Allis Chalmers B sn 55494, new seat, paint, cultivator, plow, $1500 obo; Jerry Isakson 503-668-5608 (Sandy OR)
Allis Chalmers B, good tin & tires, $825; Marvin Spacek 541-874-3164, leave msg or spacek@pioneer-net.com (Riddle OR)
Allis Chalmers B, parts tractor, $250; Albert Benamati 530-934-4790 (Willows CA)
Allis Chalmers B, parts tractor, all there except carburetor, hood & clutch. Accessories are in a box. Tractor has all tires, can be pulled onto a trailer to load, $250; Albert Benamati 530-934-4790 (Willows CA)
Allis Chalmers D-17 First Series, gas, wide front, good tires & condition, new paint, $4250; Russ Shorten 406-962-3912 (Joliet MT)
Allis Chalmers G, engine has had a recent valve job, runs well, sheet metal is in very good to excellent condition. Recent paint, no implements, has rear mounted implement bar. Front frame has an 11" extension, very good to excellent, very rare original 6x30 rubber on rear. An overall above average G, $3000; Don Nelson 530-877-8677 or maxnels@infs.net (Paradise CA)
Allis Chalmers G, needs some engine work, also some parts available; Jim Robinett 206-713-3441 or tractrmnul@aol.com (Federal Way WA)
Allis Chalmers HD 3 crawler loader, has heavy-duty Gearmatic winch, nearly new pads with grousers, $5500 obo; Russ Raymond 509-925-5283 (Ellensburg WA)
Allis Chalmers motor from combine, complete, very low hours, same as model B tractor, $500 obo; Jerry Isakson 503-668-5608 (Sandy OR)
Allis Chalmers road grader, WD model, 1944, 6v electric, new tires on front, runs great, asking $3500; Russell Dusky 503-648-7875 (Hillsboro OR) [see photo]
Allis Chalmers WD 45 & WD wide front, $450; Lyle Jorgenson 801-721-5968 (South Weber UT)
Allis Chalmers WD 45, wide front, runs good, $1850; Chuck Tillman 208-466-1796 (Nampa ID)
Allis Chalmers WD-WD 45 pair wheels/rims/tubes/tires. 8-hole wheels with cleaned & lubed eccentric rim locks, no cracks or welds, 12" x 28" power adjust rims with rails, excellent condition, no rust, painted silver. Two new (1 yr old) tubes, no water/fluid, two 14.9 x 28" Firestone tires with 10% tread used for pulling. Package deal $325; Tom Welch 360-678-1473 or t-dracing@coupeville.net (Coupeville WA)
Allis Chalmers WF, narrow front end, new tires, runs great, mid-mount sickle bar mower, $1900; Clark Monson 775-846-6385 or drillmow@amigo.net (Sparks NV)
Allis Chalmers, 1935, complete tractor but engine stuck. Would like to trade for restorable hit & miss engine. Stanley McCoy 775-623-3784 (Winnemucca NV)
Allis Chalmes WD single front, only 1074 made, good tires, runs good, new paint, $1650; Russ Shorten 406-962-3912 (Joliet MT)
Bombardier J5 Muskeg tractor, restored; call 253-863-2406 or cell 253-405-3578 or nodnylkram@aol.com (Sumner WA)
Case 900, 1959, sn 8148706, very nice looking tractor with great tin and paint, like new 18.4x34 Goodyear radials on the rear, good tractor for the 59 and older pullers, $4000; George Best 503-649-3576 (Beaverton OR)
Case 930, 1964, restored, engine overhauled, tin perfect, wide fenders, good puller; Arnold Beaudry 503-632-3692 (Beavercreek OR)
Case carburetor, no rust, needs kit Zenith 8964-A, fits CC or D series. $50 plus S&H; Don Green 360-275-7275 (Allyn WA)
Case CC, 1937, pulling tractor, sn 454068. 4-1/16 pistons, proper camshaft, Wards cross bar tires, 31 tooth sprockets, hot mag for pulling, brakes & pto removed, 6128A head, block tapped to provide oil to valve train & oil gauge, stock appearing carb by MOTEC, DC clutch with CC right hand lever (forward to engage), stock drawbar machined to fit 8" forward, hitches 18" and 20", wheel weight, quick change brackets on rear wheels uses IHC weights, empty weight about 3500 lbs, THIS IS NOT YOUR GRANDFATHERS CC!, $5500; Bill Wilson 406-827-3006 (Thompson Falls MT)
Case D, 1943-51, runs good, good hydraulics, front loader, $1000, selling for uncle; 916-961-8152 or email Randy O'Rouke rorourke@bishoppowers.com (N. CA)
Case D, wide front, $950; Dick Good 541-928-7933 (Tangent OR)
Case DC, 1939, sn 4303321, excellent correct fenders, chrome strips, good paint, fair tires (1 rear has boot), starter switch not correct, has proper throttle and instrument panel; $2750; Bill Wilson 406-827-3006 (Thompson Falls MT)
Case DC, 1949, narrow front, excellent tires, excellent runner, hydraulics, with trip loader that needs work, $1100; David Santoro 503-330-8199 (Newberg OR)
Case DO orchard, sn 5522544, very complete, remote hydraulics, new steer tires, wheel weights, engine stuck, $800; Aaron Gully 530-243-4587 (Redding CA)
Case L, 1929, good tires, sheet metal, manifolds, etc, stuck, $650 or parts; Russ Shorten 406-962-3912 (Joliet MT)
Case L, 1930, on steel with extensions, all original, good metal, engine partially apart, $1300; Jim Gardner 503-429-5320 or oldironjim@netscape.net (Vernonia OR)
Case LA, 1947, restored. Good tires, includes manuals, $5000 obo; Larry Chapman 503-663-7283 weekends & evenings (Boring OR)
Case parts: DC & CC parts, includes all C & D series complete rear end DC (not eagle hitch series) includes 1 set wheel weights & fenders, no rims, $150. Other DC fenders, heads, rebuilt carbs, crankshafts. CC rear sprockets, new O-rings for bottom of liners (sleeves), other parts too numerous to mention; Bill Wilson 406-827-3006 or billsbarn@webtv.net (Thompson Falls MT)
Case R, 1935, single front tire, runs, good metal, needs rear tires, $2500; Jim Gardner 503-429-5320 or oldironjim@netscape.net (Vernonia OR)
Case rear steel wheels casting # 5610; Fred Funk 208-877-1698 or funke@moscow.com (Deary ID)
Case SC, stuck, good for parts, rear wheel froze, $250 obo; CT Coil 509-738-4178 (Kettle Falls WA)
Case S-SC hood, good condition, $50; Ken McDonald 360-896-5114 (Vancouver WA)
Caterpillar 15, PV series, motor apart, good undercarriage, $500; Dennis Gullick 707-485-0956 (Redwood Valley CA)
Caterpillar 22 parts: AC fuel pump, fresh overhaul by Philbin Co., $85; cylinder head, fresh machine shop overhaul with new Cat exhaust valves and guides, $375; freshly overhauled water pump with new stainless shaft, $150; Olsen's complete engine gasket set, $200; new heavy duty radiator core from General Radiator, $300; American Bosch magneto, fresh overhaul, $250; Zenith K5A carb, fresh rebuild, $175; Perry Griffin 209-966-5285 or perryg@sti.net (Mariposa CA)
Caterpillar 22, have 2; Jim Zimmerman 641-982-4207 (Orchards IA)
Caterpillar 22, orchard, 12F28XX, motor free, clutch okay, metal good undercarriage 85%, $2500; Doug Peltzer 559-784-8116 (Porterville CA)
Caterpillar 22, restorable, complete, engine stuck, extra parts, $750; Jerry McClaughry 503-789-8912 anytime or 503-649-1704 after 5:00 p.m. (Salem OR)
Caterpillar 30, PS 6478 wide gauge, no carb or manifold; Jim Zimmerman 641-982-4207 (Orchards IA)
Caterpillar 60, have 2, no carbs or manifolds; Jim Zimmerman 641-982-4207 (Orchards IA)
Caterpillar D2 wide gauge. 5 U 8957. Electric start pony motor, orchard seat model, hydraulics for disc. Good undercarriage. With 2 bottom plow if wanted. Good condition, $3600 obo; Would consider blacksmith power hammer for part trade; Bernie Swetz 707-546-2772 or bjswetz@earthlink.net (Santa Rosa CA)
Caterpillar D-4 parts on pallets; Mike Nugent 509-877-6234 (Toppenish WA)
Caterpillar D-4 parts on pallets; Mike Nugent 509-877-6234 (Toppenish WA)
Caterpillar D-4, 1938-40, good running diesel motor, pony hard starter, rope-start with fresh rebuild on mag. Has Issacson Tracdozer hyd blade, painted highway yellow. Could be a worker, $2000 or tractor trade; Craig "OX" Ochsner 253-891-1776 or ox425@hotmail.com (Sumner WA)
Caterpillar D4-7U parts, no u/c parts; Jim Zimmerman 641-982-4207 (Orchards IA)
Caterpillar D-6 D, 1981, dozer with full ROPS & cage. Final drives rebuilt both sides & recent engine rebuild. Undercarriage 80%. Blade 4-way dirt push. Entire cat very good condition, $34,500; Dave Pearsall 360-866-9552 or cell 360-701-3800 or lowerpugetsound@comcast.net (Olympia WA)
Caterpillar D7, 3T; Jim Zimmerman 641-982-4207 (Orchards IA)
Caterpillar diesel engine and Clark 5-speed transmission. 1970's Cat 1140, rebuilt, new rings, bearings, heads rebuilt by B&R Block, rebuilt injectors. New clutch, pressure plate & t/o bearing. Clark 5 speed transmission as pulled from 1-1/2 ton Ford truck. Engine & trans manuals included. Engine needs minor finishing. $2000 invested, BEST OFFER, local pick up only; Eugene Borsoff 916-451-0893 or sgene@earthlink.net (Sacramento CA)
Caterpillar fuel injection test unit, four station, has some tooling & gauges missing, will test pumps from 1937 & up; Jim Zimmerman 641-982-4207 (Orchards IA)
Caterpillar RD8, have 2, no u/c parts; Jim Zimmerman 641-982-4207 (Orchards IA)
Cletrac 20 crawler, tracks removed & put on rubber for a tractor (?) engine un-stuck, $500 obo; CT Coil 509-738-4178 (Kettle Falls WA)
Earthmaster model C, 194?. Runs okay, hydraulics work, new battery. Disc harrow, plow, grader blade, sickle bar. Original parts list manual, $1000 obo; Peter Brown 360-653-3944 or pd_brown4@hotmail.con (Lake Stevens WA)
Farmall A, 1940, runs excellent, rubber fair, new paint, hood & grill thin, $1950, email for pics; Clay Shorten 503-625-4697 or btbear@spiritone.com (Newberg OR)
Farmall A, 1941, good tin, runs good, good tires, $1275; Warren Harger 541-855-7340 (Central Point OR)
Farmall B, 1941, wheel weights, new tires all around, sickle bar, runs, $1900; Gary Parrett 503-965-6429 (Pacific City OR)
Farmall Cub with factory side-mount fertilizer spreader, good runner, good sheet metal & tires, $1850 or $1550 without spreader; David Pearsall 360-866-9552 shop or cell phone 360-701-3800 or email for photos
lowerpugetsound@attbi.com (Olympia WA)Farmall Cub, 1949, complete restoration engine rebuild, new pistons & rings bored to fit, bearings seals & gaskets. The rest of the tractor got all new seals & bearings new fluids. Professionally rebuilt. Painted with acrylic enamel. Includes gearbox on finals for rototiller. New front tires & tubes, new rear tubes, brakes, clutch powder coated rear rims, all new electrics. Nothing overlooked, like new machine. A real sweetheart to work, includes Howards rototiller, blade & plow, $3600 obo; Mike Evans 425-337-7367 or evansm137@cs.com (Bothell WA)
Farmall H, 1949, tri-cycle, tires fair, very good condition and good paint, runs well, $2000; Phil Mehl 559-733-9271 after 6pm (Visalia CA)
Farmall H, 1953, with tricycle front, good paint & tires, good working 3-pt hitch with 7 ft box scraper, $1800; Al Norwood 760-347-6462 (Indio CA)
Farmall M tractors: Four, lots of differences, 1939-1950. Three have NF, one with Dual Narrow. Tow are kero/gas, two are regular. All have good back tires, with air, two have good front tire/s. One cotton Harvester sn , all have front lights, some have back lights. All run excellent. Three battery ignitor, one magneto. All are full of water, some with antifreeze. All have the little grill insert, two have perfect sheet metal, two are nearly perfect. None have mufflers. One has MW hand clutch, three have rear wheel weights, three have belt pulley attachments, only one has a pulley but I may have some pulleys. Cotton Harvester does not have a belt pulley attachment. Buy all four for $4000 or individually $875 to $1250; DJ Baisch 208-525-2071 or ihorse@srv.net (Idaho Falls ID)
Farmall O4, 1947 parts tractor, $195; Al Norwood 760-347-6462 (Indio CA)
Farmall oval instrument panel for amp meter, has switch for generator, no gauge, $20; Ken McDonald 360-896-5114 (Vancouver WA)
Farmall regular, tricycle front, spoke wheels, all four, $800; Guy Stauffer 541-724-5252 (Adrian OR)
Farmall Super A with machine shop rebuilt engine, hydraulics, pto, good
rubber and sheet metal. This machine is ready to work. $2450; David Pearsall
360-866-9552 shop or cell phone 360-701-3800 or email for photos
Farmall Super C, 1953, tin in good shape, delivery might be possible, $475; Warren Harger 541-855-7340 (Central Point OR)
Farmall Super M, power steering, Swartz wide front, runs good, good tires, $2450; Russ Shorten 406-962-3912 (Joliet MT)
Farmall Super MD, 1952, wide front, all original, $2500; Guy Stauffer 541-724-5252 (Adrian OR)
Farmall Super MTA with F-11 loader, all original, runs great, $4500; Guy Stauffer 541-724-5252 (Adrian OR)
Ferguson 20, new paint & step up trans, with box scraper, $1800; Al Norwood 760-347-6462 (Indio CA)
Ferguson TE-20, rebuilt, new paint, good tires, Howard gear for rotovating, converted to 12 volt system, $2800 obo; Dennis Short 425-379-0670 (Everett WA)
Ferguson TO-20 complete head & valve cover & manifold, $195; Al Norwood 760-347-6462 (Indio CA)
Ford 1953 with new rear tires & box scraper, $3100; Al Norwood 760-347-6462 (Indio CA)
Ford 1954 with front loader, box scraper & power steering, $4800; Al Norwood 760-347-6462 (Indio CA)
Ford 2000 with front loader & power steering. Loader is off but complete; Al Norwood 760-347-6462 (Indio CA)
Ford 2N with 3 pt & pto, runs very strong, sheet metal good, but last owner must have painted with a broom. Paint is nice & thick so no rust; $1350; David Pearsall 360-866-9552 shop or cell phone 360-701-3800 or email for photos
lowerpugetsound@attbi.com (Olympia WA)Ford 5000 diesel, 1970, with cab. Has Select-o-Speed transmission, all gears work good, good paint & tires, $2600; Al Norwood 760-347-6462 (Indio CA)
Ford 600-800 hydraulic pump, $350; Al Norwood 760-347-6462 (Indio CA)
Ford 8N, good solid original 1948, engine rebuilt but needed oversize sleeve & didn't get it, $1500 firm; CT Coil 509-738-4178 (Kettle Falls WA)
Ford 8N, major engine rebuild, excellent tires & sheet metal. New paint. 3 pt, PTO, 12 volts, includes front loader, $3600; Hardy McFarland 530-671-2258 (Sutter CA)
Ford 9N, engine just rebuilt, sleeves, pistons, valves, etc. Has new wheels front & back. Sherman 2-speed, 12 volt electrics. Tractor is in excellent condition but needs a paint job, $2800 obo; Russ Raymond 509-925-5283 (Ellensburg WA)
Ford Industrial auxiliary transmission, over & under & standard, $400; Lyle Jorgenson 801-721-5968 (South Weber UT)
Ford model 2000, 1970, gas with roll bar, turf rear tires, floatation in front, power steering, excellent running tractor, $3100; Al Norwood 760-347-6462 (Indio CA)
Fordson F, 1921, with after market magneto. On steel, needs repairs, engine free, $750; Richard Severson 253-531-6006 (Tacoma WA)
Front loader & bucket from Massey Harris 35, $1000; Hubert Bierly 541-389-8963 (Bend OR)
Gearmatic model 8A with adaptor plated for John Deere 40C. Includes master cylinder & stabilizing rods. Sides of drum have been hard surfaced for durability. Entire unit appears to be in excellent condition. Will fit many other applications., $1250; David Pearsall 360-866-9552 or cell 360-701-3800 or lowerpugetsound@comcast.net (Olympia WA)
Gearmatic winch model 8A with adaptor plate for John Deere 40C crawler & 420 crawler with stabilizing rods & master cylinder control. Condition good, will fit many other applications, $1450; Dave Pearsall 360-866-9552 or cell 360-701-3800 or lowerpugetsound@comcast.net (Olympia WA)
IHC Cub parts: pair of wheel dish inserts, $95; Cub carb, $65; Jim Robinett 206-713-3441 or tractrmnul@aol.com (Federal Way WA)
IHC T-9 crawler, winch, blade & canopy, new hydraulic hoses, cylinders. Invested $4000, asking $3100 obo; Jim Robinett 206-713-3441 or tractrmnul@aol.com (Federal Way WA)
Injector pump stand for John Deere 2 cyl tractors. Includes extra nozzles & some injector pumps & misc. parts, $1000; Larry Lengkeek 208-438-8867 or cell 208-670-1977 (Hazelton ID)
International 240 U loader tractor, $2200; Chuck Kaufman 541-354-1065 or acme@gorge.net (Hood River OR)
International 240, gas, used last 15 years mowing fields, 3pt, pto, tires fair, runs good, good sheet metal, $2500 firm; Yvonne Selsor 707-577-8936 (Santa Rosa CA)
International B 275 diesel with box scraper, good running tractor, $1795; Al Norwood 760-347-6462 (Indio CA)
International Harvester, O-6, runs good, good rear tires, overall okay, $750; Doug Peltzer 559-784-8116 (Porterville CA)
International O4 (orchard), recent overhaul on engine, runs great, mechanically in top shape. Orchard fenders are missing, $2400; Russ Raymond 509-925-5283 (Ellensburg WA)
International T-340 crawler, 1959, 4 cylinder gas engine works all day at 1200 rpm, 6-way hydraulic blade. Very light, easy to transport, 2-way carco winch. New carb, starter, alt. new fluids, radiator, service, all hoses new & converted to 12 volt. Includes service & parts manuals, ready to work, $6200 obo; Mike Evans 425-337-7367 or evansm137@cs.com (Bothell WA)
International TD-9 crawler, needs work, good parts or fixer upper, $1500; Walter Reichel 360-894-2438 (Yelm WA)
John Deere 2010 diesel wheel tractor parts, but no wheels or tires; Russ Raymond 509-925-5283 (Ellensburg WA)
John Deere 3250, 1984 with cab, AC works good, nice upholstery, new seat, $7900; Al Norwood 760-347-6462 (Indio CA)
John Deere 3325 diesel five gang reel mower. Mow lots of grass fast & easy. Complete rebuild from ground up, looks brand new, new list $30,000 plus; asking $12000. Have tech, parts & op manuals; Myron Peterson 509-539-5400 or MyronDar@aol.com (Pasco WA)
John Deere 40C, 3 roller, being parted out, with MC 1000 blade, 14" pads with new pins and bushings and master link; Ralph Newman 541-472-9196 (Wolf Creek OR)
John Deere 40-U, wide front, $2500; Dick Good 541-928-7933 (Tangent OR)
John Deere 420C, with dozer, mechanically rebuilt and repainted, reverser and 5 roller track, 12 volts, sn 126553, $5500 obo; R Edwards 714-998-0839 or 714-287-2941 (Villa Park CA) [see photo]
John Deere 520 N, ps, runs, needs repairs on carburetor, manifold, clutch, governor, sheet metal average, $1250; Doug Peltzer 559-784-8116 (Porterville CA)
John Deere 60, NF, good all-round original tractor, runs, rears good, car on front, $1200 or trade; DJ Baisch 208-525-2071 or ihorse@srv.net (Idaho Falls ID)
John Deere 620, 1958, with dual hydraulics, power steering, 3 pt hitch & more, 5655 hours, runs & works good, $2400; Bill Lengkeek 541-926-8494 or cell 541-619-8896 (Tangent OR)
John Deere 70 diesel, 1955, total restoration with complete sand blasting, including inside & out on rims, with new rubber, wide front, power steering, looks & runs like new, $6500 obo; Myron Peterson 509-539-5400 or MyronDar@aol.com (Pasco WA)
John Deere 70 gas 1954 parts: engine block, cylinder head, pistons, rods, $500 obo; Cy Albers 425-228-3430 (Renton WA)
John Deere 7020, 1973, sn 003057R, 7461 hrs, type T377R. Duals, cab, runs excellent, uses no oil, field ready, 4wd, $5700; Chuck Postma 360-354-4625 (Lynden WA)
John Deere 720, 1957, gas, wide front, good running tractor, power steering, 3pt live pto and live hydraulics, all new seat, paint, decals, front wheels and tires, and brakes, rebuilt engine, super puller at 9000 lbs, $5000 with manual; Glen Carrigan 509-773-4955 (Goldendale WA)
John Deere 730 diesel, electric start, wide front, 1960, $6000; Dick Good 541-928-7933 (Tangent OR)
John Deere A, 1938, runs good, spokes front & rear, hood, gauges, $3200; Jerry Sjaastad 208-495-2025 (Melba ID)
John Deere A, 1939, with power lift, runs good, sn 486023, painted, looks good, been cared for, $3000; Rita Wheeler 530-284-7586 (Greenville CA)
John Deere A, 1947, slant dash, runs & looks fair, needs restoration, $1000; Myron Peterson 509-539-5400 (Pasco WA)
John Deere A, 1948, rollomatic front, engine rebuilt, .090 over pistons, clutch rebuilt, new steering wheel and seat, all new wiring, lights, rebuilt starter and generator, new battery and gauges, tires 60-70%, $4500 obo; Aaron Gully 530-243-4587 (Redding CA)
John Deere A, 1948, sn 596442 with #50 JD loader, $1500; Fred Funk 208-877-1698 or funke@moscow.com (Deary ID)
John Deere A, styled, with loader, $1850; Dick Good 541-928-7933 (Tangent OR)
John Deere B, 1941, with generator that did run a house, sn 118005, painted, runs good, been cared for, one tire is flat, $4600; Rita Wheeler 530-284-7586 (Greenville CA)
John Deere B, 1945. Wide front anteater nose, nice tractor, rare B-G hydraulics, $3500; Olaf Skrogstad 206-242-6905 (Seattle WA)
John Deere B, 1946, new tires, paint & decals, flat back electric start, $2500; Olaf Skrogstad 206-242-6905 (Seattle WA)
John Deere B, 1948, with Powertrol, sn 236093, runs good, needs paint, $2000; JD B, 1948, sn 216843, with Powertrol, paint faded, $2300; Rita Wheeler 530-284-7586 (Greenville CA)
John Deere B, 1950, straight tin, runs good, $1200; Guy Stauffer 541-724-5252 (Adrian OR)
John Deere B, 1952, farm fresh, new tires, battery, runs good, straight sheet metal, $1700 obo with manuals, also has complete Yakima hitch; Glen Carrigan 509-773-4955 (Goldendale WA)
John Deere BN, styled, 1945, hand start, $1200; Dick Good 541-928-7933 (Tangent OR)
John Deere BR, electric start, 1945, $3500; Dick Good 541-928-7933 (Tangent OR)
John Deere Bs: 1937 B, runs good, $2300; 1937 B, overhauled, painted, spokes front & rear, $3100; Jerry Sjaastad 208-495-2025 (Melba ID)
John Deere clamp-on duals, 12x38 rims & all mounting hardware, no tires. Removed from original low hours 630. Clean, minor rust, $400; Jim Temple 541-935-7567 or sjt89not@epud.net (Noti OR)
John Deere D, 1927, sn 46913. Older restoration, stored in barn, turning brakes, round cutoffs on front & flat on the rear. Good tires, easy to start, runs great. Can email photos. $3500; Tom 208-880-1819 or ticvac@safelink.net (Nampa ID)
John Deere D, 1944, electric start, lights, pto, round front, solid rear, good Firestone 14-30 23, runs good, $3500; Jerry Sjaastad 208-495-2025 (Melba ID)
John Deere early 3pt upper lift arms for square shaft. New reproduction, $80 pr; Ken McDonald 360-896-5114 (Vancouver WA)
John Deere G, 1939, solids front & rear, runs good, painted, hood, no shutters, muffler, flat back, $5300; Jerry Sjaastad 208-495-2025 (Melba ID)
John Deere G, 1947, Rollomatic front, 3 pt, good tin, runs good, $3250; Chuck Tillman 208-466-1796 (Nampa ID)
John Deere G, 1949, runs good, 3 pt, $2900; Jerry Sjaastad 208-495-2025 (Melba ID)
John Deere G, 1950, modified stock puller, Armstrong 15.5-38 cut rear, weighs 6990 with driver, $3600; Jerry Sjaastad 208-495-2025 (Melba ID)
John Deere G, styled, hand start, 1945, $3200; Dick Good 541-928-7933 (Tangent OR)
John Deere H, 1946, sn 57851, runs well, no hydraulics, partially disassembled in prep for painting, all parts there, $2000; Rita Wheeler 530-284-7586 (Greenville CA)
John Deere heavy duty front tires & rims (2), Armstrong tru-trac multi rib 16.5L-16.1SL tires on 8 hole 3" center rims, with fluid, excellent shape, $275 for set; Mike Nugent 509-877-6234 (Toppenish WA)
John Deere heavy duty front tires & rims (2). Armstrong tru-trac multi-rib, 16.5L - 16.1 SL tires, on 8 hole 3" center rims, excellent shape, $275 for set; Mike Nugent 509-877-6234 (Toppenish WA)
John Deere L, 1939, good rubber, bad crankshaft. Engine apart, has plow, disk, cultivator & spring tooth harrow. Shedded at all times, worked until 45 days ago, $2000 obo; Richard Severson 253-531-6006 (Tacoma WA)
John Deere LI motor free, poor tires, no tag, has hydraulics & mower, $1500; Doug Peltzer 559-784-8116 (Porterville CA)
John Deere LA, sn 12671, excellent condition, $2000 obo; Jerry Isakson 503-668-5608 (Sandy OR)
John Deere Lindeman crawler tractor in excellent shape. 1945. Not worked hard. Tracks & drive sprockets like new. Restored; call 253-863-2406 or cell 253-405-3578 or nodnylkram@aol.com (Sumner WA)
John Deere Lindeman crawler, 1946, $5500; Dick Good 541-928-7933 (Tangent OR)
John Deere Lindeman, 1944?, farm fresh but pretty nice condition, has a nice Lindeman blade, but does not have Lindeman hydraulics, I'm considering taking all the blade stuff off the crawler and possibly selling it separately, $6300 for everything; George Best 503-649-3576 (Beaverton OR) [see photo]
John Deere M with 3 pt & pto, runs very strong, sheet metal good, $2650 or $2350 without 3 pt; David Pearsall 360-866-9552 shop or cell phone 360-701-3800 or email for photos
lowerpugetsound@attbi.com (Olympia WA)John Deere M, $1750; Dick Good 541-928-7933 (Tangent OR)
John Deere M, sn 49240, 12 volt, new seat, paint, $1200 obo; Jerry Isakson 503-668-5608 (Sandy OR)
John Deere R, 1951, good sheet metal, runs good, trade possible, delivery possible, $3000; Warren Harger 541-855-7340 (Central Point OR)
John Deere R, 1954, sn 20522, sheet metal good, engine overhauled, pony runs good, big engine excellent, tires fair, $4500; Chuck Postma 360-354-4625 (Lynden WA)
John Deere tractor parts: G sn 28247, very nice wide front axle, no breaks or welds, split pedestal; B late electric start, 5 speed; B sn 113394, hand start; A sn 633931, electric start; D 1935, sn 120000; M and MT parts, 1 complete tractor; Aaron Gully 530-243-4587 (Redding CA)
Kay Brunner steel wheels & rims for 1929 John Deere D; Fred Funk 208-877-1698 or funke@moscow.com (Deary ID)
Long 350 tractor, has nice Freeman loader, diesel engine, power steering, needs transmission work, $3000 obo; Fred Gilbertson 541-942-7086 or FJGFarm@aol.com (Creswell OR)
Massey Harris Pony, sn 15958, $1800 obo; Jerry Isakson 503-668-5608 (Sandy OR)
McCormick Deering T-20, sn St5495, steering, clutches, brakes, clutch & undercarriage very good. Engine works needs valve & ring job. Bottom end is good, runs nice; Xerrell Clifton 661-822-4824 or daisyclifton@hotmail.com (Tehachapi CA)
McCormick Deering W-6, wide front, good tin, 40% rubber, runs strong, $1550; Don Studier 541-754-1338 (Corvallis OR)
Minneapolis Moline G1000, 1966, sn 32700127, good sheet metal, runs good, 540-1000 pto, remotes, amplitorc, $4000; Chuck Postma 360-354-4625 (Lynden WA)
Minneapolis Moline L Uni-Tractor First Series, stuck, complete including original manual; Russ Shorten 406-962-3912 (Joliet MT)
Minneapolis Moline parts, have lots of tractor and machinery parts, new old stock parts; Chuck Postma 360-354-4625 (Lynden WA)
Minneapolis Moline R with front loader & power steering, good rubber front & rear, $1250; David Pearsall 360-866-9552 shop or cell phone 360-701-3800 or email for photos
lowerpugetsound@attbi.com (Olympia WA)Minneapolis Moline RTS, 1949, good farm tractor, hydraulics, pto, used everyday, like new tires, straight sheet metal, $2000 obo with manuals; Glen Carrigan 509-773-4955 (Goldendale WA)
Minneapolis Moline U, 1945, very good parts tractor, $275; Warren Harger 541-855-7340 (Central Point OR)
Minneapolis Moline UTS, 1946, sn 327529S, runs good, some engine work done, 4 new tires & rims, painted & restored, $1700; Chuck Postma 360-354-4625 (Lynden WA)
Minneapolis Moline UTU propane, good tires & sheet metal, complete, including original manuals, loose, $675; Russ Shorten 406-962-3912 (Joliet MT)
Minneapolis Moline Z, 1952, new paint & decals, narrow front dual wheels, good tires, runs well, $1000; Bill Wilson 406-827-3006 or billsbarn@webtv.net (Thompson Falls MT)
Minneapolis Moline ZAS sn 00702300, 1953, runs good, needs restoring, last year made, $1700; Chuck Postma 360-354-4625 (Lynden WA)
Minneapolis Moline, engine out, doesn't currently run, make offer; Rita Wheeler 530-284-7586 (Greenville CA)
Oliver 70 parts, cheap, front wheels & fenders gone, motor has block only, $50 per ton (junk price); Bill Wilson 406-827-3006 or billsbarn@webtv.net (Thompson Falls MT)
Oliver Hart-Parr 70 parts/parts tractor: fenders, transmission, hood, radiator; Alan Schurman 360-887-8156 or ironranch@aol.com (Ridgefield WA)
Oliver HG 68: have 2 each tracks, undercarriage, rear end & trans, $500 for all; Lyle Jorgenson 801-721-5968 (South Weber UT)
Oliver HG crawler tractor, complete rebuild on engine, need hydraulic angle blade installed, have all hydraulic parts to install with blade, good condition, $2750; WF Henderson 503-843-3692 (Sheridan OR)
Road Graders: 2 small, Adams, and Russel Jr, $1250 each; Martin Dennis 208-362-9777 (Boise ID)
Tire: 18.4 - 26 8-ply rating Firestone, at least 50% tread, good tire, $60; David Santoro 503-330-8199 (Newberg OR)
Tractor weights: John Deere, Case, Massey Ferguson, $30 to $40 each; Mike Nugent 509-877-6234 (Toppenish WA)
Valmet 15 tractor, 1954 (the first Valtra model). $1700 US dollars. Tractor located in Finland; I can arrange shipping to Los Angeles area
. Please contact me by email for details: Juha.paavola@tut.fi (Finland) [ed note: Juha has been a WAIT subscriber for over a year]Versatile D145, sn 76409, 1969, 180 hp V8 Cummins engine with about 100 hrs on it. Duals, cab, 4 wd, remotes, 6425 hrs, runs excellent, field ready, $5000; Chuck Postma 360-354-4625 (Lynden WA)
Wheel weights: for John Deere, Case, Massey Ferguson, $30-40 each; Mike Nugent 509-877-6234 (Toppenish WA)
Wheel weights: Ford 9N rear weights, $150 pair; Clark Monson 775-846-6385 or drillmow@amigo.net (Sparks NV)
Wheels: Ford 8N rear wheels, original style, $150 each. Ford 8N 16" front wheels $45 each; Clark Monson 775-846-6385 or drillmow@amigo.net (Sparks NV)
Wheels: Ford 9N rear wheels, $75 each; Clark Monson 775-846-6385 or drillmow@amigo.net (Sparks NV)
Yanmar 15D 4 wheel drive tractor, front loader, $4750; Rick DeJager 541-475-3459 (Madras OR)