or 707 496-3270 cell or helenthemelon@earthlink.net (Redcrest CA)
Farmall M parts tractor. Engine has compression & turn over, no magneto, rear rims bad, $300; 541-980-0982 (Goldendale WA)
Farmall M wide front in good shape, has been sitting for 5yrs, $1500; Mark Parker 541-619-2692 (Lebanon OR)
Farmall M, 1945, original heavy wide front end, set back plate, complete, needs tie rod work. Tires & wheels, cast; Farmall M, 1945, parting out from rear of engine back gone, have most bolt-ons; Clay Shorten 503-625-6497 or btbearclay@gmail.com (Newberg OR)
Farmall M, 1951, runs good, good tires, fast hitch, good sheet metal, $1350; Larry Daniels 909-844-2500 (Phelan CA)
Farmall M, propane, loose, reduced to $500; Wallace Weaver 951-685-3195 (Riverside CA)
Farmall M, runs good, needs starter, battery, TLC etc., $650; Larry Daniels 909-844-2500 (Phelan CA)
Farmall MD, loose, $800; Wallace Weaver 951-685-3195 (Riverside CA)
Farmall O-6, 1946, has hydraulics, runs, sandblasted and primered, tires are fair, no orchard metal, only the hood, grill and inner fenders $1100; Larry Daniels 909-844-2500 (San Bernadino CA)
Farmall Super C, 1951, narrow front, with front & rear cultivator bars, front fertilizer mount, new battery, $700; Randy Seeger 360-333-0475 (Burlington WA)
Farmall Super M, stuck, nice sheet metal, $650; Wallace Weaver 951-685-3195 (Riverside CA)
Ford 2 N, 1946, completely rebuilt from top to bottom. New tires, base coat clear coat paint, show quality tractor, $3000 obo; Todd Voth 509-750-2772 (Moses Lake WA)
Ford 2000 tractor, 1963, 4 cylinder gas, good to very good condition, always garaged, 90% tires, good paint, good hydraulics, brakes, motor, clutch, lights, etc, $3500; Marty 636-458-4774 (St. Louis MO)
Ford 600 with front loader & box scraper, $2895; Al Norwood 760-347-6462 (Indio CA)
Ford 600, 1962, with PS, excellent sheet metal & grill. Good tires, smokes just a little, $1675; Al Norwood 760-347-6462 (Indio CA)
Ford 6000: very rare single-wheel front-end for 1961-1967 Ford 6000, $850; Alan Forrette 503-507-5043 (Stayton OR)
Ford 671 Select-o-Speed, stuck in gear, w/f, original turf tires, has orig cap on pto, had mounted snow blade, $1200; Fred Buldhaupt 253-394-6447 (South Prairie WA)
Ford 800, 1955. Very good tin, paint & tires. Recent ring & valve job. 5-speed, 12 v, front bumper, runs perfect. With 6-1/2 ft, 3-pt modern disc, 5 discs per gang, 4 gangs, 18" blades. Not a cheap light-weight disc, $3850; Hardy McFarland 530-671-2258 (Sutter CA)
Ford 800, reconditioned, runs good, good shape, $4500 obo; Jerry Fischer 503-876-7921 (Willamina OR)
Ford 8N, 1947, in good condition, sn 1178. Tractor comes with an adjustable, 3 point hook-up blade and has new tires all around. The carburetor was recently rebuilt and the tractor has a new battery in it. The tractor runs very well, price reduced to $2,350; Paul Chimits 775-853-1289 or chimitsfamily@sbcglobal.net (Reno NV) [link to photo]
Ford 8N, runs good, good shape, $2000; Jerry Fischer 503-876-7921 (Willamina OR)
Ford 9N, 1940, runs, needs one new rear tire (tire holds air but is cracked), $1000; Todd Voth 509-750-2772 (Moses Lake WA)
Ford 9N, 1941, 12V conversion, runs great, new battery. Good condition overall, paint ok, brakes could use work, $1850 obo; Mella-Dee Mayberry 208-337-2020 or mayberrydivers@hotmail.com (Arbuckle CA)
Ford 9N, early aluminum dash, make offer; Fred Buldhaupt 253-394-6447 (South Prairie WA)
Ford/Dearborn 3 pt. two-way plow, Dearborn # 10-14 with coulters, $150. Will be at Brooks Swap Meet Saturday; Larry Schwarz 360-736-6442 (Centralia WA)
HG Oliver crawler tractor, new grill, tractor ran last year, then put in storage. Bare cat, no attachments, $900; WF Henderson 503-843-3692 (Sheridan OR)
Hyster D4 winch. Complete winch came off D4-7U, drum in great shape. Pictures available, $1000 obo; Scott Wilkinson 253-606-4246 or swilkinson@potelco.net (Olympia WA)
Hyster Logging Bardon drawbar hook for ground skipping, 5 choker mounts, $400; Very unique Hyster logging hitch with 5 choker mounts, should mount on 30 sized tractor $400; Greg Andrade 510-427-8095 or dunefrk@razzolink.com (San Juan Bautista CA)