May 2009 - Tractors & Parts For Sale

All Classified Ads

1918 Emersom Brantingham 1918, model A 12-20, 12th one off the line # 60012. Older restoration. Price reduced to $23,500; Mike Silvera nnn-nnn-nnnn or xxxx@xxxx.xxx (Minden NV)

3 tractors for one low price: 1953 Minneapolis Moline UBN sn 06000026. 1951 Cockshutt 30 sn 29337. 1945 Ford 2N. All run good, all in good condition. Paid over $8000, will sell for $6500; John Calvet nnn-nnn-nnnn or xxxx@xxxx.xxx (Stagecoach NV)

Allis Chalmers 1948 WC. Missing mag, seat, hood and rocker arm assembly. Fenders rough, grill salvageable. Engine condition unknown, but probably seized. This tractor has a very good wide front and decent wheels. Could be restored, but would make a bonanza of parts for another project, $600 obo; George nnn-nnn-nnnn. Pics on request, please email xxxx@xxxx.xxx; George Andreasen nnn-nnn-nnnn (Alturas CA)

Allis Chalmers B, 1955, excellent running tractor, very good paint, new 6v battery, also extra parts tractor, $1195; Al Norwood nnn-nnn-nnnn (Indio CA)

Allis Chalmers D-17, 1964, diesel series 4 with loader. Very good shape, $6,800 obo; Chuck Tillman nnn-nnn-nnnn (Nampa ID)

Allis Chalmers HD-7 farm cat with cab, excellent undercarriage, 371 Detroit, $3250; Don Chappell nnn-nnn-nnnn or cell nnn-nnn-nnnn or xxxx@xxxx.xxx (St Helens OR)

Allis Chalmers K or L, not sure, with blade & winch, rough but complete, $3250; Don Chappell nnn-nnn-nnnn or cell nnn-nnn-nnnn or xxxx@xxxx.xxx (St Helens OR)

Allis Chalmers WD, 1948-1950?, runs good, has very good sheet metal, needs paint, fair tires, $1100; Ken Morrison nnn-nnn-nnnn or nnn-nnn-nnnn cell (Goldendale WA)

Belt pulley attachment for Ford N's. One with steel pulley and one with rubber cover (Rockwod type). $50 each or trade; Fred Gilbertson nnn-nnn-nnnn or xxxx@xxxx.xxx (Creswell OR)

Best 60 with original canopy, ready for restoration. A rare find. Call or email for photos. Check website www.omnitrac.com Dennis Wilkinson nnn-nnn-nnnn or xxxx@xxxx.xxx (Cove OR)

Case 300, 1956 round nose. Starts / runs. Quiet 12-speed transmission, working Eagle hitch. Live PTO. Tires are round and tin is fair, $1300; Dave Pembroke nnn-nnn-nnnn Leave message (Silverton OR)

Case C, 1937, $2500; Dave Mendoza nnn-nnn-nnnn (San Jose CA)

Case CCS, good condition, unrestored. Pictures available. Private treaty, serious inquiry only; Bob nnn-nnn-nnnn or xxxx@xxxx.xxx (Clarksburg CA)

Case DC, two 1949, stuck, $300 each. I can haul; Larry Stills nnn-nnn-nnnn or xxxx@xxxx.xxx (Ontario OR)

Case DO, 1948, loose. No orchard tin, $400 or offer, I can haul; Larry Stills nnn-nnn-nnnn (Ontario OR)

Case SC, 1940-1950?, good sheet metal, have everything to put motor back together, new rebuilt head. I am not a mechanic and not capable of putting it together, $650; Ken Morrison nnn-nnn-nnnn or nnn-nnn-nnnn cell (Goldendale WA)

Case SC, 1941, stuck, $300; SC, tag gone, stuck, good tires, $400 or offer. I can haul; Larry Stills nnn-nnn-nnnn or xxxx@xxxx.xxx (Ontario OR)

Case VA, 1946, w/cable driven loader. Loose. Was running, wire on ignition burned, $450 or offer I can haul; Larry Stills nnn-nnn-nnnn or xxxx@xxxx.xxx (Ontario OR)

Case VAC, 1945, sn 4927978, Rowcrop narrow front with PTO, runs and operates fine. Control valve and hyd pump (needs work) runs off the belt pulley shaft. New front tires and one almost new right rear tire. Remaining rear tire less than 50%. It has original 6V generator, distributor, coil. Needs battery and brake work. 97-page operators manual. Looks, well...has a few dents, but everything is there, someone painted it yellow. I have been using this tractor for 18 years, pulling a plow, disk and stumps, $500, e-mail for photos; Neil Andrews nnn-nnn-nnnn or xxxx@xxxx.xxx (Buckley WA)

Case VAC, 1947, restored. Has Case eagle hitch from later tractor & nice tires. Finished last year for Woodland CA show, $3200; Ellis Bouvier nnn-nnn-nnnn (Woodland CA)

Case VAIW (tug) 1945. Runs good, looks good, but needs a seat. Can provide pictures, $1200; Nick Huff nnn-nnn-nnnn or xxxx@xxxx.xxx (Seabeck WA)

Case VAO, full mechanical restoration, less than 20 hours on rebuilt engine, runs great, excellent sheet metal, Eagle hitch, email for photos, $1795; John Boehm nnn-nnn-nnnn or xxxx@xxxx.xxx (Woodland CA)

Case VOA parts: hood, side panels, grill, rear fenders, seat frame, belt pulley; Dave Mendoza nnn-nnn-nnnn (San Jose CA)

Caterpillar 10 PT631, complete, all original with engine side curtains, good UC, $6500; Call or email for photos. Check website www.omnitrac.com Dennis Wilkinson nnn-nnn-nnnn or xxxx@xxxx.xxx (Cove OR)

Caterpillar 10, have two complete Cats, more than enough parts to make one good one, $3250 for both; Don Chappell nnn-nnn-nnnn or cell nnn-nnn-nnnn or xxxx@xxxx.xxx (St Helens OR)

Caterpillar 15, 20, 22, incomplete for parts, call; Don Chappell nnn-nnn-nnnn or cell nnn-nnn-nnnn or xxxx@xxxx.xxx (St Helens OR)

Caterpillar 15, complete, ready to restore, $1500; Don Chappell nnn-nnn-nnnn or cell nnn-nnn-nnnn or xxxx@xxxx.xxx (St Helens OR)

Caterpillar 20 PL 2328, complete with all original equipment including engine side shields, great to restore, $4500; Check our web site www.omnitrac.com. Call or email for pictures. Dennis Wilkinson nnn-nnn-nnnn or xxxx@xxxx.xxx (Cove OR)

Caterpillar 20, complete, ready to restore, $1500; Don Chappell nnn-nnn-nnnn or cell nnn-nnn-nnnn or xxxx@xxxx.xxx (St Helens OR)

Caterpillar 20, standard gauge Little Twenty (8C4). Tractor is fourth one built. Runs & drives; I have moved it a bunch lately. Has always been barn stored and shows. Tractor had Farmer restoration back 20 to 25 years ago but has seen no use practically since then and mainly collected dust. Tractor is believed to be oldest Little Twenty in existence according to my research. Original Ensign Carb with drop tube and Eisemann GV4 with original impulse cover. Very good undercarriage and very straight original sheet metal, new price, $5500 obo; Greg Andrade nnn-nnn-nnnn with genuine interest and questions or xxxx@xxxx.xxx (San Juan Bautista CA)

Caterpillar 20/25 carb, complete, $300 obo; Greg Andrade nnn-nnn-nnnn or xxxx@xxxx.xxx (San Juan Bautista CA)

Caterpillar 20/25/28 PTO complete, reduced to $350 obo; Greg Andrade nnn-nnn-nnnn or xxxx@xxxx.xxx (San Juan Bautista CA)

Caterpillar 20/25/28 Radiator grill $200; 20/25/28 Drive sprocket covers (complete set of two) $200; 20/25 Lower fender panels to drawbar (hard 2 find N good shape) $140; 20/25/28 Hood, great shape, no tears, no dings, nor any torched holes $200; Greg Andrade nnn-nnn-nnnn or xxxx@xxxx.xxx (San Juan Bautista CA)

Caterpillar 22 (early style) air cleaner, complete, $300; Greg Andrade nnn-nnn-nnnn or xxxx@xxxx.xxx (San Juan Bautista CA)

Caterpillar 22 wide gauge farm tractor with overalls on. A no-frills tractor that runs great. Starts on 1st or 2nd pull after sitting all winter. Paint is faded and chipped as can be expected for a yearly used tractor. This is my old reliable 22. Up till this year I pulled a Kilifer 6'9" disc every year with tractor in the hills at my house, $2500 obo; Greg Andrade nnn-nnn-nnnn with genuine interest and questions or xxxx@xxxx.xxx (San Juan Bautista CA)

Caterpillar 22, orchard model with orchard fenders, needs restoration, $2250; Don Chappell nnn-nnn-nnnn or cell nnn-nnn-nnnn or xxxx@xxxx.xxx (St Helens OR)

Caterpillar 22/20/15 V-grove belt pulley and flat pulley, $450 for both; Greg Andrade nnn-nnn-nnnn or xxxx@xxxx.xxx (San Juan Bautista CA)

Caterpillar 28, early restoration. Runs great, steers great, good paint & seat, no blade, electric start, $4750; Cat 28, fairly complete, good undercarriage, good restoration project, $2500; Don Chappell nnn-nnn-nnnn or cell nnn-nnn-nnnn or xxxx@xxxx.xxx (St Helens OR)

Caterpillar 28/35/40 carb, complete, $350 obo; Greg Andrade nnn-nnn-nnnn or xxxx@xxxx.xxx (San Juan Bautista CA)

Caterpillar 2S straight dozer for D25U, complete with Cat front unit, good condition, $2600. Check our web site www.omnitrac.com. Call or email for pictures. Dennis Wilkinson nnn-nnn-nnnn or xxxx@xxxx.xxx (Cove OR)

Caterpillar 30 crawlers, several to choose from, wide and narrow gauge, ready for restoration. Check our web site www.omnitrac.com Dennis Wilkinson nnn-nnn-nnnn or xxxx@xxxx.xxx (Cove OR)

Caterpillar 30, have 2, one engine free, complete, one with neat double drums, $3250 each or $6000 for pair; Don Chappell nnn-nnn-nnnn or cell nnn-nnn-nnnn or xxxx@xxxx.xxx (St Helens OR)

Caterpillar 30, late style, older restoration, electric start, no blade, very nice, $4750; Don Chappell nnn-nnn-nnnn or cell nnn-nnn-nnnn or xxxx@xxxx.xxx (St Helens OR)

Caterpillar 35 diesel, good looking Cat, needs restoration, won't take much, $4750; Don Chappell nnn-nnn-nnnn or cell nnn-nnn-nnnn or xxxx@xxxx.xxx (St Helens OR)

Caterpillar 35 gas, rough but complete with LaPlant blade, very restorable, $4750; Don Chappell nnn-nnn-nnnn or cell nnn-nnn-nnnn or xxxx@xxxx.xxx (St Helens OR)

Caterpillar 35/40 lower engine panels (complete 4 pieces), pretty good shape and not beat up. $250; Greg Andrade nnn-nnn-nnnn or xxxx@xxxx.xxx (San Juan Bautista CA)

Caterpillar 40 diesel, 1935, sn 1725, rear BeGe Unit, 40% undercarriage, ran good when last used 2years ago. Also Murray Hydraulic Carryall Model M86. $5000 for both; nnn-nnn-nnnn (Corning CA)

Caterpillar 40 diesel, good condition, needs magneto installed on pony, no blade, good Cat, $5750; Don Chappell nnn-nnn-nnnn or cell nnn-nnn-nnnn or xxxx@xxxx.xxx (St Helens OR)

Caterpillar 44 hydraulic pump, metal lines, switching control valve, no coupler, reduced to $550; Greg Andrade nnn-nnn-nnnn or xxxx@xxxx.xxx (San Juan Bautista CA)

Caterpillar 50 5A1255, wide gauge, with cable dozer, good UC, complete with original carb & mag, has been stored inside, ready to run, $5950. Check our web site www.omnitrac.com, Dennis Wilkinson nnn-nnn-nnnn or xxxx@xxxx.xxx (Cove OR)

Caterpillar 50, gas, very rare, complete & very restorable, $5250; Don Chappell nnn-nnn-nnnn or cell nnn-nnn-nnnn or xxxx@xxxx.xxx (St Helens OR)

Caterpillar 60 PA13275, complete with all original equipment including cold weather package, includes new fuel tank and fenders, has front pull hook, engine is free. Check website www.omnitrac.com Dennis Wilkinson nnn-nnn-nnnn or xxxx@xxxx.xxx (Cove OR)

Caterpillar 60 with double drums, Cadillac flat-head V8 power, $4500; Don Chappell nnn-nnn-nnnn or cell nnn-nnn-nnnn or xxxx@xxxx.xxx (St Helens OR)

Caterpillar 60, have 2, enough parts to make one good one, $11000 for both; Don Chappell nnn-nnn-nnnn or cell nnn-nnn-nnnn or xxxx@xxxx.xxx (St Helens OR)

Caterpillar 60, PA9501 chassis complete except radiator, water pump & manifolds, $4500. Good parts tractor or rebuilder. I have the parts to rebuild it; Dennis Wilkinson nnn-nnn-nnnn or xxxx@xxxx.xxx (Cove OR)

Caterpillar 65, rare, restorable, call, $7500; Don Chappell nnn-nnn-nnnn or cell nnn-nnn-nnnn or xxxx@xxxx.xxx (St Helens OR)

Caterpillar 75 diesel, ran 2 years ago, good undercarriage, with cable blade, $6250; Cat 75 diesel, good for parts or restore, mostly complete, $5000; Don Chappell nnn-nnn-nnnn or cell nnn-nnn-nnnn or xxxx@xxxx.xxx (St Helens OR)

Caterpillar combine with header, pull type with engine to power combine, complete, $2500; Don Chappell nnn-nnn-nnnn or cell nnn-nnn-nnnn or xxxx@xxxx.xxx (St Helens OR)

Caterpillar D2 belly pans, have several, some with pull hook. Oil pan for D47U. Rear BEGE hydraulic unit for D2. Call or email for photos. Check website www.omnitrac.com Dennis Wilkinson nnn-nnn-nnnn or xxxx@xxxx.xxx (Cove OR)

Caterpillar D2 belt pulley, $350; Greg Andrade nnn-nnn-nnnn or xxxx@xxxx.xxx (San Juan Bautista CA)

Caterpillar D2 dozer, tilt/angle compete with hydraulics and grill guard, $1250. Check our web site www.omnitrac.com. Call or email for pictures. Dennis Wilkinson nnn-nnn-nnnn or xxxx@xxxx.xxx (Cove OR)

Caterpillar D2 engine with radiator, $950; Don Chappell nnn-nnn-nnnn or cell nnn-nnn-nnnn or xxxx@xxxx.xxx (St Helens OR)

Caterpillar D2 J series: has five. Two of the tractors are wide gauges and three are standard gauges. Four have the main engines loose. Asking $3000 for all five (actually 4.5 tractors) which is approaching scrap price but Rick is not a supporter of scrapping whole tractors and wants to sell to a party who may put one or more of the tractors to use in a restoration or as parts donors to another restoration; Rick Hawksworth nnn-nnn-nnnn or for photos email xxxx@xxxx.xxx (Ahwahnee CA)

Caterpillar D2 skid mounted engine with radiator, $1250; Don Chappell nnn-nnn-nnnn or cell nnn-nnn-nnnn or xxxx@xxxx.xxx (St Helens OR)

Caterpillar D2, J series, new paint, $1750; Don Chappell nnn-nnn-nnnn or cell nnn-nnn-nnnn or xxxx@xxxx.xxx (St Helens OR)

Caterpillar D2, sn 13388 late series electric start pony, new paint & seats, repaired as necessary, very straight, $6500; Call or email for photos. Check website www.omnitrac.com Dennis Wilkinson nnn-nnn-nnnn or xxxx@xxxx.xxx (Cove OR)

Caterpillar D2, sn 15155 late series electric start pony, new paint & seats, repaired as necessary, very straight, $6500; Call or email for photos. Check website www.omnitrac.com Dennis Wilkinson nnn-nnn-nnnn or xxxx@xxxx.xxx (Cove OR)

Caterpillar D2-5J orchard model, good UC and very clean, $3750. Check our web site www.omnitrac.com. Call or email for pictures. Dennis Wilkinson nnn-nnn-nnnn or xxxx@xxxx.xxx (Cove OR)

Caterpillar D2-5U series, have several that need minor repair, some with dozers. Fix one of your own and enjoy the heritage. Check website www.omnitrac.com Dennis Wilkinson nnn-nnn-nnnn or xxxx@xxxx.xxx (Cove OR)

Caterpillar D4 belt pulley, $350; Greg Andrade nnn-nnn-nnnn or xxxx@xxxx.xxx (San Juan Bautista CA)

Caterpillar D4, J series, restorable, $1750; Don Chappell nnn-nnn-nnnn or cell nnn-nnn-nnnn or xxxx@xxxx.xxx (St Helens OR)

Caterpillar D6-9U, 1948, painted Mar-09, $5500; Ellis Bouvier nnn-nnn-nnnn (Woodland CA)

Caterpillar D6-9U, with towing winch & military hydraulic blade that flips over & becomes a clearing blade, runs excellent, good Cat, $7500; Don Chappell nnn-nnn-nnnn or cell nnn-nnn-nnnn or xxxx@xxxx.xxx (St Helens OR)

Caterpillar D7-3T, with Hyster double drums, restorable, $5250; Don Chappell nnn-nnn-nnnn or cell nnn-nnn-nnnn or xxxx@xxxx.xxx (St Helens OR)

Caterpillar NOS parts: fuel pump, crank; Dave Mendoza nnn-nnn-nnnn (San Jose CA)

Caterpillar PV15, sn PV9. Tractor has true matching brass ID tags and PV9 stamped into tranny housing by shifting levers. Manifolds are very good with heatbox linkage. Tractor has toolbox included. Has Wico mag, Vortex Air-Cleaner, Ensign carb, and original crank handle. Rails 70%, pads 90%. Sprockets excellent. Very good front idlers (new bushings) and rollers. Has late model replacement oil filter and gauge. Runs exceedingly well. Good steering clutches and brakes both. Excellent drawbar with minimal wear, $4000 obo; Rick Hawksworth nnn-nnn-nnnn or email for photos to xxxx@xxxx.xxx (Ahwahnee CA)

Caterpillar R2 engine, complete, good shape, $1000; Don Chappell nnn-nnn-nnnn or cell nnn-nnn-nnnn or xxxx@xxxx.xxx (St Helens OR)

Caterpillar rails & pads for 2-Ton, 10, 15 & 22, some with offset pads. Check website www.omnitrac.com Photos available; Dennis Wilkinson nnn-nnn-nnnn or xxxx@xxxx.xxx (Cove OR)

Caterpillar RD-4, have two, very restorable, with blade, $1750 each; Don Chappell nnn-nnn-nnnn or cell nnn-nnn-nnnn or xxxx@xxxx.xxx (St Helens OR)

Caterpillar RD-8, ran 3-4 years ago, has big triple drums for logging, $7500; Don Chappell nnn-nnn-nnnn or cell nnn-nnn-nnnn or xxxx@xxxx.xxx (St Helens OR)

Caterpillar Ten narrow gauge complete swing frame with springs. $300; Cat Ten block, pistons, cam, crank, no pan, head, or governor; $500 obo; Greg Andrade nnn-nnn-nnnn or xxxx@xxxx.xxx (San Juan Bautista CA)

Caterpillar tractor parts: Cat 15 (have 2), Cat D2, D4-7U, D6-9U, D4-7U, D6-9U, Caterpillar 953 tracks 90%, Cat D7 tracks, Cat D3c street tracks, D3c complete set of bulldozer 16" shoes, TD 15-15B hydraulics pump & pistons & clutch; Steve Walenty nnn-nnn-nnnn (Uxbridge MA)

Caterpillar used parts for 10, 15, 20, 22, 30, 60, D2, D4, 2 Ton; Call or email for photos. Check website www.omnitrac.com Dennis Wilkinson nnn-nnn-nnnn or xxxx@xxxx.xxx (Cove OR)

Caterpillar wide PV15 crawler for sale. The motor was rebuilt by prior owner. Tractor is in very, very good condition. Runs & drives. I think pictures I can provide to interested parties will speak for the cosmetic condition of the tractor and outstanding undercarriage the tractor has. Has original Ensign carb and Eisemann GV4. Tractor has rear PTO with sprocket correctly mounted to output shaft. Tractor comes with completely rebuilt manifold setup from late Jerry Gast who has working heat box. I have many pictures I can email. Needs radiator boiled and water pump rebuilt. Price reduced to $5500 with rebuilt Gast manifold or $4500 w/o manifold; Greg nnn-nnn-nnnn, lv msg, or xxxx@xxxx.xxx (San Juan Bautista CA)

Caterpillar, large pull-type grader, manual, good condition, $2500; Don Chappell nnn-nnn-nnnn or cell nnn-nnn-nnnn or xxxx@xxxx.xxx (St Helens OR)

Cletrac 20, 1934-35, rebuilt engine, painted & upholstered, show ready, $4500; Dana Davis nnn-nnn-nnnn eves (Sequim WA)

Clone of MF 245 Perkins 3 cyl. diesel 42 hp. Quick detach loader. SN CI02611MR. Live hydraulics, power steering, tires 13.6 28 95% ROPS comes with 5 ft. howse brush hog. Nice clean tractor, only 601 hrs. All original, $6,500; Glen Carrigan nnn-nnn-nnnn can e-mail pictures (Glenoma WA)

Co-Op 1943, nf, 4cyl, 4spd. Runs well. Recent new rubber and paint. Original cast hood and grill emblems, $5,200; Dave Pembroke nnn-nnn-nnnn Leave message (Silverton OR)

Dearborn trip loader, model 19-8, in good condition, $300; Earl Wacker nnn-nnn-nnnn (Penngrove CA)

Eisemann magneto G4 Edition 3, has sprocket, no impulse, stuck, missing point cap, good core AND Eiseman G4 Edition 2, impulse present and turns freely, good core, $175; Eisemann GV4 loose, has modest spark and second GV4 as rebuildable core, could use rebuild, $250; Eisemann RT4, rebuildable core loose, $100; Eisemann CM4, rebuildable cores loose, $200 ea; Greg Andrade nnn-nnn-nnnn or xxxx@xxxx.xxx (San Juan Bautista CA)

Farmall 350 side panels, center stirp, gas tank; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Farmall A, 1940, with balanced sickle bar mower. Good condition, ran 2 years ago, good rear tires, worn front tires, $1750; Larry Daniels nnn-nnn-nnnn (San Bernadino CA)

Farmall A, new tires, with plow, cultivators & wheel weights. Also a large pile of parts including radiator, hood, front & rear axles, fenders, rear end. I can't tell exactly what all is there, $1000 firm; Warren Roberts nnn-nnn-nnnn (Chehalis WA)

Farmall A, sn Faa67090, 1940, new tires, good running, Started restoration, $1600; Harvey Dale nnn-nnn-nnnn or xxxx@xxxx.xxx (Lewiston ID)

Farmall C 3-pt hookup, $200; Wallace Weaver nnn-nnn-nnnn (Riverside CA)

Farmall Cub 1963 belly mower, $2400; Wallace Weaver nnn-nnn-nnnn (Riverside CA)

Farmall Cub, 1951, 4 new tires, 4-1/2' tandem disc, 5' sickle mower, 4-1/2' front blade, 12" plow, front & rear wheel weights, has not been a rust bucket, excellent condition, price reduced to $2700; Iver Christenson nnn-nnn-nnnn (Vancouver WA)

Farmall Cub, 1951, with hydraulics and belly mower, very straight, complete. Engine needs to be rebuilt. Not stuck, just tired, $1200; Larry Daniels nnn-nnn-nnnn or xxxx@xxxx.xxx (San Bernadino CA)

Farmall Cub, 1965, with fast hydraulic lift. Complete rebuilt motor. Has new front tires, radiator, new 6v battery & battery box, new tool box, steering wheel, plugs & wiring, and factory cushioned seat, $2195 firm; Al Norwood nnn-nnn-nnnn (Indio CA)

Farmall Cub, good condition, needs one rear wheel. Sheet metal is good. Tractor is complete, needs the head put back on & the radiator installed. Has hydraulics, $450; Warren Roberts nnn-nnn-nnnn (Chehalis WA)

Farmall Cub, runs good, has sickle-bar mower, $1000; Howard Ayers nnn-nnn-nnnn or xxxx@xxxx.xxx (Rochester WA)

Farmall F12, old restoration, good tires, sn FS51421 (or F551421), $2300; Skip Butler nnn-nnn-nnnn (Santa Rosa CA)

Farmall F-14 tractor 95% complete and good project tractor for young restorer.$750/offer; Jim Farber nnn-nnn-nnnn or xxxx@xxxx.xxx (CA)

Farmall H, 1946. Tires very good, new tubes on front. Metal very good. A very little work to be perfect. Motor turns over easily, $1500 obo; Bob Edgemon nnn-nnn-nnnn (Springfield OR)

Farmall H, 1947, restored, new tires, $3000; Ellis Bouvier nnn-nnn-nnnn (Woodland CA)

Farmall M, propane, loose, $600; Wallace Weaver nnn-nnn-nnnn (Riverside CA)

Farmall M, wide front, propane, $800; Wallace Weaver nnn-nnn-nnnn (Riverside CA)

Farmall MD, loose, $800; Wallace Weaver nnn-nnn-nnnn (Riverside CA)

Farmall Super M, no tag, ran 2 years ago, good sheet metal, fair tires, $750; Larry Daniels nnn-nnn-nnnn (San Bernadino CA)

Farmall Super M, stuck, apart, $750; Wallace Weaver nnn-nnn-nnnn (Riverside CA)

Ferguson TE, rare, needs starter. Good sheet-metal, $2500; Edward Barbosa nnn-nnn-nnnn (Morgan Hill CA)

Ferguson TO-20, 1949, good hydraulics, tires & paint. Runs good, has quick clutch, $1295; Al Norwood nnn-nnn-nnnn (Indio CA)

Ford 2N, runs and looks great. Tires in great shape and new paint, $1850 obo; Scott Wilkinson nnn-nnn-nnnn or xxxx@xxxx.xxx (Olympia WA)

Ford 641 with Sherman hi\lo transmission. New clutch and exhaust, tires in great shape runs and looks great, $2950 obo; Scott Wilkinson nnn-nnn-nnnn or xxxx@xxxx.xxx (Olympia WA)

Ford 8N not stuck, has steering problems for parts or restore $650; Lowell Hallauer nnn-nnn-nnnn or xxxx@xxxx.xxx (Aurora OR)

Ford 8N with side mount distributor and proof meter. Looks good and runs good, $2500; Fred Gilbertson nnn-nnn-nnnn or xxxx@xxxx.xxx (Creswell OR)

Ford 8N, 1947, in good condition, sn 1178. Tractor comes with an adjustable, 3 point hook-up blade and has new tires all around. The carburetor was recently rebuilt and the tractor has a new battery in it. The tractor runs very well. $2,850; Paul Chimits nnn-nnn-nnnn or xxxx@xxxx.xxx (Reno NV) [link to photo]

Ford 8N, have two: one is $1400 and run goods, looks ugly. The other is better looking and also runs good and is $1800. Or you can have both for $3000. I can send pictures; Nick Huff nnn-nnn-nnnn or xxxx@xxxx.xxx (Seabeck WA)

Ford 9N needs mostly cosmetics and work on 3 point $900; Lowell Hallauer nnn-nnn-nnnn or xxxx@xxxx.xxx (Aurora OR)

Ford Dexta 3 cyl.diesel, 1961. This tractor runs very good. It has a new two-stage clutch, new alt. and battery. Tires are fair. One new rim. Power steering. This is around 35 hp, live power. Very usable tractor, $3000, delivery possible for extra $; Bob nnn-nnn-nnnn (Omak WA)

Fordson on rubber. Engine is stuck, $450; Warren Roberts nnn-nnn-nnnn (Chehalis WA)

Hyster (rare), Caterpillar 22 no controls, needs coupling to PTO shaft, $650. (If you have this coupling please contact me.) Greg Andrade nnn-nnn-nnnn or xxxx@xxxx.xxx (San Juan Bautista CA)

IHC 04 tractor, no orchard tin, very good tires, not running but will, $400; Fred Gilbertson nnn-nnn-nnnn or xxxx@xxxx.xxx (Creswell OR)

International 350 Hi-Utility gas runs 2000 hrs. fast hitch 1 hyd. remote all light rare $1900 obo; Mark Parker nnn-nnn-nnnn (Lebanon OR)

International Cub Lo-Boy, 1958. Very good condition. New wheels, rubber, seat, battery box, correct two-tone paint, front wheel weights, rimguard in rear tires, extra parts. Hydraulic fast hitch, with moldboard plow. Ready for work, fun or parades, $2700 obo; Bill Loder nnn-nnn-nnnn or nnn-nnn-nnnn or xxxx@xxxx.xxx (Carnation WA) [link to photo]

International Farmall A, 1948 with wide front-end. Have 3 model BN tractors: one 1942 and two 1946. All are single front-end. All 4 tractors have some parts missing and could be restored or would make good parts. All 4 tractors for $1000, or will sell separately; Kim Wiggins nnn-nnn-nnnn or xxxx@xxxx.xxx (Vale OR)

International O4 tractor for parts or restoration. Very good tires, orchard hood that as been cut for vertical exhaust, no side panels or orchard fenders, grill and tank are OK. $400; Fred Gilbertson nnn-nnn-nnnn (Creswell OR)

International T6, 1947, with a Bucyrus Erie with angle blade and all hydraulics. Good undercarriage, engine free. Good parts tractor or restoration, located in North San Diego County, $650; Randy Molho nnn-nnn-nnnn (Escondido CA) [link to photo]

International TD14 with cable angle blade, winch, canopy complete tractor (does not run).$2500 or offer/trade for AC crawlers or parts? Mel Ford nnn-nnn-nnnn or xxxx@xxxx.xxx (Redwood Valley CA)

International TD-6 with hydraulic blade. Steering clutch out, have parts. Project tractor, photos available, $2500 or offer/trade for AC crawlers or parts; Mel Ford nnn-nnn-nnnn or xxxx@xxxx.xxx (Redwood Valley CA)

John Deere 350 crawler motor; Steve Walenty nnn-nnn-nnnn (Uxbridge MA)

John Deere 40C with original dozer, 5 roller, good UC, runs very nice, $4500. John Deere 40C with dozer, rebuilder, make offer. Check our web site www.omnitrac.com, Dennis Wilkinson nnn-nnn-nnnn or xxxx@xxxx.xxx (Cove OR)

John Deere 40T wide, converted to high-crop, runs good, has 950x42" rear tires, new front, has hydraulic leak in left rear arm, $3900; Jim Marchindo nnn-nnn-nnnn (Santa Barbara CA)

John Deere 40U with 3 pt, rebuilt engine, good tires, good tin & paint, new seat & battery, $2250; Don Chappell nnn-nnn-nnnn or cell nnn-nnn-nnnn or xxxx@xxxx.xxx (St Helens OR)

John Deere 40U, wide front, runs, needs work, $1200 obo; Dick Good nnn-nnn-nnnn day, nnn-nnn-nnnn eve (Tangent OR)

John Deere 420 C, blade, winch, canopy, 5 roller, NEW engine, $5250; Don Chappell nnn-nnn-nnnn or cell nnn-nnn-nnnn or xxxx@xxxx.xxx (St Helens OR)

John Deere 440 crawler with dozer, rebuilder, make offer. Check our web site www.omnitrac.com, Dennis Wilkinson nnn-nnn-nnnn or xxxx@xxxx.xxx (Cove OR)

John Deere 450 crawler undercarriage; Steve Walenty nnn-nnn-nnnn (Uxbridge MA)

John Deere 50, 1955, single front wheel tractor, sn 5025298. Good tires, hand clutch, power steering. Runs good, still being used, $2500; LD Sorensen nnn-nnn-nnnn (Klamath Falls OR)

John Deere 60, 1953 gas tractor with tricycle front. Tractor runs good, sheet metal poor, $995; JD 60, 1953 on factory propane. New paint & decals, $3195; Larry Norwood nnn-nnn-nnnn (Bradford AR)

John Deere 620, single front, good runner, 3pt pto remotes ps ,original paint, $4500 obo; Glenn nnn-nnn-nnnn (Mt Vernon WA)

John Deere 801 3pt, $500; Gene nnn-nnn-nnnn or nnn-nnn-nnnn (Doyle CA)

John Deere 830, pony start, good condition, $8250; Dick Good nnn-nnn-nnnn day, nnn-nnn-nnnn eve (Tangent OR)

John Deere A long hood slant dash BG pump, good sheet metal, stuck, $600 or will part; Gene nnn-nnn-nnnn or nnn-nnn-nnnn (Doyle CA)

John Deere A, 1936, with round rear spoke wheels, sn 441218. Has shutters. In dry storage many years. $2000; Roy Phelps nnn-nnn-nnnn (Newport WA)

John Deere A, 1945, good sheet metal and tires, complete. Ran 2 years ago, new mag. I am in the process of getting it running, $1750; Larry Daniels nnn-nnn-nnnn (Phelan CA)

John Deere A, 1945, runs with like new tires. Includes JD A parts tractor with JD loader, $1,200; Roy Phelps nnn-nnn-nnnn (Newport WA)

John Deere A, 1945, with anteater wide front end. Only 318 made. Tractor has Lindeman hitch with tool bar and ditchers. Tractor is in excellent condition, $2,500; Roy Phelps nnn-nnn-nnnn (Newport WA)

John Deere AN, 1937 unstyled, one of 591 built, quite complete but needs restoration, has factory round spoke rear wheels, Email for photos; John Boehm nnn-nnn-nnnn or xxxx@xxxx.xxx (Woodland CA)

John Deere AR, 1935 brass tag. Full set Kay Bruner wheels w/rear wheel weights. Have new fenders, new hood, new grill screen & curtain, all new tires & tubes, much more. Tractor shedded most of life. Restoration started, unable to finish, $3500; John nnn-nnn-nnnn (Medford OR)

John Deere B rear axles and bull gears, have two, $50 obo; John Wilkens nnn-nnn-nnnn or xxxx@xxxx.xxx (Summerville OR)

John Deere B, 1937, new paint and rear tires, runs good, $2150; Howard Ayers nnn-nnn-nnnn or xxxx@xxxx.xxx (Rochester WA)

John Deere B, 1941, recent rings & valve job, good sheet metal & rear tires, new front tires. Been kept under cover for years. Have owned for 24 years, $1500; Robert S Johnson nnn-nnn-nnnn (Kingston WA)

John Deere B, 1944, good sheet metal & tires. All WWII features, been kept inside always. Have owned 12 years, have known tractor nearly 60 years, $1500; Robert S Johnson nnn-nnn-nnnn (Kingston WA)

John Deere B, styled, electric start, full cultivators, $1650; Dick Good nnn-nnn-nnnn day, nnn-nnn-nnnn eve (Tangent OR)

John Deere BN, nice tractor, long axles, 42" wheels, good 42" tires. Needs intake manifold & a few small parts, $1000; Gene nnn-nnn-nnnn or nnn-nnn-nnnn (Doyle CA)

John Deere BO Lindemen crawler, restored, will trade for a 50 hp 4wd bucket loader diesel tractor; Mark Standley nnn-nnn-nnnn, cell (Clatskanie OR)

John Deere D, 1927, on steel, $3500; Dick Good nnn-nnn-nnnn day, nnn-nnn-nnnn eve (Tangent OR)

John Deere D, 1937, on steel, $2500; Dick Good nnn-nnn-nnnn day, nnn-nnn-nnnn eve (Tangent OR)

John Deere D, styled, electric start pto, turning brakes, good paint, $4250; Dick Good nnn-nnn-nnnn day, nnn-nnn-nnnn eve (Tangent OR)

John Deere G, 1947, electric start good condition, $2400; Dick Good nnn-nnn-nnnn day, nnn-nnn-nnnn eve (Tangent OR)

John Deere G, 1952, sn 60337; Warehouse date 03/13/1952; Ship date 3/13/1952; Branch: Dallas, Texas; Destination Laredo, TX TW396. This tractor was an export to Mexico. It has been brought back to the U.S. This is what I have done to the tractor: New tires: 13.6 38 Rear 600.16 Front tires. The following has been rebuilt: steering box, shutters, water pump, carburetor, head with valves, valve springs and guides, high compression aluminum pistons and rings, new cold gas manifold, magneto rebuilt with hot coil, clutch rebuilt with bearings, bushings & linkage, starter rebuilt, fan belt & generator. New steering wheel, battery box & battery, PTO shield, seat cushion and backrest, gauges, brake bands. Hydraulics work good. New paint & decals. Sheet metal all good. This is a very nice looking tractor, $5,000 firm. Also John Deere AR, 1936, sn 253296. Completely restored this tractor 10 yrs ago. New grill; new fenders; head rebuilt with valves & guides; has full set of steel wheels plus new tires on rear,

rubber skid rings on front. Build date 9/14/36; Ship date 9/16/36; Destination: Arcadia, CA. Asking $5,000 or take both tractors for $9,000; Don Graham nnn-nnn-nnnn or xxxx@xxxx.xxx or xxxx@xxxx.xxx (Cottonwood AZ)

John Deere GP Standard, 1930, nice steel wheels with Schmeiser lugs, pretty complete, $1750, email for photos; John Boehm nnn-nnn-nnnn or xxxx@xxxx.xxx (Woodland CA)

John Deere GP, 1929, on rubber, needs restored, $3750; Dick Good nnn-nnn-nnnn day, nnn-nnn-nnnn eve (Tangent OR)

John Deere L, 1939, no tag, side shift, V-belt pulley. Excellent running condition, earlier restoration with new paint and rubber! Email photos available, $3500; Ron Wiersma nnn-nnn-nnnn or xxxx@xxxx.xxx (Lynden WA)

John Deere L, 1940, tag, good condition, hand start, $2150; Dick Good nnn-nnn-nnnn day, nnn-nnn-nnnn eve (Tangent OR)

John Deere LA parts: Two motors, misc hoods, gas tanks, radiator, front skirts etc, reasonable; Jim Farber nnn-nnn-nnnn or xxxx@xxxx.xxx (CA)

John Deere LA, 1939, no serial # tag, new tires, new paint, hand start, restored 1 yr ago, parade ready, $3500; John Bold nnn-nnn-nnnn (Turlock CA)

John Deere LA, 1940, runs good, complete, belt pulley, full cultivators, $5500; Augie Scoto nnn-nnn-nnnn (Atwater CA)

John Deere LA, 1941, in good condition, sn L4002-T. Tractor comes with two blade type plows, new tires all around. Has a new carburetor and exhaust pipe. This rig will run, but needs a new battery, $2,950; Paul Chimits nnn-nnn-nnnn or xxxx@xxxx.xxx (Reno NV) [link to photo]

John Deere Lindeman dozer attachment complete with original hydraulic pump, $2500; Check website www.omnitrac.com Dennis Wilkinson nnn-nnn-nnnn or xxxx@xxxx.xxx (Cove OR)

John Deere M w/push blade, runs great, fenders, lites, new rad, all tin good ex grill, good tires, quiet trans, can work or show; Glenn nnn-nnn-nnnn or xxxx@xxxx.xxx (Mt Vernon WA)

John Deere M, 1948, pretty good tractor but needs front axle & steering parts. Kept under cover, $1250; Robert S Johnson nnn-nnn-nnnn (Kingston WA)

John Deere M, farm fresh, runs good, has spring-tooth buck rake, 2-bottom plow, sickle bar mower, $3000; Gene nnn-nnn-nnnn or nnn-nnn-nnnn (Doyle CA)

John Deere M, good wide front, good running condition, farmhand loader, 3 point with drag blade, sheet metal good and paint is faded some. Seat frame is bent from the 3 point but works just fine. Has 2 sets of rear tires and tire chains for winter, $3,500; Rod nnn-nnn-nnnn or xxxx@xxxx.xxx (Meridian ID)

John Deere M, parting out; Dick Good nnn-nnn-nnnn day, nnn-nnn-nnnn eve (Tangent OR)

John Deere MC, 1949, sn11568. Mechanically correct. Replaced final drives, propeller shaft, transmission input shaft, rebuilt engine, No hydraulics. New pins/bushings one side, other side is good, excellent rails, typical pads, good hood, grille repaired, Not painted, nothing welded, (except gas lever), new voltage regulator needs gauges and wire harness. Extra set of 14" pads, $2000 obo, Bob Ward, nnn-nnn-nnnn, leave message, shown weekends only. (Mt Vernon WA)

John Deere MC, orchard cat, will part out, call for info; Don Chappell nnn-nnn-nnnn or cell nnn-nnn-nnnn or xxxx@xxxx.xxx (St Helens OR)

John Deere MT, 1950, with tricycle front end, hydraulic cultivators front & back, excellent running tractor, $2195; Larry Norwood nnn-nnn-nnnn (Bradford AR)

John Deere parts tractors: one 1942 model B, and one 1939 model A, $300 each or will sell parts off separately; Kim Wiggins nnn-nnn-nnnn or xxxx@xxxx.xxx (Vale OR)

John Deere unstyled L, mostly restored, photos available. Best offer over $4000; Gene nnn-nnn-nnnn or nnn-nnn-nnnn (Doyle CA)

Loader assembly, complete with valves, hoses, bucket, etc for John Deere 440 Industrial crawler, $1250 obo; Matt nnn-nnn-nnnn (Ukiah CA)

Massey Ferguson 135 gas, new tires & paint, 1465 hours. Two suitcase weights on front, $5000; Gary White nnn-nnn-nnnn (Yamhill OR)

Massey Harris 444 std. Runs, 1 remote good shape, $1650 obo; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Massey Harris 55 diesel hood, good condition, $75 obo; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Massey Harris General Purpose, good condition, unrestored. Pictures available. Private treaty, serious inquiry only; Bob nnn-nnn-nnnn or xxxx@xxxx.xxx (Clarksburg CA)

Massey Harris Pony: have two. One runs, one stuck. Both have hydraulics, some parts plus plow disk and sickle mower, $2000, can deliver; Ross Mattson nnn-nnn-nnnn or xxxx@xxxx.xxx (Spokane WA)

Massey Harris radiator for 101 or 30, $100; Stuart Wade nnn-nnn-nnnn or nnn-nnn-nnnn or xxxx@xxxx.xxx (Chico CA)

Massey Harris Wallis 12-20, good condition, unrestored. Pictures available. Private treaty, serious inquiry only; Bob nnn-nnn-nnnn or xxxx@xxxx.xxx (Clarksburg CA)

McCormick Deering 15-30 side curtains, very nice condition, $300; Mike Jerue nnn-nnn-nnnn (Cheney WA)

McCormick Deering motor out of a T9. Will fit a W9 and I9 also. 1943 per casting code. Complete. $500; Morgan Dunn. nnn-nnn-nnnn or xxxx@xxxx.xxx (Rochester WA)

McCormick Deering O-4, runs, missing orchard sheet metal, $1650; Mark Parker nnn-nnn-nnnn (Lebanon OR)

McCormick Deering O-4, very early, motor stuck, nice, missing orchard sheet metal, $1200; Mark Parker nnn-nnn-nnnn (Lebanon OR)

McCormick Deering ODS-6 diesel orchard stuck motor all complete, rare tractor, $1950 obo; Mark Parker nnn-nnn-nnnn (Lebanon OR)

McCormick Deering two I-4s Complete, turns over, good shape. Other is a parts tractor both for $1950; Mark Parker nnn-nnn-nnnn (Lebanon OR)

McCormick Deering W-30, 1936, on new rubber, runs good, for sale or trade for stationary engines and drag saws; Mike Jerue nnn-nnn-nnnn (Cheney WA)

Michigan loader, Cummins engine runs good, 2 1/2 yard bucket, rear wheel steer (not articulated), tires- round and black, no canopy, no brakes, $2850 or offer/trade for AC crawlers or parts? Mel Ford nnn-nnn-nnnn or xxxx@xxxx.xxx (Redwood Valley CA)

Minneapolis Moline 5 Star. Has a loader and runs great, $2100. Pictures available; Nick Huff nnn-nnn-nnnn or xxxx@xxxx.xxx (Seabeck WA)

Minneapolis Moline BG, 1955, rare, only 900 made (transition from Avery). New tires, 20 hrs on rebuilt engine, runs and operates fine, has 3pt, and remote hyd., comes with a 3pt Mighty Mac chipper and lifting boom arm, pics available, $3000; Jim Gardner nnn-nnn-nnnn or xxxx@xxxx.xxx (Vernonia OR)

Minneapolis Moline GB, model D425-6, sn 06701263, 6 cyl diesel tractor, $1000; Richard Weggesser nnn-nnn-nnnn (Onyx CA)

Minneapolis Moline Jetstar 3 Super, two tractors, 1963 & 1965. 3 pt, wide front, good tires, metal. Start and run great, $2495 each obo. Or trade for Jeep? Dave Wattenbarger nnn-nnn-nnnn (Naples ID)

Oliver 1948 60 RC has engine side panels, tires 80% rubber $1000; Hubert Bierly nnn-nnn-nnnn (Bend OR)

Oliver 60 hood, $75; Pat Nash nnn-nnn-nnnn (Oregon City OR)

Oliver 70 side curtains, excellent condition, with original paint, $350; Mike Jerue nnn-nnn-nnnn (Cheney WA)

Oliver 77, 1953, good shape. Engine has knock. No side panels, $400 or offer, I can haul; Larry Stills nnn-nnn-nnnn or xxxx@xxxx.xxx (Ontario OR)

Oliver OC3 crawler with hydraulic blade, engine is stuck, tracks are free and in good condition, steers ok etc, also includes another frame with complete engine (not stuck) trans, final drive, another complete engine and transmission that are in good condition/not stuck. Please call for more info, $1400; Larry Daniels nnn-nnn-nnnn (Phelan CA)

Oliver OC-3 parts tractor, $200; Donald King nnn-nnn-nnnn (Newberg OR)

Oliver OC4 crawler, new radiator, 12 volts, hydraulics, blade, $1500 obo; Darrell Deschand nnn-nnn-nnnn (Brush Prairie WA)

Oliver Super 55 gas, new tires, battery & paint. Rebuilt 3 pt, new bearings, transmission rear end & axles, $4000; Gary White nnn-nnn-nnnn (Yamhill OR)

Oliver/Cletrac BGH, 1952. Carco drum, Holt blade, rebuilt engine, new sprockets, good rails, 100 hrs since rebuild. Show or work, $5000 obo; Dana Davis nnn-nnn-nnnn eves (Sequim WA)

Radiator for 101 or 30 model, $90; Stuart Wade nnn-nnn-nnnn, cell nnn-nnn-nnnn (Chico CA)

Rear wheel extensions, might be for a John Deere, there is some traces of yellow paint, they are 45 3/4 inches in diameter, and 6 inches wide, $300 obo; Mike Jerue nnn-nnn-nnnn (Cheney WA)

Reproduction parts: Solid brass fuel shutoffs $55, primer petcocks $65, compression relief petcocks $67.50. Shift knobs 2" oval $12.60, 1-3/8 round knobs $9.10. Battery box covers for D2-D6 $30, battery box thumb screws $18 per pair. Cat 30 and 60 brass radiator tubes with fins $27.50 and $29.50. Check our web site www.omnitrac.com, Dennis Wilkinson nnn-nnn-nnnn or xxxx@xxxx.xxx (Cove OR)

Silver King parts- Just parted two tractors with Hercules engine, Email for photos and complete parts list; John Boehm nnn-nnn-nnnn or xxxx@xxxx.xxx (Woodland CA)

STOLEN: 1954 Farmall Super H, Stage II stolen from Meridian, ID sometime in February 2009. Tractor is in fair shape, no carburetor, battery box rusted, three-point. Also 2 toolbars and 6 John Deere 71 planter units. If you have information about the whereabouts please call nnn-nnn-nnnn

Terratrac GT 25 crawler, 1950, first year of manufacture. Later became JI Case. Standard Continental engine, free. It's a worn out basket-case but basically all there including hydraulic blade, $700 firm; Quentin Robbins nnn-nnn-nnnn (Woodland WA)

Tire: 12.4X24, 4 ply. Tire had a cut in the side and was sent back to the factory for repair. It was repaired and revolcanized in the factory mold. Looks like new strong as new, $100; Ken nnn-nnn-nnnn or xxxx@xxxx.xxx (Vancouver WA)

Tire: Montgomery Ward 10x36 4-ply (11-2--36) rear tractor tire, 80% tread, good shape, $125; Del Riel nnn-nnn-nnnn (Yakima WA)

Tires 14.9 38 45 degree bar still have nubs on tread on John Deere 9-hole wheels, no rust, $750; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Tractor for sale: Agricat for sale (possibly Model F; year unknown); Completely restored in 2008; 10 HP Kohler eng, elect start, new battery, full hydraulics, rear mounted rippers, blade for front (not installed), front loader all hyd (not installed), 2nd parts tractor and manual. $4000 obo; Al Johnson nnn-nnn-nnnn (Loomis CA)

Wheel weight for John Deere LA, H, A, $85 pair; Stuart Wade nnn-nnn-nnnn, cell nnn-nnn-nnnn (Chico CA)

Wheel weights: Twelve 100-lb rear wheel weights from Oliver 1950, $50 ea. Four 100-lb rear wheel weights off Co-Op E-3, $50 ea; Gary White nnn-nnn-nnnn (Yamhill OR)

Wheel: one rear steel wheel for John Deere A with extension, sell or trade; Dave Itel nnn-nnn-nnnn (Aurora OR)

Wheels: nice set of 18" John Deere spoked round wheels and new tires, $500; Don nnn-nnn-nnnn or xxxx@xxxx.xxx (Winnemucca NV)